Firefly GoTo Seat Postural Support Seat User Manual

Firefly GoTo Seat Postural Support Seat

Product Information

The Firefly GoTo Seat is a lightweight portable seat that enhances children’s lives through participation. It’s a safe, supportive multipurpose seat, great for your home or on the go.

The GoTo Seat is intended to provide postural support to children with mild- complex postural needs. It can be attached to various surfaces such as standard chairs, airplane seats, park swings, and can also be used standalone with an attachment to a floor sitter device. However, it is not designed to be used as a substitute for a child’s car seat.

The GoTo Seat is classified as a Class I Medical Device under EU and UK regulations. It conforms to the Medical Device Regulation (2017/745), UK Medical Device Regulations 2002, Medical Device Directive (93/42 EEC), and EN 12182:2012 Assistive products for persons with disability, general requirements and test methods.

Product Usage Instructions

Setting up your GoTo Seat

To set up your GoTo Seat, follow the steps below:

1. Refer to the user manual for detailed instructions and safety information.
2. Make sure the GoTo Seat is clean and free from any damage.
3. Attach the GoTo Seat to a suitable surface such as a hardback chair, supermarket trolley, or floor sitter device.
4. Ensure that the GoTo Seat is securely attached and stable before placing the child in it.

Using the GoTo Seat on a hardback chair

To use the GoTo Seat on a hardback chair:

1. Place the GoTo Seat on the chair.
2. Securely attach the GoTo Seat to the chair using the provided straps or attachments.
3. Ensure that the GoTo Seat is properly adjusted to provide the necessary postural support for the child.
4. Supervise the child while they are seated in the GoTo Seat.

Using the GoTo Seat on a supermarket trolley

To use the GoTo Seat on a supermarket trolley:

1. Place the GoTo Seat in the trolley seat.
2. Securely attach the GoTo Seat to the trolley using the provided straps or attachments.
3. Make sure the child’s weight does not exceed the maximum weight limit of 13kg/28.5lbs.
4. Always keep an eye on the child and ensure their safety while using the GoTo Seat on a trolley.

For more information on product usage, safety precautions, and cleaning instructions, please refer to the complete user manual available on the Firefly website: www.fireflyfriends.com.

The Firefly GoTo Seat is a lightweight portable seat that enhances children’s lives through participation. It’s a safe, supportive multipurporse seat, great for your home or on the go.
Please read all user instructions carefully before using the GoTo Seat. These instructions can also be downloaded from our website www.fireflyfriends.come along with videos, diagrams and other useful downloads.

Intended Use

Intended Use
The GoTo Seat is a portable seating device intended to provide postural support to children with mild-complex postural needs. The device is intended to be attached to a 3rd party surface, including but not limited to; standard chairs, aeroplane seats, park swings. It also can be used stand alone with an attachment to a floor sitter device. The GoTo Seat is not designed to be used as a substitute for a child’s car seat.

Indications for Use
The GoTo Seat has been designed
to provide additional upper body postural support for children with disabilities. The seat must be attached to a chair or similar support structure for stability and safety at all times. The GoTo Seat is for occasional use due to limited support and pressure relief and therefore is not intended to be used as the primary seating system for a child with a disability. The GoTo Seat is available in 2 size options. Size 1 is intended for children aged approximately 1–3 years with a maximum weight of 15kg/33lbs and Size 2 is intended for children aged approximately 3–8 years and a maximum weight of 30kg/60lbs.

We cannot accept responsibility for any use of the product outside of its intended use. Daily activities tested and approved by Firefly by Leckey for the use of the GoTo Seat are:

1. Attached to a hard back chair for dining with family and friends.

2. For use in a shopping trolley allowing the parent/ guardian to shop with greater ease.

3. As a Floorsitter with the
   Floorsitter attachment.

4. For use in a pushchair allowing the parent/guardian to be on the go.

Be aware that while your child is using the Floorsitter it will be possible for them to move around the floor, and so the Floorsitter must always be used under supervision. If in any doubt please contact Firefly customer services on: customer.enquiries@fireflyfriends.com

*Please note however,
the weight limit for a child being placed into a standard shopping trolley seat is 13kg/28.5lbs maximum.

