Hybition LG-BYOC300 High Back Office Chair Instruction Manual
- June 15, 2024
- Hybition
Table of Contents
INSTURCTION MANUAL LG-BYOC300
ASSEMBLY GUIDE
Before enjoy the comfort chair, you have to put it together. This Assembly
Guide will take you through the basic assembly process. To make sure your
assembly goes smoothly, please follow the assembly instructions, and
especially the important safety information.
Also, while it is possible to assemble the chair on your own, having a second
person to help you makes it even easier.
Before you begin, please check if there are any missing parts from the
package. Should there be any issues, please don’t hesitate to drop us an email
and we’ll help you out ASAP.
If you run into any difficulty during the assembly, remember to check out the
Assembly Video to see if you’ve missed anything. If you’re unable to resolve
your problems, drop us an email as well and our support team will assist you.
PACKAGE LIST
ASSEMBLY INSTRUCTION
If possible, using drill bit with your electric drill to install our chair
will make assembly more convenient.
STEP 1 : Turn the Star Base upside down, then press the Casters into the holes
at the end of each base leg.
STEP 2 : Turn the Star Base upright and insert the Lift into the center hole of the Star Base, the Lift Cover should be placed over the Lift.
STEP 3 : Align the seat plate to the bottom of the seat cushion, make sure
that the front of the seat plate is facing the front of the seat cushion.
Attach the seat plate to the seat cushion using four M6X20m bolts, tighten all
the bolts with the T-wrench.
STEP 4 : Align two control handles of the seat plate over the pre-drilled holes underneath the seat cushion with four M6x20m Bolts, tighten all the bolts with the T-wrench. the bolts with the T-wrench.
STEP 5: Attach Seat Cushion and Back Cushion, align the Steel Plate over the pre-drilled holes underneath the back cushion with four mm Bolts, tighten all the bolts with the wrench.
STEP 6: Then insert one end of the back cushion steel plate under the bottom plate of the seat with three M8x20 Bolts, tighten all the bolts with the wrench.
STEP 7 : Turn the seat cushion upright and align the center hole of the seat plate over the lift, then push the seat cushion down onto the lift firmly until the connection is secure.
STEP 8 : Attach the arms to the seat cushion with four M8X35mm bolts, using
the Wrench.
Note: Arm rests are labeled with an “L”(left) or “R”(right) to show which
sides they should be placed on.
STEP 9: Press the plastic caps into the adjuster holes to cover the bolts.
Congratulations You’ve assembled your chair.
INSTRUCTIONS FOR USE
-
Seat Height: Paddle-shaped lever on the right side
At the proper height, your feet should rest flat on the floor. -
Tilt Tension: Long stem under the seat cushion with knob
-
Adjustable Back Angle
-
Lifting headrest and dynamic suspension lumbar pillow
SAFETY AND MAINTENANCE
- Do not stand on the chair, Do Not use the chair as stepladder.
- Use this product for seating one person at a time.
- Do not use the chair unless all bolts and screws are firmly secured.
- Avoid contact with sharp objects to prevent puncturing the fabric.
- Every 6 months, check all bolts and screws to ensure they are tight.
- To clean, spot clean only using a damp towel and mild cleaner, first test on a small,, obscure area of fabric.
- Chair weight limit not to exceed 350 lbs.
SAFETY INFORMATION
Documents / Resources
|
Hybition LG-BYOC300 High Back Office
Chair
[pdf] Instruction Manual
LG-BYOC300 High Back Office Chair, LG-BYOC300, High Back Office Chair, Back
Office Chair, Office Chair, Chair
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>