DARANEMER DN200A Portable Power Station 300W User Manual

: June 14, 2024
: DARANEMER

DARANEMER DN200A Portable Power Station 300W

Product Information

Product Name: PowerStation
Input Voltage: 100~120VAC 50/60Hz
Weight: 2.8KG (6.17lb)
Size: 130x180x220MM (5.1×7.08×8.66IN)
Discharging Temperature: Not specified
Charging Temperature: Not specified
Input/MPPT: 12V 3A
Output: PD60W, QC3.018W, QC3.018W
DC ON/OFF
AC ON/OFF
AC Output : Not specified

Product Usage Instructions

Using 12V Cigarette Lighter to Charge PowerStation:
To charge the PowerStation, connect it to a 12V cigarette lighter using the provided cable.
Use in Cold Weather:
The PowerStation can be used in cold weather, but specific temperature ranges are not mentioned. Ensure the product is operated within suitable temperature limits.
Hibernation Mode:
The PowerStation automatically switches to hibernation mode when there is no load to save power. You can activate hibernation mode by pressing any function button or by connecting any external device.
Discharge of the PowerStation:
To extend the battery life, it is recommended to control the normal discharge of the PowerStation within the 1C discharge range (i.e., total output power of 240W). When the battery level drops below 10%, the AC inverter output will be turned off, and the remaining 10% power will be used to power USB devices. Please charge the power station in time.

Note: Please read the manual carefully before using!
*Based on providing better products and experience, DaranEner is constantly optimizing and updating products, the specifications and descriptions of the user manual may be changed and are subject to without notice.

Disclaimers

We are not responsible for any damage caused by use under abnormal conditions, including force majeure (typhoon, ground settlement, fire, earthquake, flood, lightning, abnormal voltage, other natural disasters, and other natural disasters), acts of third parties, other accidents, intentional or negligent misuse/failure caused by the customer.
If accessories and this product are damaged, please do not repair them yourself.
We are not responsible for any damage caused by disassembly or repair by yourself.
The warranty coverage applies to the terms of use, and anything not specified is not covered by our warranty.
If the instructions in this manual are not followed or used improperly, the product may be damaged or damage the surrounding device or cause personal injury. We are not responsible for any loss or damage caused by the above. In addition, we are not responsible for any modifications made to the product by the customer that are beyond our warranty terms.
We are not responsible for any collateral damages (including loss of business profits) caused by misuse or modifications to the product, or damages caused by malfunctions of the connected devices which not related to us.
We cannot confirm or guarantee that this product can be used with medical equipment that involves personal safety. We are not responsible for any damage caused by the use of medical equipment.
Products purchased from non-authorized sellers are not covered under warranty. In addition, we are not responsible for any damages and collateral damages. caused by the use of products sold by non-authorized sellers.
Deterioration of the battery is not covered by the warranty.

Important Safety Instructions

Please keep this “User Manual” in a safe place.
This manual contains installation, operation, and use instructions for the
DaranEner Portable Power Station NEOZ.

Please ONLY use DC ≤ 30V or AC 100V-120V 60Hz AC power source. Please do not use other voltages to charge, otherwise, it may cause the product and battery to overheat, fire, and explode.
Please fully charge the power station before using it for the first time.
When the equipment is connected to the power station, please confirm whether the equipment specifications are consistent with the power station nameplate.
Please ensure that no short circuit is caused when connecting the external device to the power station.
Children can not aware of the dangers of electrical equipment, please keep the power station out of the reach of children.
Do not attempt to disassemble or modify any part of this product that is not described in this manual. Disassembly or modification of this product may cause serious accidents. Internal inspection or repairs should be handled by the dealer of the product or the manufacturer.
Do not use this product with equipment related to life safety such as medical/ or essential social or public equipment such as emergency equipment.
Do not use equipment that requires stable and accurate waveform, frequency, and voltage output. We are not responsible for any damage caused by the use of these products.
Do not put any objects (especially metal objects) into the power station throug the heat vent or interface.
Do not replace or modify the battery pack.
Do not touch the metal part of the DC and AC interface without protection.
Do not immerse the product in water or splash water on it. Also, do not use this product when its surface is wet, as this may cause fire, electric shock, or malfunction.
Please place the power station in a dry place, do not place the power station in a corrosive, acid-base, flammable & explosive gas, dusty, rainy, or humid environment.
Please ensure adequate ventilation during use, always maintain at least 5cm (2 inches) of ventilation space around the power station. Ensure that flammable| and explosive objects are kept away from the charger adapter.
In extreme situations, liquid may be leaked from the battery, please avoid contact with battery liquid, if accidentally contacted, please wash with clean water. If the liquid splashes into the eyes, please go to the hospital for treatment asap.
Do not drop or place heavy objects on the product. Please avoid impact on the product
This product cannot be carried on an aircraft or shipped by air.
When the device is not used for a long time. Please make sure to charge the power station at least every 30 days, to ensure the cycle life of the battery pack.
Keep the workplace where the machine is placed clean, a messy workplace may lead to accidents. If foreign objects enter the machine by accident, it may cause short out, smoke or fire.
Do not store the product where the temperature may rise above 50°C (50°F) (e.g. in a metal case or in a car in summer). This may cause deterioration of the product or the battery and may cause smoke or fire.