Certification

The GoTo Seat is classified as a Class I Medical Device under EU and UK regulations. As the manufacturer, James Leckey Design Limited, declares that this product conforms to the Medical Device Regulation (2017/745), UK Medical Device Regulations 2002, Medial Device Directive (93/42 EEC) and EN 12182:2012 Assistive products for persons with disability, general requirements and test methods.
Notice to the user and/or patient: Any serious incident that has occurred in relation to the device should be reported to the manufacturer and the competent authority of the Member State in which the user and/or patient is established.

NOTE:
General user advice.

Not following these instructions may result in physical injury, damage to the product or damage to the environment!

Warnings and Cautions

Warning Toppling Hazard:

• Always read user instructions fully before use.

Warning Finger Trap Hazard:

• Ensure that the user or carer does not touch any moving joint or pivot that is not locked.
• While the user is in the product, the carer should strive to keep product adjustments to a minimum.

Warning Occupant Security:

• User transfers in and out of the product must be done with appropriate equipment and personnel.
• Ensure that all harnesses are securely applied.
• If the user exhibits any form of distress, remove from the product as quickly as is safely possible.
• Users should not be left unattended at any time whilst using Leckey equipment.
• Ensure sufficient clearance of any straps from the user’s neck, during use of the product and transfers, to avoid any strangulation risk.

Caution Finger Pinch Hazard:

• While the user is in the product, the carer should strive to keep product adjustments to a minimum.
• Take care when assembling or adjusting the position of the product components that your fingers do not get pinched when positioning components and tightening fixings.
• During product assembly and adjustment, the carer should avoid finger pinching risk of the product’s joints or pivots.
• During transfers and adjustments, the carer should avoid the finger nipping risk of buckles.

Caution Daily Checks:

• The product is to be checked daily before use to ensure that all components are securely attached and safe for use.

Caution Cleaning:

• Clean the product regularly to prevent the build-up of dirt. Accumulated dirt can prematurely wear the fabric components and encourage corrosion on the product. Only use non-abrasive household cleaners and moist cloths, do not use running water on the upholstery whilst it is still attached to the product. See Cleaning and Care Information of the user manual.

Caution Cleaning Power Washer/Hoses:

• Hoses and power washers are not to be used to clean the product. See Cleaning and Care Information of the user manual.

Caution Disposal:

• When disposing of the product using a community waste disposal site, the components should be disposed of separately where appropriate.

Caution Bringing to Use:

• Before use, allow 2 hours for the product to acclimatise to room temperature.

Terms of Warranty

The warranty for GoTo Seat applies only when the product is used according to its intended use, following all manufacturer’s specifications.
A one year warranty is provided
with this James Leckey Design Ltd. manufactured product.
Goods can be returned to us for warranty, repair or replacement up to 12 months from receipt. Once you contact us, we will arrange collection of the goods at our expense and, once returned to us we will repair or replace goods and return them to you within 14 days. In all cases, it is the customers’ responsibility to ensure the goods being returned are suitably packaged, preferably in the original packaging.

