CASIO HK-W Watch User Guide

CASIO HK-W Watch

Product Information

The product is an analog watch with various modules available, including modules 1362, 1398, 1770, 2799, 3378, and 4370. It also includes modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, and 5049. Additionally, it features modules 1782, 4328, and 4747. Other modules include 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, 4393, 5025, and 5044. Module 4746 is also available along with modules 709, 1333, 1347, and 3716.

Setting the Time – Crown

For modules 1362, 1398, 1770, 2799, 3378, and 4370:

1. Pull out the crown to set the time.
2. Rotate the crown to adjust the hands.
3. Push the crown back in to resume timekeeping.

For modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, and 5049:

1. When the second hand is at 12 o’clock, pull out the crown to stop it.
2. Set the time by rotating the crown. Move the minute hand slightly past the desired setting and then back it up to the exact setting.
3. Push the crown back in to resume timekeeping.

For modules 1782, 4328, and 4747:

1. When the second hand is at 12 o’clock, pull out the crown to stop it.
2. Set the time by rotating the crown. Move the minute hand slightly past the desired setting and then back it up to the exact setting.
3. Push the crown back in to resume timekeeping.

For modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, 4393, 5025, and 5044:

1. When the second hand is at 12 o’clock, pull out the crown to the second click to stop it.
2. Set the time by rotating the crown. Move the minute hand slightly past the desired setting and then back it up to the exact setting.
3. Push the crown back in to resume timekeeping.

Setting the Day and Day of the Week – Crown

For modules 4746, 709, 1333, 1347, and 3716:

1. When the second hand is at 12 o’clock, pull out the crown to the second click to stop it.
2. Set the time by rotating the crown. Move the minute hand slightly past the desired setting and then back it up to the exact setting.
3. To set the day, pull out the crown to the first click and rotate it counterclockwise.
4. To set the day of the week, rotate the crown clockwise. Ensure that the correct language (English or Spanish) is selected.
5. Push the crown back in to resume timekeeping.

Using Instructions

Elapsed Time Bezel

• For watches with an elapsed time bezel:
• Rotate the elapsed time bezel to align the mark with the minute hand. After a certain amount of time has elapsed, read the graduation on the bezel where the minute hand points to determine the elapsed time.
• The elapsed time is indicated by the markings on the bezel.
• The bezel includes markings for 1, 10, 20, 30, 40, and 50 minutes.
• Please refer to your specific module number for accurate instructions and features.

Your watch may differ somewhat from the one shown in the illustration

• [Modules 1362, 1398, 1770, 2799, 3378, 4370]

To set the time
Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping.

• Modules 705, 706, 1300, 1311, 1330,
• 1344, 1360, 1399, 1747, 1771, 4394, 5049]

To set the time

1. When the second hand is at 12 o’clock, pull out the crown to stop it.
2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the  setting you want, and then0 back them up to the setting.
3. Push the crown back in on a time signal to resume  timekeeping

• [Modules 707, 708, 1331, 1332, 1342, 1345,
• 1346, 1787, 2717, 2718, 2719, 2725, 2731,
• 2748, 2749, 2783, 2784, 3363, 3711, 3712,
• 4393, 5025, 5044]

To set the time

1. When the second hand is at 12 o’clock, pull out the crown to the second click to stop it.
2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting.
3. Push the crown back in on a time  signal to resume timekeeping

To set the day

• Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do.

1. Pull out the crown to the first click.
2. Set the day by rotating the crown.
3. Push the crown back in to its normal position.

• Modules 709, 1333, 1347, 3716]

To set the time

1. When the second hand is at 12 o’clock, pull out the crown to the second click to stop it.
2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting.
3. Push the crown back in on a time signal to resume timekeeping.

To set the day and day of the week

• Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do.

[Days of the Week]

Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do.

1. Pull out the crown to the first click.
2. Set the day by rotating the crown counterclockwise.
3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected.
4. Push the crown back in to its normal position.

• For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand.
• After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to.
• The elapsed time is indicated.
• Some water resistant models are equipped with a screw lock crown.
• With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns.
• Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>