Use Instructions

Parts Name & Function

Panel Function

LCD Display: Display the working status of the power station.
USB-C port: Support PD 60W output. Compatible with various PD protocol devices.
DC5521 Input Port: 10V-30V 3A Max 90W input. Adapter and solar charging interface.
DC Port:12V output port, the maximum output current is 3A.
USB A port x2: Compatible with Quick Charge 3.0 fast charging, maximum output 18W for each port.
DC Switch Button: Short press to activate USB, DC5521 output. Short press again to turn off all DC outputs.
DAC Switch Button: Short press the AC switch for 1 second to activate the AC output short press again to turn off the AC output.
AC Output Port: For matching the AC output voltage devices.
LED Light Bar: With 3 levels of brightness, flashing mode, and SOS mode.
LED switch button: Short press to light up (30% brightness), short press again toswitch to 60% brightness, 100% brightness, flashing mode and SOS mode, and long press to turn off the LED light.
AC Input Port: AC input cable connection socket

LED Screen Display

Power Indicator: Each block represents 10% of battery power.
Power Percentage Indicator: The digital display shows the precise percentage of the current remaining battery power.
50Hz Frequency Indicator: When the output frequency is 50Hz, this icon will light up.
Input/Output Indicatorpower: When the power station has input/output, the digital display is the current power.
60Hz Frequency Indicator: When the output frequency is 60Hz, this icon will light up.
Output Indicator: This icon lights up when the power station has any output.
DUSB Indicator: When the DC power is turned on and there is USB output, this icon will light up.
AC Indicator: When the AC is turned on and there is AC output, this icon will light up.
DC Indicator:When the DC output is on,this icon will light up.
PD indicator: When the DC power is turned on, there is PD output, this icon will light up
Input Indicator: When the external power supply is charging the power station, this icon will light up
Time Indicator: Display the input and output time of the power station under the current power.
Time unit Indicator: Display the input and output time unit of the power station under the current power -minute/hour.
Alarm Indicator: This icon will light up when the device is malfunctioning (This icon will not light up when the device has no malfunctioning). BLED Light Indicator: This icon will light up when the LED is on.

Operating Instructions
Power On Operation:

DC Button
Press and hold the DC output button for 3 seconds to activate the USB-A, USB-C ports, and the cigarette socket. Short press to turn off all DC output, long press to turn off the unit.
AC Button
Press and hold the AC button for 3 seconds to activate AC output, to turn on AC output. Short press to turn off AC output, long press to turn off the unit.
LED Light Button
- Press and hold for 3 seconds to turn on the light (default brightness is 100%).
- Short press to switch between 100% brightness, 100% brightness, strobe mode and SOS mode.

Shutdown Operation:
The no-load power consumption of the power station is about 7W, in order to avoid the loss of battery power, please short press the switch button to turn off the AC/DC/LED power one by one when not in use.
Connect External Devices:
Before connecting external devices, please make sure that the working voltage of your equipment is consistent with the output voltage of the power station.
AC Frequency Switching:
Not recommended unless necessary! The default frequency is 110V 60Hz.
To switch the frequency, please press and hold the AC button and the DC button for 3 seconds.
Attention
Power Saving Mode: Press and hold the AC button and LED button for about 3 seconds to turn on power saving mode,the LCD screen will show FOl,press and hold the AC button and LED button again to turn off the power saving mode,the LCD screen will show F00.

Charging Your Power Station

Please strictly follow the instructions below to charge the power station. Charge the product only when the environment temperature is 0°C~45°C. Please use the origina charging adapter and cable.
Warning: For battery life and safety, do not charge immediately after full discharge is completed. Please wait 2-3 hours to cool down before recharging
Using AC charging cable to Charge Power Station
Connect the DC 5521 plug of the power source to the DC input port of the power station. The power block on the screen flashes to indicate charging progress, when all the power blocks stop flashing and stays on, it means the nower station is fully charapd niease unplug the nower inout in time. Using Solar Panel to Charge Power Station

A. Place the solar panel in a place where it can get enough direct sunlight and adjust the appropriate angle.
B. Connect the solar panel to the power station DC5521 input port.
Warm tip: The actual charging efficiency of the solar panels depends on various factors such as weather, temperature, sunlight, the angle of thesolar panel, etc. The actual solar charging efficiency may different

Using 12V Cigarette Lighterto Charge Power Station

A. Plug the car charger cable into the 12V car cigarette lighter socket and connect the DC end to the power station.
B. The maximum output current of the car charger needs to be within 10A to protect the safety of the car battery and power station.

