RALPH LAUREN RL1560 AI Northport Floor Lantern Instruction Manual
- June 13, 2024
- ralph lauren
Table of Contents
RALPH LAUREN RL1560 AI Northport Floor Lantern
Product Information
The Northport Floor Lantern (Item # RL 1560) is a light fixture that provides illumination in a room. It is designed to be installed in accordance with applicable local installation codes and should be handled by a person familiar with its construction and operation. The product comes with CE, SAA, and UK plug adapters.
Product Usage Instructions
- Carefully remove all parts from the box and place them on a clean, soft surface.
- Remove the wire plug (F) from the fixture.
- Insert the quick plug (D) into the base of the fixture (A).
- Install plug (B) to adapter (C) as shown in Diagram 1.
- Plug the lantern into an electrical outlet.
- To test the fixture, switch it on and check if it functions properly.
- The lantern features a dimmer switch (E) that allows you to adjust the brightness. Touch the dimmer to toggle between low, medium, high, and off settings.
Care Instructions
To clean the lantern, use only a soft dry cloth or a feather duster. Avoid using abrasive or chemical agents, as they may damage the product.
Note: If any damage or defect is found during inspection, do not proceed with installation. Retain all packaging material until installation is complete and approved.
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Remove wire plug (F) from fixture, then insert quick plug (D) into the base of fixture (A).
-
Install plug (B) to adapter (C) as shown in diagram 1.
Note: CE, SAA & UK plug adapters included. -
Plug into electrical outlet and test fixture.
Dimmer switch operation: Touch dimmer (E) to adjust between low, medium, high and off settings.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>