Safety Information

1. Always read user instructions fully before use.
2. Users should not be left unattended at any time in this product.
3. Always assess chair/trolley/pushchair for suitability and stability before attaching GoTo Seat.
4. Always ensure the GoTo Seat is firmly secured before use and the straps are tight.
5. The GoTo Seat has not been crash tested and therefore cannot be used in transport. Some airlines have however approved GoTo Seat for use. Check before you fly.
6. Never use the GoTo Seat in a shopping trolley on a sloping surface greater than 10°, to avoid any risk of falling over.
7. Attach Floorsitter first and adjust to preferred angle before placing child in GoTo Seat.
8. Floorsitter should only be used on a firm, solid flat surface.
9. The GoTo Seat contains parts which could present a choking or tightening hazard to small children. Check all components are securely in place and securely fastened before use – including knobs and straps.
10. Do not modify the GoTo Seat. Failure to follow the instructions may put the child at risk. You may also invalidate the GoTo Seat warranty.
11. The GoTo Seat should be stored carefully and should not be used if any parts are faulty. The GoTo Seat should be stored flat to prevent damage.
12. The GoTo Seat should be kept away from all direct sources of heat including naked flames, cigarettes, electric and gas heaters.
13. If in any doubt about the safe use of the GoTo Seat or if any parts should fail, please cease using the product and contact Firefly by Leckey Customer Services on customer.enquiries@fireflyfriends.com.

Medical Device Combinations

It may be possible to combine the GoTo Seat with one or more other Medical Device or other product. Information on which combinations are possible can be found at leckey.com. All combinations listed have been validated to meet the General Safety and Performance Requirements, section 14.1 of the Medical Device Regulation 2017/745.
Guidance on the combination, such as mounting, can be found at leckey.com

Precautions and Contraindictions

Precautions:

• Fixed spinal deformities such as scoliosis or kyphosis
• Severe muscle contractures
• Severe muscular or skeletal asymmetry including hip dislocation
• Progressive and muscle wasting conditions
• High risk or recent history of bone fractures
• High risk of pressure related injury or open sores
• Strong, uncontrolled movement patterns
• Poorly controlled seizure activity
• Children dependent on the use of percutaneous endoscopic gastrostomy
• Medical instability including compromised respiratory or cardiovascular function
• Dependant on 3rd party life-sustaining apparatus such as oxygen tanks
• Significant learning disabilities and/or behavioural issues

Contraindictions:
There are no contraindications associated with the use of the GoTo Seat.
All precautions and contraindications are taken at the discretion of the prescribing clinician or parent. Leckey and Firefly recommends a trained and experienced clinician to be present during all initial assessment, set ups, configurations and reissues in order to minimise risk.

Cleaning and Care Information

Plastic Seat Base

1. When cleaning the plastic seat base we recommend that you use only warm water and a non-abrasive detergent such as washing up liquid.
2. Disinfectant alcohols such as ethanol and isopropanol are suitable for use on the plastic body.
3. Never use organic solvents or dry cleaning fluids.

Upholstery and Fabrics

1. Clean and care for your fabric on a regular basis. Simply vacuum with an upholstery attachment to remove dust particles and wipe with a damp cloth for general cleaning.

2. Microfibre cloths are extremely effective without soap which is helpful, as soap can clog your fabric.

3. The seat covers can be removed from the hard plastic seat base and machine washed at 40°C.

4. Drying procedure is to dry flat.
   Do not tumble dry.

5. Upholstery can be placed into the washing machine intact, after removing straps, buckles and fastenings. Store these in a safe place and out of reach of children.

6. Fabric can also be cleaned by hand whilst in place. For solid food spills, scoop up with a spatula. Clean the fabric with a water-based product such as foam from a mild detergent and remove with absorbent cloth, towels or sponge.

7. To successfully clean upholstery without over-wetting the fabric or causing colours to bleed, products and tools specifically designed to care for upholstery must be used.

8. Clean spills right away. The longer a spot or spill goes untreated, the more difficult it is to remove. It can also lead to permanent colour loss.

9. Routine soap and warm water sponging is effective for ordinary soiling and minor spills. Avoid rubbing as it can be abrasive and damage the fabric. Be careful not to saturate the fabric as this will cause the stain to spread. Work your way from the outside in to avoid spreading the stain more.

10. Antiseptic cleaning agents can be used on more stubborn stains. Disinfectant cleaning liquids such as Isopropyl Alcohol or ethanol are suitable for use on GoTo Seat. Ensure that cleaning products are fully removed.Please allow the product to air dry, ensuring all alcohol is evaporated before use.

