ifi NEO Stream Network Audio Streamer User Guide

ifi NEO Stream Network Audio Streamer

Quick Start Guide

1. Power
   

   • A power supply unit must be able to deliver minimum rated repetitive current.

2. Input
   
   

   • Only one ethernet connection shall be used at any given time.

3. Output
   
   

Before using NEO Stream, review the NEO Stream User Manual at https://ifi- audio.com/product-guides/

Wi-Fi Set-Up

1. Connect Wi -Fi antenna and power supply DAC, Amplifier or Active Speakers via S/PDIF, RCA or USB
   • A power supply unit must be able to deliver minimum rated repetitive current.
2. Power on
3. Select Hotspot and set to ON
4. In your device’s Wi-Fi setting, connect to ‘iFi-Streamer’
5. Enter “http://ifi.local” or “192.168.211.1” Enter “192.168.211.1”
6. Connect the iFi-Streamer to your local Wi-Fi network
7. Network status LED
8. Connect device back to local Wi-Fi network (If not already connected)
9. Go to Music Streaming section

Ethernet Set-Up

1. Connect LAN and power supply DAC, Amplifier or Active Speakers via S/PDIF, RCA or USB
   • A power supply unit must be able to deliver minimum rated repetitive current.
2. Power on
3. Ready to connect
4. IP address will show once connected

Music Streaming

• Other compatible apps are available

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>