JEUJUG JEU-BT2015 Radio Portable AM FM Radio Vintage Retro Bluetooth5.1 Speaker Instruction Manual

JEUJUG JEU-BT2015 Radio Portable AM FM Radio Vintage Retro Bluetooth5.1 Speaker Instruction Manual

SAFETY ATTENTION

• Please read this instruction manual carefully before using this product.
• Please pay attention to the warnings and precautions on this product, and the safety rules must be strictly followed.
• Please keep this instruction manual for future reference.

1. In order to avoid fire or electric shock, do not expose the machine to rain or moisture.
2. Before using AC power to power the machine, please check whether the grid voltage is the same as the voltage specified in this manual.
3. Pay attention to the (+/-) polarity direction of the dry battery, and insert the battery correctly according to the instructions.
4. When the product is not used for a long time, it is recommended to remove the dry battery to avoid damage to the product due to battery leakage.

NAME OF EACH PART

1. Signage
2. Horn
3. Holster handle
4. Battery indicator
5. Tuning indicator
6. Bluetooth indicator
7. Function switch
8. Table ruler
9. Tuning Torque
10. Volume/Power switch
11. External audio jack
12. Headphone jack
13. Telescopic antenna
14. Battery Door
15. AC Jack

RADIO FUNCTION

Turn the “OFF POWER” button to the right (in the direction of MAX VOLUME), hear a sound of the card, and then adjust the volume to an appropriate level That’s it.

1. FM position:
   Adjust the band button to the FM position, then twist the “TUNING” button, you can listen to any radio program from 87.5-108MHZ.

2. AM position:
   Adjust the band button to the AM position, then twist the “TUNING” button, you can listen to any radio program from 520-1710KHz.

3. The “TUNE” indicator lights up when a valid radio station is received
   
   Notice:
   1. When listening to “FM” radio, please pull out the telescopic antenna for better reception.
   2. “AM” When the received radio signal is not good, please adjust the direction of the machine to get
   better reception results.

4. BT status:
   a. Turn the function switch to the BT position, the BT indicator light flashes quickly, use the mobile phone to search for the pairing name: JEU-BT2015. After pairing, a beep will sound after the code is paired.
   b. After connecting to BT, the BT indicator light is always on, and you can play music through BT devices such as mobile phones.
   C. When music is playing, the BT indicator flashes slowly

HOW TO USE AUX

a. Twist the “OFF POWER” button to the right (in the direction of MAX VOLUME), hear a sound of the card, and then adjust the volume to an appropriate level.
b. Plug the AUX cable into the AUX IN jack. After the connection is successful, adjust the volume to play the external audio source.

HOW TO USE THE HEADSET

When listening with headphones, please insert the headphone cable plug into the headphone jack, and the speaker will be automatically disconnected and muted.

CHARGING METHOD

Plug the power cord into the AC socket at the back of the main unit, and insert the power plug into the socket to charge the unit.

1. During the charging process, the power indicator will light up, there are 4 red indicators in total, when the first light is on, the power is 0-25%,
2. When the 1.2 light is on, the power is 25-50%, when the 1.2.3 light is on, the power is 50-75%,
3. When the 1.2.3.4 light is on, the power is 75-100%.

Note : When working with a lithium battery, the power light will also light up to indicate the remaining state of the lithium battery.

HOW TO USE THE POWER CORD

This machine can be used by plugging in the power cord or installing dry batteries

1. Insert the power cord into the AC socket on the back of the main unit, and insert the power plug into the socket.
2. Please remove the dry battery when using the power cord.
3. If there is a dry battery in the main unit, connect the power plug to the socket, and it will switch to household power. When using dry batteries, please turn the power The plug is removed from the socket.

REPLACE DRY BATTERIES

When the sound becomes smaller or distorted during playback, the battery should be charged or replaced in time.

1. Push and pull the battery door latch, open the battery door, insert 2 (UM-1) batteries according to the direction shown in the battery room, and cover Good battery door.
2. When installing the battery cover, please align the hole first, and then press down until you hear a click.

SIMPLE TROUBLESHOOTING GUIDE

1. When you are not using it, please turn off the power of this unit.

2. When there is noise or staccato, the reasons are as follows:
   a. The voltage may be too low, you need to plug in AC to charge.
   b. External signal interference, stop working.

3. The reasons for no sound are as follows:
   a. The power is not turned on or the switch is not turned on.
   b. Possibly a headset is plugged in.

4. If the machine is not used for a long time, the dry battery should be taken out to prevent the leakage of battery fluid from damaging the machine.

MAIN PERFORMANCE INDEX

Power supply: AC 120V/60HZ
Lithium battery 3.7V/1200MAh
Dry battery DC 3V 1.5V x 2

Output impedance : Speaker 4Ω 5W

Output power : 1.5W

Frequency range : FM 87.5-108MHz
AM 520-1710KHz

BT Ｎame : JEU-BT2015
Weight : 0.93Kg
Size : 22378140mm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>