11. Do not put the upholstery on to the plastic base whilst the cover is still wet. Dry thoroughly prior to reassembly.

12. Do not iron the cover or straps.

13. Do not bleach any part of the GoTo Seat.

Tip:
One of the best water-based upholstery cleaners is very easy to make at home. Put one cup of warm (not hot) water into a mixing bowl and then add 1/4 cup of biodegradable dish washing soap. Beat with an electric mixer at medium speed until the liquid becomes a thick foam. This foam will remove built up dirt and most food or drink stains.
Not only is this cleaner, simple to make and inexpensive, it is also nontoxic and environmentally-friendly.

Floorsitter base unit

1. Ensure the bottom of the floorsitter base unit is cleaned after every use.
2. Soap and water can be used for daily cleaning.
3. Do not use solvent to clean the floorsitter base unit.
4. To remove sand/soil/grass or any small particles that may be in the floorsitter-to-seat connections, slight tapping of the area will encourage the particles fall out. Rinse thoroughly to ensure there is no build up of particles inside the connections. For stubborn blockages on the floorsitter, the latch can be given a thumb push to remove any particles and aid release.
5. Should your floorsitter come into contact with salt water, rinse all parts thoroughly with fresh, salt water.

If your floorsitter is being used in environments outside the home, (such as the beach or garden) it is important to rinse it after every use so that it is free from any particles/obstructions that could affect its working mechanisms.

Product Servicing

For all service related issues please refer to the firefly website www.fireflyfriends.com or contact the Firefly Customer Service team on customer.enquiries@fireflyfriends.com

Important guidelines

Placing of child into GoTo Seat

1. The GoTo Seat must be securely fastened in place for its intended use before placing a child into the seat.
2. Floorsitter should only be used on a firm, solid flat surface. Soft surfaces such as carpet and rugs (especially deep pile) can reduce the stability of the Floorsitter and should be used with caution.
3. Ensure the harness straps do not obstruct placement of child into the GoTo Seat. Shoulder straps and side lateral support straps should be very slack.
4. If placed in a trolley: guide the child’s legs slowly / gently through leg gaps in shopping trolley; do not force legs through.
5. Once legs are safely through, gently fit child’s arms through shoulder straps – the shoulder straps should be very slack. Ensure shoulder strap pads are on child’s shoulders.
6. Close centre buckle and adjust side lateral support straps to ensure child is secure in seat harness. The shoulder strap length should be adjusted to fit your child securely. See Section 14(b) for guidance.
7. The groin strap length can be adjusted by accessing the adjustment fitting underneath the padded cover. In the GoTo Seat Size 2 the location of the groin strap can be moved outwards to provide more room for your child as they grow. See Section 14(b) for guidance.

Removal of child from GoTo Seat

1. Slacken shoulder straps and side lateral support straps.
2. Unlock central buckle using release button on harness.
3. Slide shoulder straps off child’s shoulders and gently remove child’s arms from harness.
4. For Size 1 only, if placed in a trolley: lift child up gently guiding their legs out from the leg gaps in the trolley.

Do not attempt to lift child out of the trolley while they are still attached to the seat.

Product Inspection

We recommend that various checks of the equipment are carried out before each use to ensure the product is safe.
The recommended checks are detailed below.

1. Check harness is in place and secure.

2. Check all upholstery for signs of wear and tear.

3. Check all buckles to ensure straps are secured firmly to the plastic body.

4. Check plastic support for cracks or damage.

5. Ensure all knobs are tightened securely.

6. Ensure GoTo Seat is secure on base before positioning child in GoTo Seat.

7. If you are using the floorsitter, please ensure it is securely attached to the GoTo Seat.
   See Section 13 for guidelines.

8. If you are using the floorsitter, check latches and connections are clear of dirt and debris with no signs of wear and tear.

If in any doubt about the continued safe use of your Firefly product or if any parts should fail, please cease using the product and contact our customer services department as soon as possible.

