TRENDnet TV-IP1514PI Security Network Camera User Guide
- June 13, 2024
- TRENDnet
Table of Contents
TRENDnet TV-IP1514PI Security Network Camera
Product Information
- Model: TV-IP1514PI
- Type: Indoor/Outdoor 5MP H.265 WDR PoE IR Bullet Network Camera
- Night Vision: Yes, with night vision infrared (IR) LEDs that dynamically adjust as needed
- Power over Ethernet (PoE): Yes, offers cost savings and flexibility to install up to 100m (328 ft.) away from the PoE source equipment
- Networking Solution: Yes
- Outdoor Ready: Yes, with an outdoor IP66 weather-rated housing
- Recording Resolution: Up to 5MP HD video at 20fps in the space-saving H.265 compression format Advanced Playback: Yes, with in-camera archived video playback functionality
- Recording Flexibility: Custom schedules using continuous (24/7) and event-based recording modes
- Adjustable Mounting Base: Yes, with a fully adjustable integrated mounting base for installation flexibility
- Motion Detection: Yes, create custom motion detection zones and receive email notifications when triggered
- ONVIF: Yes, ONVIF Profile S compatible
- Storage Options: Record video to a network storage device or a Micro SD card (up to 256GB, not included)
- Wide Dynamic Range (WDR): Yes, improves image quality and focus in high-contrast lighting environments
- Complimentary Software: Includes View Manager software to manage TRENDnet cameras
Product Usage Instructions
- Decide on the installation location for the TV-IP1514PI camera, ensuring it is suitable for indoor or outdoor use.
- Connect the camera to a Power over Ethernet (PoE) source equipment using an Ethernet cable. Ensure the maximum distance between the camera and the PoE source equipment does not exceed 100m (328 ft.).
- Adjust the camera’s mounting base to the desired angle and position.
- If using a Micro SD card for storage, insert a compatible Micro SD card with a capacity of up to 256GB into the camera’s designated slot.
- Configure the camera’s settings using the provided View Manager software or any compatible ONVIF software.
- To enable night vision, ensure that the camera is in a dark environment. The night vision infrared (IR) LEDs will dynamically adjust their intensity based on the distance of objects, providing clear night-time viewing up to 30 meters (98 ft.) away.
- To customize motion detection, create specific motion detection zones using the software and configure email notifications when motion is detected in those zones.
- To record video, define custom schedules for continuous (24/7) or event-based recording modes based on your preferences.
- If using network storage, ensure the camera is connected to the network storage device and set up the appropriate recording settings.
- For advanced playback, access the in-camera archived video playback functionality through the software interface.
Note: Please refer to the complete user manual for detailed instructions and troubleshooting information.
TV-IP1514PI (v1.0R)
- Easy Cloud P2P QR code installation
- 5MP HD video (2592 x 1920) at 20 fps
- Night vision IR LEDs for night vision up to 30m (98 ft.)
- Built-in microphone for one-way audio
- Outdoor IP66 weather rating
- Wide Dynamic Range image balancing
- Save installation costs with Power over Ethernet (PoE)
- Programmable motion detection recording and email alerts
- Micro SD card slot (up to 256GB)
- Free Sentinel iOS® and Android™ mobile apps
- Complimentary View Manager PC software
- NDAA / TAA compliant (U.S. and Canada only)
TRENDnet’s Indoor/Outdoor 5MP H.265 PoE IR Bullet Network Camera, model TV-
IP1514PI, provides day and night surveillance with a night vision range of up
to 30 meters (98 ft.). This bullet network camera delivers year-round
surveillance with IP66 weather-rated housing to withstand outdoor
environments. Record up to 5MP HD video at 20fps in a space-saving H.265
compression format. Easily view live video from the 5MP PoE camera on your
mobile device using our free Sentinel mobile app, or on your PC with our free
View Manager desktop camera video management software.
Night Vision HD Surveillance
Night-time viewing up to 30 meters (98 ft.) away, with night vision infrared
(IR) LEDs that dynamically adjusts as needed.
Power over Ethernet (PoE)
PoE offers cost savings and the flexibility to install this night vision 5MP
PoE camera up to 100m (328 ft.) from the PoE source equipment.
Outdoor Ready
Built for outdoor environments with an IP66 weather rating and an operating
temperature range of -30° – 50°C (-22° – 122°F).
NETWORKING SOLUTION
FEATURES
SPECIFICATIONS
Lens
- Focal length: 3.6mm @ F1.6
- Sensor: 1/ 2.7” CMOS sensor
- DWDR
- 3D DNR
Viewing
- Horizontal angle: 79˚
- Vertical angle : 56˚
- Diagonal angle : 106˚
Minimum Illumination
- IR off: 0.02 lux
- IR on: 0 lux
- IR distance: 30m (98 ft.)
- IR LED wavelength: 850nm
Compression
- H.265
- H.264
- MJPEG
Resolution
- Main stream: H.265/H.264: 2592 x 1920 up to 20fps
- Substream: H.265/H.264/MJPEG: 1280 x 720 up to 10fps
- Third stream: H.265/H.264/MJPEG: 720 x 480 up to 10fps
Hardware Standards
- IEEE 802.1x
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3af
Device Interface
- 10/100Mbps PoE port
- Micro SD card slot
- Power jack
- Built-in microphone
- Reset button
Micro SD slot
- Supports Micro SD/SDHC/SDXC (not included)
- Up to 256GB
Management Interface
- Multi-language support
- Image settings: 3D Noise Reduction, Brightness, Hue Contrast, Saturation, Sharpness, Exposure Value, image Auto Gain, Day/Night switch, WDR, white balance, Mirror, Flip, Color Mode
- WDR enhances video quality in high-contrast daytime lighting
- 3D Noise Reduction removes digital noise from the video signal
- Audio: built-in microphone can be enabled and disabled
- Time and date overlay
- Video Recording: scheduled, motion detection, and tamper detection
- Motion detection: define motion detection areas and motion sensitivity
- Privacy masks: define custom privacy masks
- Tamper detection function: email notification
- Snapshot: real-time snapshot and motion-triggered
- Supports remote management
Housing
- IP66 weather rated
Network Protocol
- IPv4, IPv6, UDP, TCP/IP
- DHCP, NTP, DDNS, SMTP, FTP, LLTD
- SMB
- HTTP, HTTPS
- RTSP, RTP
Compliant Standard
- ONVIF (Profile S)
Dimension
- 150 x 70 x 70mm (6 x 2.75 x 2.75 in.)
Weight
- 389g (0.86 lb.)
Operating Temperature
- -30° – 50° C (-22° – 122° F)
Humidity
- Max. 95% non-condensing
Power
- Input: PoE
- Max. consumption: 5.5W
Power Adapter (optional model: 12VDC1A)
- Input: 100 – 240V AC , 50/60Hz
- Output: 12V DC, 1A external power adapter
View Manager
- Supports TRENDnet cameras
- Recording playback
- Custom viewing modes and options
- Compatibility: Windows®
Sentinel App
- Free iOS® and Android™ apps
- View live camera video
- Push notifications
- Take snapshots and videos
- Playback
Certifications
- CE
- FCC
- UL
Warranty
- 3 year
Package Contents
- TV-IP1514PI
- Weather seal
- Quick installation guide
- Camera mounting hardware
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
- 20675 Manhattan Place
- Torrance
- CA 90501
- USA
- T: 1-888-326-6061
- sales@trendnet.com
- www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertains to TRENDnet products and is subject to change at any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>