Shenzhen Lebel Technology Q13 Wireless Earbuds User Manual
- June 4, 2024
- Shenzhen Lebel Technology
Table of Contents
Shenzhen Lebel Technology Q13 Wireless Earbuds
Self use
After leaving the factory, the Bluetooth headset is fully tested after
startup, so the battery is not fully charged. It is recommended that you first
fully charge the Bluetooth headset with a 5v-la charger or an electric sb.
After the first use of the Bluetooth headset, all the power is used up and
then fully charged, so that the service life is longer
Note: donot use fast charging to avoid damage to ear phone battery
Introduction to headset functions
Powers court
When the machine is out of the warehouse, the white light is inside for 3
times, and then the white and green lights flash alternately to enter the
pairing state, and the prompt tone indicates “the machine is started and
pa1redsuccessfu1ty·.
Sootdowr!
After charging and shutting down, the green light is on for a long time, press
and hold the MF key for 5 seconds, and the green light flashes 3times, and the
prompt tone “shutdown”
pair:
After leaving the warehouse, the white light flashes three times, the white
and green lights of the main and auxiliary ears flash alternately, and the
white and green lights of the main ear flash alternately, and the auxiliary
ears turn off the lights and enter the matching state.
Pairing connection:
After leaving the warehouse, the mortar light flashes3 times, the white and
green lights of the main and auxiliary ears flash alternately, and the left
and right ears enter the pairing.After pairing, the white and green lights of
the main ear flash alternately, and the auxiliary ear light is off.
Enterthepairing connection state with the mobile phone. Turn on the Bluetooth
of the mobile phone and click the Bluetooth pairing device name to pair. After
the pairing is successful, the prompt will be prompted
Letgo/stop:
During playing, double-click FB key for a short time because the music
Disconnect:
When connected, turn off the Bluetooth or Bluetooth headset of the mobile
phone, and the prompt tone is “Bluetoothisdisconnected”. ThewhitearKI green
light on them in-ear flashes, and the light on the auxiliary year goes off.
Automatic loopback:
If INhenthe machine is turned on within the connection range, the Bluetooth
device will automatically connect with the paired Bluetooth device, the
“Bluetooth is connected” will source.
Answer the phone:
When calling, press the MFB key to answer the call.
Hangup:
In a call or charging, long the MFB key briefly to hang up the phone.
Call number:
When calling, the headset will automatically report the number: voice prompt,
incoming call “l. ..
Reject calls:
When calling, press and hold the MFB key for about 2
Low power shutdown:
When the battery voltage is lower than the battery voltage, the headset will
turn off automatically
Volume up and down:
Single click the left ear MFB key to reduce the volume, and single click the
right MFB key to increase the volume.
Up and down:
Long press 2s MFB key on the left ear to achieve the previous song, and triple
long press 2s MFB key of the right ear to realize the next song
Headphone compartment charging:
Put the earphone into the bin for charging, and turn off the light after the
earphone is full of green light.
Charging of charging bin
Plug in the SV power supply to charge the bin, and the display screen shows the power.
Voice wake-up function:
Three touch.
notes:
When charging the headset or compartment please use a charger with no more
than SLA output. Do not use fast charging to avoid damage to the earphone
battery. Before charging, please check whether the charger model is
applicable. The headset will discharge automatically when it is in use. It is
recommended to charge the headset once a month. Do not throw the headset into
the fire or water.
Disconnect the phone from the headset
To disconnect the phone from the headset, turn off the headset in any of the following ways: disconnect the headset from the phone using the Bluetooth menu; move the headset away from the phone 10 meters (about 30 feet)
Maintenance and maintenance
Put all accessories out of the reach of children. Rainwater and other liquids
will erode the circuit of the headset. If the headset has been
wet, please dry the headset thoroughly before use. Do not disassemble, modify
or squeeze the headset without permission, otherwise, it may cause the headset
to malfunction or burn.
In accordance with the relevant provisions of the relevant laws and regulations of the people’s Republic of China, the people’s Republic of China on the protection of consumers’ rights and interests and other relevant laws and regulations of the state, we protect the repair and replacement of the sellers and producers of consumer goods. For the relevant goods, earnestly fulfill the responsibility and obligation of repair, replacement and return
- The warranty service is only limited to the nonhuman made damage caused by the quality of the product under normal use.
- Within 30days from the date of purchase, if there is any performance failure, annual artificial damage), the product will be returned and replaced free of charge.
- The product subject will provide a warranty within one year from the date of purchase.
- The company still needs to repair the product beyond the warranty date or beyond the warranty period, We charge for maintenance at our discretion.
Note that when:
you tear up or lose the warranty card, you will lose the chance of
warranty. Our company has the right of final explanation
Product quality warranty card
This warranty card must be provided when receiving service. Please keep h properly!
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>