Reissuing Firefly Products

Before re-issuing a product, it is recommended that it is disinfected using one of the following procedures:
Note: Always clean the product first to remove accumulated soiling prior to disinfecting/sanitising.

1. Where possible, we recommend the use of an automated “fogger” disinfection system that is used to completely cover the product surfaces with a disinfectant agent. The manufacturer’s instructions for the chosen system should
   be referred to prior to use and followed exactly.

2. Where an automated disinfection system is not available, all product surfaces should be wiped over with disinfectant surface wipes or liquid disinfectant on a soft cloth. Suitable products are 70% IPA, 70% Alcohol or diluted bleach. The manufacturer’s instructions for the chosen product should be followed. Product upholstery and fabrics should be cleaned thoroughly in accordance with section, Cleaning and Care Information, of this manual.

Ensure a copy of the user manual is supplied with the product. If in any doubt about the continued safe use of your Firefly by Leckey product or if any parts should fail, please cease using the product and contact our customer service department as soon as possible on: customer.enquiries@fireflyfriends.com.

Setting up your GoTo Seat

13(a) Aligning the lateral support

1. Your GoTo Seat will arrive like this, with the lateral support aligned to the body.
2. Loosen the knob just enough so that you can rotate the lateral support.
3. Rotate the lateral support anticlockwise and into position.
4. Check that the lateral support is home in the central section of the backrest, and tighten the knob.
5. Turn your GoTo Seat over and clip the lateral support straps into the central buckle. See Section 14(b) for guidance.
   Check that when the lateral support straps are clipped together, all straps are arranged correctly as shown.

13(b) Setting up the Floorsitter (if purchased with GoTo Seat)

The floorsitter should always be placed on a firm, solid, static surface. When placing the floorsitter on your chosen surface, it’s vital that all rubber feet are in contact with the surface. Once the floorsitter is in place, ensure the recline arm is set to its highest position.

Using the GoTo Seat on a chair

14(a) Attaching GoTo Seat to a chair

1. Make sure all straps are loose and not fastened to each other. Place GoTo Seat on to the chair.
2. Fasten straps A together securely around the back of the chair. Repeat for straps B . Fasten straps C underneath the chair.
   Pull straps outwards to tighten.
   Tidy excess straps into loops and secure into clips. Ensure all black straps are securely fastened to the hard back seat and the five-point buckle at the front is unfastened before placing the child in the GoTo Seat.
   When used on an aircraft seat only straps A and B should be securely attached to the back of the aircraft chair. Strap C should not be attached on an aircraft seat. Instead, the child must use the aircraft lap belt as usual, which will prevent the seat from moving upwards.

14(b) Opening and closing the 5 point buckle

Before beginning, ensure shoulder, lateral support and groin straps are all loose and unfastened.

1. Attach the two lateral support fastenings to the sides of the mid-point buckle.
2. Once fastened, adjust the shoulder straps, lateral support straps and groin strap by pulling the straps to tighten.
3. In Size 2 GoTo Seat the groin strap mounting location can be moved backwards or forwards to suit your child’s needs. Ensure it is firmly fitted to the plastic GoTo Seat base. WARNING Make sure the straps are not twisted when the buckle is closed.

14(c) Adjusting the headrest and lateral support

1. Unscrew the knob at the headrest anti-clockwise to remove the headrest from the GoTo Seat base. Move the headrest up or down to achieve your desired position.
2. Once you have the headrest at your desired height, screw the knob back in to the GoTo Seat base by turning clockwise.
3. Detach the lateral support by turning the knob anti-clockwise. Move the lateral support up or down to achieve your desired position. Once you have the lateral at your desired height, secure the lateral again by turning the knob clockwise.

