ErtuSolid NF11 Solid Desk Mount for LCD Installation Guide
- June 15, 2024
- ErtuSolid
Table of Contents
NF11
Installation guide
NF11 Solid Desk Mount for LCD
|
---|---
- Tube cover
- VESA
- Tube
- Bottom support
- Knob
- Anti-slip rubber
- Cable guide
Warning
Make sure the handle here is tightly locket before hang up the
screen
Use more washers if needed
Importer
Fiber Novelty
ul. Boya Żeleńskiego 15
35-105 Rzeszów, Poland
tel. +48 17 787 60 70
www.fibernovelty.pl
Distributors
ERGOSOLID SARL
36 rue du Louvre
75001 Paris, France
Tel. (+33)7 72 155160
www.ergosolid.fr| Ergosolid Italia S.R.L
Via Giosué Carducci
32 — 20123 Milano, Italia
Tel. +39 02 5656 8661
www.ergosolid.it| Ergosolid sp. k.
ul. Boya Zelenskiego 15
35-105 Rzeszow, Poland
tel. +48 17 785 23 71
www.ergosolid.pl
---|---|---
CAUTION
Make sure these instructions are read and completely understood before
attempting installation. lf you are unsure of any part of this installation,
please contact a professional installer for assistance.
WARNING: This product contains small items that could be a choking hazard
if swallowed. Keep these items away from young children.
- The assembly element or mounting / supporting surface must be capable of supporting the combined weight of the product and the device, otherwise the structure must be reinforced.
- Safety gear and proper tools must be used. A minimum of two people are required for this installation.Failure to use safety gear can result in property damage,serious injury or death.
- Never exceed the maximum load capacity of the product, or else it may result in product failure or personal injury.
- Mount using the screws included in the kit. Tighten the screws carefully so that they do not break off the thread!
- This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.
NOTE: Before assembly, please make sure that the kit contains all elements. In the event of missing or damaged parts, please contact your local distributor for replacement parts.
MAINTENANCE: Please check joint parts every two months, making sure the screws are loosened or not.
part of the
ERGOSOLID Group
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>