Use in Cold Weather

Due to the chemical characteristics of LiFe P04 batteries, low temperature (-10- 45°C) will affect the battery capacity of the product. If you are in an environment below0°C (32°F), it is recommended to place the power station in an insulated container and connect it to a charging power source (12V car cigarette lighter/ AC adap:er/solar panel, etc.). The natural heat generated by the power station inthe insulated container will keep the battery pack efficiency at the highest level.
In an environment below 0°C (32’F), the power station cannot be charged, but car output power to other equipment.

Hibernation mode

For better power saving, the power station will switch to hibernation mode automatically when there is no load. You can activate it by pressing any function button, or by connecting to any external device.

Discharge of the Power Station

In order to better extend the battery life, the normal discharge of the power station is best controlled within the 1C discharge range (i.e. total output power of 240W).
When the battery level is below 10%, the BMS will turn off the AC inverter output, and the rest of the 10% power to power USB devices, and please charge the power station in time.

Troubleshooting

Product Specifications

Product Warranty

Warranty Policy

Claiming warranty may need your receipt and order number. We may also need toverify your identity.
We provide 2 years warranty for all DaranEner products, you can extend the warranty to 5 years by registering as a user on DaranEner official website.
During the warranty period, we will provide free repair or replacement service.
Even if the product warranty has expired, we can still provide paid support. However, we may not be able to handle peripherals (such as cables), discontinued products or parts.
We have a DOA (Detective on Arrival) period of 7 days. This means that if the product becomes defective within seven days of receipt, we will replace the item free of charge.
Even within the warranty period, if the product is damaged due to negligence such as customer disassembly, water immersion, drop, etc., or damage caused by natural disasters, this is not within the scope of free maintenance, the maintenance fees and freight will be charged.
Products purchased from non-genuine channels, such as resale second-hand products or products purchased from unknown sources, are not covered by the warranty and will not be repaired. In this case, please contact your seller for warranty support.

Disposal and Recycling

This product has a built-in LiFePO4 battery and cannot be disposed of with general household waste.
These are hazardous materials and are subject to certain transportation and disposal regulations.
Do not open or disassemble this product and recycle its battery alone.
When disposing of this product, please follow the instructions of your local government and dispose of it in accordance with the prescribed method!

Packaging List

NEOZ (1)
AC Charging Cable (1)
Car Charger Cable (1)
User Manual & Warranty Card (1)

FAQ

Q: What type of battery does DaranEner NEOZ use?
A : NEOZ adopts a new generation of LiFePO4 battery, which is high safety, long life, and good heat resistance.
Q: What should I do if there is a malfunction?
A: Please contact customer service for troubleshooting. Do not disassemble the machine by yourself.
Q: When the AC output is on, the AC outlet is not connected to the external devices, will it drain battery power in this situation?
A: When the AC output is turned on, the inverter will be started, and there is a no-load power consumption less than 10W. When the power station is not in use, please close each output interface to prevent battery power drained out.
Q: After fully charge the power station and storing it for a long time without use, how long will the battery drop to 0%?
A: When NEOZ is not in use, there is almost no natural discharge (turning off all switches).
If it is stored for a long time after being fully charged, it can still remain more than 80% of the power after 3 months. For emergency use, please check the remaining power at least every 3 months.
Q: When using the AC output, there is obvious noise, is it a malfunction?
A: It is not a malfunction. This is the sound of the cooling fan running. The fan dissipates the internal heat and keeps the battery working in a good temperature environment.
Q: Can this power station be brought on the plane?
A: NEOZ cannot be carried on aircraft or shipped by air
Q: After using it for the first time or using a period of time, the remaining battery power displayed on the LED screen is different from the actual remaining battery power. Or the battery is draining too fast.
A: The remaining power displayed on the LED screen may differ from the actual remaining power after the first use or after a period of long-term use. If this happens, don’t worry. This is because the BMS goes into learning mode. After the first use or use for a lone period of time. the battery pack needs to be fully charged and discharged twice, so that the BMS can re-learn and correct the battery power level. DaranEner is working hard to improve the accuracy of the displayed data.
Specific operation steps

Use (fully discharge) the power station to 0%.
Then charging the battery to 100% and leaving it for 3 hours or more, and fully discharging again.

( Repeat the above discharge and charge operations twice)
If the problem persists, please contact customer service.
Q: Can the NEOZ be charged while in use?
A: Yes, you can use the NEOZ to charge devices while it is being recharged at the same time.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help important announcement

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Contact Us
DARANENER
Website: https://www.daranener.com
Email: support@daranener.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>