Using the GoTo Seat on a supermarket trolley

1. Ensure all straps are loose and unfastened. Place GoTo Seat in to trolley seat. Thread straps A through the grid of the trolley seat and fasten. Pull straps to tighten straps.
2. Thread straps B through the loop of the trolley seat, connect and tighten where required.If there is no loop at top of trolley seat, attach straps B to the same frame as straps A.
3. Fasten straps C underneath the trolley seat and pull to tighten. Loop the straps and tidy in to clips.
4. Ensure the trolley seat is secure with the five point buckle at the front open and straps loose before placing the child into the trolley seat.

Attaching the GoTo Seat to the floorsitter accessory

Before attaching the GoTo Seat to the floorsitter accessory, follow steps in section 13(b).

1. Lower GoTo Seat with the seat base flat onto the floorsitter.
2. Making sure the seat base is centrally aligned with the floorsitter move the seat base forward so the seat base slides into the locking channel.
3. When the seat base locks into the floorsitter you will hear a click which will mean the lock has been engaged.

Attaching the GoTo Seat to the floorsitter accessory (continued)

Before attaching the recline arm to the backrest, ensure that it is at the highest setting.
With one hand on GoTo Seat, use the other hand to push the button highlighted and slot the attachment into the backrest.
Once attached correctly,
you will hear a click.

Listen for audible click when engaging both seat base and seat back to the floorsitter.

Recommended Recline Positions

Upright position – if your child has good sitting tolerance and trunk control, they may be able to use an upright sitting position. Mid recline position – we recommend that GoTo Seat is placed into a mid recline position if your child is being lifted into the seat. Full recline position – we recommend that GoTo Seat is placed into the full recline position for children with minimal head control.

Using the GoTo Seat floorsitter recline function

Once your child is fully secure and supported, the GoTo Seat/ floorsitter recline function can be used.

Exercise caution when altering the recline angle. You should aim to make this movement as smooth as possible to reduce any anxiety the child may have.

To bring GoTo Seat in to a more upright position, place one hand onto the GoTo Seat at the top of the backrest for support, and the other hand onto the green clip on the recline arm of the floorsitter.

Release the clip and bring the seat into an upright position that is suitable for your child.
Fasten the clip on the floorsitter.
You will hear a click once fully engaged.

17(b) Removing GoTo Seat from floorsitter

To release GoTo Seat from the floorsitter, press the green button on the recline arm and pull the back rest forward.

To release the seat base, pull on the green plastic tab and slide backwards, then lift GoTo Seat off the floorsitter.

Taking GoTo Seat apart and removing upholstery

18(a) Headrest

1. Unscrew the knob at the headrest anti-clockwise to remove the headrest from the GoTo Seat base.
2. Screw the knob into the back of the headrest to ensure safe keeping.
3. Unbutton the upholstery from the headrest on both sides.
4. Slide headrest plastic inner down from the upholstery cover.
5. Detach the headrest from the GoTo Seat base completely by removing the shoulder strap buckles from the headrest.

18(b) Lateral Support

Start with all the straps connected to the buckle as shown.

1. Turn the GoTo Seat over and detach the lateral support by turning the knob anti-clockwise.
2. Slide the lateral support up and over the GoTo Seat backrest. Screw the knob back to the slider component to prevent mis-placing.
3. Turn the GoTo Seat over again and rest the lateral support on top of the GoTo Seat.
4. Loosen the lateral support side straps as much as possible but keep the buckle connected.
5. Pull one side of the plastic insert out of the cover.
   Remove the strap by feeding the plastic buckle through the holes and then through the upholstery.
   Repeat with the other side of the lateral support. Once removed from the plastic lateral support, your upholstery is ready for washing.

18(c) Straps

1. Lay the GoTo Seat base face-down and unbutton the upholstery.
   Remove straps from the GoTo Seat pad by threading the buckles through the holes of the upholstery and plastic base. CAUTION
   Connect the straps together in their pairs and set aside in a safe place.
   Remember that straps A are longer and should be attached back into seat pad only. Straps A have a different warning label which can be used to identify them if necessary.

