KXAITO 3167 Men’s Wrist Watches Octagon Oak Heart of Steel Design Instructions

Operational Guide 8801

1. A key
2. B key
3. C key
4. D key

A. Function introduce

1. 6 digits timekeeping, which display Hour, Minute, Second, Day, Month, Day of Week.
2. World Time Function: Hour, Minute
3. Countdown Time Function
4. Stopwatch Function
5. Alarm Function
6. Illumination Function
7. 4 Buttons

B. Mode Selecting

   
Timekeeping                  World Time

     
Stopwatch                 Countdown Timer

Alarm

Press button B to cycle between modes as this order below:
Timekeeping Mode → World Time Mode → Stopwatch Mode → Countdown Timer Mode → Alarm mode

C. Timekeeping Mode

General Display:

Month. Day. Seconds         Hour. Minute. Seconds

Setting Mode Display :

| |
---|---|---
Setting Remind| Configure Home City|

DST Setting

| |
12/24H Setting| Seconds Setting|

Hour Setting

| |
Minutes Setting| Year Setting|

Month Setting

| |
Day Setting| Tone on/off Setting|

Illumination Duration Setting

Button Operation:

Press A Button: Shortly press the button to view home city’s city code. Press the button and hold down for 2 seconds to enter setting mode. Press the button and hold down for 5 seconds to enter hand adjustment mode.
Press B Button: Switch to World time mode
Press C Button: Shortly press the button to cycle the information between: month/day/seconds — hour/minute/seconds. Press and hold down the button to turn on/off the PS function
Press D Button: Shortly press the button to turn on illumination. Press and hold down the button turn on/off the auto backlight (LT displayed when the auto light is on)

Button Operation:

Press A Button: Exit the setting mode
Press B Button: Cycle the setting objective between this order: Home City → DST → 12/24 Hour → Seconds → Minutes → Year → Day → Month → Tone on/off → Illumination duration → Home City
Press C Button: Shortly press the button to increase the setting objective’s data by 1. Press and hold down the button for 2 seconds to increase the data rapidly
Press D Button: Shortly press the button to decrease the setting objective’ s data by 1. Press and hold down the button for 2 seconds to decrease the data rapidly.

D. World Time Mode

General Display

Button Operation:

Press A Button: Shortly press to view the current time’ s city code and full name. Press the button and hold down for 2 seconds to on/off DST .
Press B Button: Shortly press to switch to stopwatch mode
Press C Button: Shortly press to scroll the city code in an easterly direction. Press the button and hold down for 2 seconds to do the operation rapidly
Press D Button: Shortly press to turn on the illumination.

Note:

1. While enter the world time mode, the current selected city’ s city code and full name (English) will show up once on the digital screen, then the current time of the selected city will show up. Press the A button to view the city code.
2. Press the A button and hold down for over 2 seconds, until “NO” start flashing to select the daylight saving time setting; ON: Daylight Saving Time OFF: Standard Time
3. You cannot switch between standard time and DST while UTC is selected as the World Time City.

E. Stopwatch Mode

General Display

Button Operation:

Press A Button:
In Pause state, press the button to reset.
In Running state, press the button to record the elapsed time.
In Reset state, press the button does no effect
Press B Button: Switch to the Countdown timer Mode
Press C Button: On/Off the stopwatch
Press D Button: Turn on the illumination

Note:

1. The stopwatch measures elapsed time in units of 1/100 seconds for the first hour, and in 1-second units after that for up to 24 hours total.
2. When the elapsed time reaches the maximum, the measurement stops.
3. An ongoing elapsed time measurement operation will continue internally even if you change to another mode. However, if you exit the Stopwatch Mode while a split time is displayed, the split time will not be displayed when you return to the Stopwatch Mode.
4. Measurement operation: To perform an elapsed time operation
   C Button (Start) → C Button (Pause) → C Button (Resume) → C Button (Stop) → A Button (Reset)
   To pause at a split time
   C Button (Start) → A Button (Split) (SPL flashing) → A Button (Split release) → C Button (Stop) → A Button (Reset)
   To measure two finishes
   C Button (Start) → A Button (Split) (SPL flashing) → C Button (Stop) (SPL displayed) → A Button (Split release) → A Button (Reset)

F. Countdown Timer Mode

General Display

Setting Remind

Button Operation:
Press A Button: In Pause state, shortly press the button to reset, press the button and hold down for over 2 seconds to enter setting.
Press B Button: Switch to Alarm Mode.
Press C Button: Start/Pause the countdown timer.
Press D Button: Turn on the illumination

Note:
Press A Button: In Pause state, shortly press the button to reset, press the button and hold down for over 2 seconds to enter setting.
Press B Button: Switch to Alarm Mode.
Press C Button: Start/Pause the countdown timer.
Press D Button: Turn on the illumination

Hour Setting        Minutes Setting     Seconds Setting

Button Operation:
Press A Button: Exit the Setting.
Press B Button: Scrolling the setting objective: Hour Minute Seconds.
Press C Button: Shortly press the button to increase the setting data by 1. Press the button and hold down for over 2 seconds to increase the setting data rapidly.
Press D Button: Shortly press the button to decrease the setting data by 1. Press the button and hold down for over 2 seconds to decrease the setting data rapidly.

G. Alarm Mode

General Display

Alarm ON                 Alarm OFF

Button Operation:
Press A Button: Long press 25 to enter the setting state, short press on/off the alarm, C key to switch to “SIC short press on/off the hourly time signal
Press B Button: Shortly press the button to switch to the Timekeeping mode
Press C Button: Scrolling the alarm group in order of: AL1 → AL2 → AL3 → AL4 → AL5 → SIG → AL1
Press D Button: Shortly press the button to turn on the illumination

Note:

1. When a daily alarm is turned on, an alarm tone will sound for about 10 seconds each day when the time in the Timekeeping Mode reaches the preset alarm time. Press any button to stop the sound.
2. When the Hourly Time Signal is turned on, it cause the watch to beep once every hour on the hour. If you do not perform any operation for about two to three minutes in the Alarm Mode, the watch will automatically return to the Timekeeping Mode.

Setting Remind

Hour Setting               Minutes Setting

Button Operation:
Press A Button: Exit the setting
Press B Button: Switch the setting objective. Hour -,Minute
Press C Button: Shortly press the button, the setting data increased by 1. Press the button and hold down for over 2 seconds, the setting data will continuous increase rapidly by 8HZ.
Press D Button: Shortly press the button, the setting data decreased by 1. Press the button and hold down for over 2 seconds, the setting data will continuous decrease rapidly by 8HZ.

H. Hand Adjustment mode

Day of the week Hand Adjusting

Hour Hand and Minute Hand Adjusting

Button Operation:
In the Timekeeping Mode, press A button and hold down for over five seconds until (SUB) starts to flash. Release A button after SUB flashes. This means enter the day of the week hand adjusting mode. If the day of the week hand is not pointed at the SU position, use D button to move it there. Press B button, this causes {0:00} to flash which indicate enter the hour and minute hand adjusting mode. If the hour and minute hands are not at 12 o’clock, use C button and D button to adjust them until they are. Press A button to return to the Timekeeping Mode

I. City in World Time mode

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>