niceboy ion charles i6 Robotic Vacuum User Manual

: June 13, 2024
: niceboy ion

Table of Contents

Package contents
Product diagram
Operating instructions
App connection
Device status
Maintenance
Mopping
Parameters
Read User Manual Online (PDF format)
Download This Manual (PDF format)

niceboy ion charles i6 Robotic Vacuum User Manual

Package contents

Robotic vacuum cleaner
Charging base
Side bristles 4x
Power adapter
Instruction manual
HEPA filter
Dual container
Mopping cloth and velcro
Cleaning brush

Product diagram

Operating instructions

First start-up

Removing stickers
Remove the stickers located on the sides of the front bumper.
Operating instructions

Connect the adapter to the charging base
Place the charging stand flat against the wall. Do not place objects on the left and right sides within 1m and in front of the front side within 2m. The base should not be located near objects with a strong reflective surface (mirrors).
Operating instructions

Attach the side brushes

Charging the device
Place Charles in the charging base. Turn on Charles using the power button on the top of the device. The blue „house“ light flashes to indicate that the battery needs to be charged. A steady blue light indicates charging. When charging is complete, the light goes off. When using the device for the first time, charge the device for more than 6 hours.
Operating instructions

App connection

Download the app by scanning the QR code with your mobile phone or search for „Niceboy ION“ in the Google Play/Apple App Store and download the app.
Open the „Niceboy ION“ app and register a new account or use your existing account.
Once you have logged into the app to add a product, click on the „+“ in the top right corner and then „Add Device“.
Then go to the „Robotic Vacuums“ tab and select „Charles i3 Plus“.
Insert the vacuum cleaner into the charging base and switch it on with the power button.
Press the „Home“ button for approximately 6 seconds to connect to the app. A beep will then sound and the WIFI icon will flash rapidly.
In the app, select the Charles i6 vacuum cleaner, select your WIFI and enter your password. Continue to the next page using the „Next“ button. Now wait until the vacuum cleaner connects to the app. If Charles does not connect, try the process again. Make sure your WIFI is transmitting on the 2.4 GHz frequency. If it doesn‘t on the second try, try connecting the vacuum to a different WIFI module. For example, you can use a mobile phone with a hotspot function for this test. If you are still unable to connect the vacuum cleaner in this way, please contact our technical support.
Once the device is successfully connected, you can edit the device name and add it to the room of your choice. Click on „Done“ to access the vacuum cleaner interface..

To connect to the app, your WIFI network must be transmitting at 2.4 GHz.

Device status

On/Off
When Charles is switched off, press and hold the power button, see picture above. The LED light will stop flashing and Charles will enter standby mode.
Device status

Standby mode
When Charles is in standby mode, both LEDs are lit simultaneously. Charles enters standby mode based on various factors.

A. If the device is already connected to the WIFI/application, it will automatically turn off after 5 minutes.
B. If the device has not been connected to the WFI/application, it will automatically shut down after 30 minute

Automatic cleaning
To start the automatic cleaning, press the power button briefly, followed by an audible signal and the automatic cleaning begins. Automatic mode is suitable for complex room cleaning

Spot cleaning
To start spot cleaning, press the power button briefly, followed by an audible signal and the automatic cleaning begins. The spot cleaning mode is suitable for cleaning smaller dirty areas. Place the Charles on the dirty spot and start spot cleaning. Charles will then start to circle the area and after 2-3 minutes of cleaning will return to the charging station

Wall cleaning
To start wall cleaning, you must first connect the vacuum cleaner to the Niceboy ION app.
Then select wall cleaning in the app. Charles will start vacuuming the area along the wall, then returns to the docking station when the cleaning is complete.

Maintenance

Dual container
Open the top cover of the device and remove the dual container.

Empty the dirt and return the dual container into the vacuum cleaner.
The dual container contains two washable filters that should be washed with clean running water approximately every 15-30 days

Side brushes
Turn Charles upside down (with the wheels up), remove the side brushes and clean them. If the side brushes are damaged, replace them with different ones.

Mopping cloth
Turn Charles over, take off the mopping cloth and wash it. After drying, you can return it.

Main brush
To clean the main brush, first remove the plastic cover located on it. Then remove the brush and clean it.

Cliff sensors
Wipe the cliff sensors and charging pins at the bottom of the vacuum cleaner with a soft cloth.

Mopping

First, attach the wiping cloth

Remove the white tape on the back of the velcro .
Make sure there is no dust or water droplets on the bottom of the vacuum cleaner. Then stick velcro to the designated areas at the bottom of the vacuum cleaner.
Attach the mop to the velcro.
Do not soak the mop before attaching, the cloth will soak itself during mopping.

Fill the water container

Remove the dual container from the vacuum cleaner, take off the secondary soft filter and fill the water container with water. Close the container, return the secondary filter to its position and put the container back into the vacuum cleaner.