2. As with the above straps, thread the buckle of the groin strap through its corresponding hole in the GoTo Seat base at the bottom of the seat pad, followed by the upholstery.
   18(d) Upholstery

3. Remove the insert from the upholstery. For the GoTo Seat Size 1, undo the Velcro at the seat base to remove the insert.

Putting the upholstery back on and assembling GoTo Seat

19(a) Straps & Upholstery

1. Retrieve the straps for the GoTo Seat insert, with straps B and C at the rear of the GoTo Seat base and straps A (the longest straps) at the seat pad.
2. Thread the buckle of each black strap (not the fastening) through the holes in the upholstery first, followed by the hole in the insert.
3. As with the above straps, thread the buckle of the groin strap through its corresponding hole in the upholstery at the bottom of the seat pad, followed by the plastic base.
4. Once all of the straps are inserted, place the insert into its upholstery.Slide the widest part of the GoTo Seat base into the upholstery first. For Size 1, open the Velcro of the seat base before this.

19(b) Lateral Support
Before starting, plan which lateral support strap needs to be attached to which side of the upholstery in order for the buckle to fasten.

1. Loosen the lateral support straps on the central buckle as much as possible. Align the upholstered cover, plastic lateral support insert and straps as shown.
2. Insert the lateral support strap into the lateral support upholstery.
3. Pull the strap through the upholstery.Thread buckle through inner hole of upholstery for smaller children.
4. Thread strap through the lateral support insert (this leaves the buckle on the outside of the lateral support to prevent any irritation during use). You can use a different thread pattern to change the width of the lateral to suit your child.
5. Place the plastic lateral support insert into the upholstery and pull on the strap to pull the lateral support insert into the upholstery.

19(c) Headrest

1. Insert shoulder strap buckle straight through the front of the headrest insert and secure at the back.
2. Slide headrest insert into its upholstery and fasten poppers.
3. Attach headrest to GoTo Seat base by aligning screw hole with its gap. Fix to place by screwing the knob clockwise.

Attaching the Pressure Relief Cushion

1. Ensure that your GoTo Seat is safely attached to a suitable chair or the Floorsitter accessory.
2. Position your cushion on the seat base of the GoTo Seat and attach it using the Velcro straps.
3. Ensure that the height of the headrest and laterals are appropriately adjusted when the cushion is placed on to the GoTo Seat, as the cushion will raise the height of your child slightly. The GoT Seat Cushion is designed to provide your child with pressure relieving comfort as well as additional postural support and pelvic stability. Here are a few ways in which it can be used.

Pelvic Stability

1. Ensure the roll is attached securely to the cushion. Use the cushion and roll to enhance pelvic stability and comfort by positioning the roll underneath the cushion, as pictured.

Long Sitting in Floorsitter

1. Remove the roll from the cushion and fold the Velcro back on itself so that it sticks to the roll.
2. Place the roll under your child’s knees whilst they are long sitting. This may facilitate a more comfortable position for your child by creating a natural bend in the knee. Particularly useful if your child experiences fluctuating muscle tone.
3. If the seat base is long enough the roll may be used to support your child’s feet by placing the roll under their ankles.

On a Dining Room Chair

1. The roll can be used with or without the cushion on a GoTo seat when attached to a dining room chair.
2. If appropriate for your child, place the roll under their knees to enhance comfort. This may also reduce any rubbing and skin friction against the surface of the chair.

Foam

1. Express machine wash for 15 minutes at 40°C
2. Drying procedure is to dry flat. Do not tumble dry
3. Once the foam is completely dry, take time to carefully fit and position it back in to the covers. Push the foam right in to the corners of the covers so it fills it out.

Cleaning and Care Information

Cushion and roll covers

1. Wipe with a damp cloth for general cleaning. Microfibre cloths are extremely effective without soap which is helpful, as soap can clog your fabric
2. The cushion covers can be removed from the foam, placed in to the washing machine intact and machine washed at 40°C
3. Drying procedure is to dry flat. Do not tumble dry
4. Fabric can also be cleaned by hand whilst in place. For solid food spills, scoop up with a spatula. Clean the fabric with a water-based product such as foam from a mild detergent and remove with absorbent cloth, towels or sponge
5. Clean spills right away. The longer a spot or spill goes untreated, the more difficult it is to remove
6. Routine soap and warm water sponging is effective for ordinary\ soiling and minor spills. Avoid rubbing as it can be abrasive and damage the fabric. Be careful not to saturate the fabric as this\ will cause the stain to spread. Work your way from the outside\ in to avoid spreading the stain more
7. Antiseptic cleaning agents can be used on more stubborn stains. Disinfectant cleaning liquids such as Isopropyl Alcohol or ethanol are suitable for use. Ensure that cleaning products are fully removed. Allow the product to air dry, ensuring all alcohol is evaporated before use
8. Do not put foam in to upholstery whilst either the foam or upholstery is still wet. Dry both thoroughly prior to reassembly
9. Do not iron any part of the upholstery or foam
10. Do not bleach any part of the upholstery or foam.

Tip
One of the best water-based upholstery cleaners is very easy to make at home. Put one cup of warm (not hot) water into a mixing bowl and then add 1/4 cup of biodegradable dish washing soap. Beat with an electric mixer at medium speed until the liquid becomes a thick foam. This foam will remove built up dirt and most food or drink stains. Not only is this cleaner, simple to make and inexpensive, it is also nontoxic and environmentally-friendly.

Sizing Information

Max Weight
(kg/lbs)| 15/33| 30/66

Age Range
(approx)

| ****

1-3 years

| ****

3-8 years

*(if child is above 13kg/28.5lbs GoTo Seat cannot be used in a shopping trolley)

TABLE OF SYMBOLS

GoTo Seat Vinyi

Cleaning and Care Information

• Wipe clean routinely with a microfibre cloth, lightly dampened with cold water only. Then dry with a clean absorbent cloth.

• Soak up spillages as soon as possible with an absorbent dry cloth to prevent staining. Clean with a microfibre cloth, lightly dampened with cold water.

• Note dyes and pigments from indigo jeans, ball point and felt tip pens may permanently stain.

• If soiling has accumulated use a mild soap (non-alkaline). Take care to remove all soap residues. Then dry with an absorbent cloth.

• Remove body fluids and extreme soiling immediately (within 15 minutes) with cold water. Apply your approved infection control protocol, a 10,000ppm sodium chloride bleach solution, Haz-Tabs or Chlor-Clean. Remove product residues and then dry with a clean absorbent cloth.
  Note steam cleaning disinfects but the application of heat may fix staining substances and may result in permanent marks.

• If soiling has accumulated use a mild soap (non-alkaline). Take care to remove all soap residues. Then dry with an absorbent cloth.

• Remove body fluids and extreme soiling immediately (within 15 minutes) with cold water. Apply your approved infection control protocol, a 10,000ppm sodium chloride bleach solution, Haz-Tabs or Chlor-Clean. Remove product residues and then dry with a clean absorbent cloth.

• Note steam cleaning disinfects but the application of heat may fix staining substances and may result in permanent marks

• Do not clean, tumble dry or fully immerse the fabric in water.

Fireflyfriends Ltd 19c Ballinderry Road Lisburn BT28 2SA Northern Ireland
T: (+44) 28 9267 8879
E: hello@fireflyfriends.com

USA Distributor / Canadian Distributor

Fireflyfriends Ltd
19c Ballinderry Road Lisburn BT28 2SA Northern Ireland
fireflyfriends.com
Date of Preparation : May2021
T: 0044(0)28 9267 8879
E: hello@fireflyfriends.com

References

• Firefly | Additional Needs Adaptive Equipment
• Leckey | Home | Products for Children with Additiona...
• Firefly | Additional Needs Adaptive Equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>