CASIO 5605 Smart Watch User Guide
- June 13, 2024
- Casio
Table of Contents
CASIO 5605 Smart Watch User Guide
https://world.casio.com/manual/wat/
Configuring Home City, Time and Date Settings
- Configure Home City and summer time settings first. After that, configure time and date settings.
- In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen.
- Press C to move the flashing in the sequence shown below to select the other settings.
- Use B and D to change the selected setting.
- Press A twice to exit the setting screen.
Mode Selection and Operations
- Press C to cycle between modes.
Timekeeping Mode
-
A (at least 1 second): Time, date setting screen
A: Home Site Data Setting Screen
C: Cycles between UTC differential, longitude, east longitude/west longitude, lunitidal interval hours, lunitidal interval minutes.
D,B: Change selected setting. -
A: Exits setting screen.
Moon/Tide Data Mode
-
A (at least 1 second): Date setting screen
C: Selects year, month, or day.
D,B: Change selected setting. -
A: Exits setting screen.
Stopwatch Mode
Countdown Timer Mode
-
A (at least 1 second while start time displayed): Start time setting screen
C: Selects hours, minutes, auto repeat (on/off).
D,B: Change selected setting.
D: Auto-repeat on/off -
A: Exits setting screen.
Alarm Mode
-
A (at least 1 second): Alarm time setting screen
C: Selects hour, minute, month, day.
D,B: Change selected setting. -
A: Exits setting screen.
Dual Time Mode
-
A (at least 1 second): Dual Time setting screen
C: Selects DST, hour, minute.
D: DST setting
D,B: Change selected setting. -
A: Exits setting screen.
Hand Setting Mode
-
A (at least 1 second): Analog hand setting screen
D: Advances minute hand 20 seconds.
B (holding down D): Locks high-speed hand movement. -
A: Exits setting screen.
Light
- B: Illuminates face.
Specifications
Accuracy at normal temperature: ±30 seconds a month
Digital Timekeeping: Hour, minutes, seconds, a.m./p.m. (P), month, day,
day of the week
Time format: 12-hour and 24-hour Calendar system: Full Auto-calendar pre-
programmed from the year 2000 to 2099 Other: Daylight Saving Time (summer
time)/Standard Time; Home Site data settings (UTC differential, longitude,
lunitidal interval) Analog Timekeeping: Hour, minutes (hand moves every 20
seconds) Moon/Tide Data: Tide level for a specified date and time; Moon phase
indicator and Moon age for a specified date Stopwatch:
Measuring unit: 1/100 second Measuring capacity: 23:59’59.99″ Measuring modes:
Elapsed time, split time, two finishes
Countdown Timer: Measuring unit: 1 second Input range: 1 minute to 24
hours (1-minute increments and 1-hour increments) Time up alert duration: 10
seconds Other: Auto-repeat timing
Alarms: 3 Multi-function alarms (1 with snooze feature); Hourly Time
Signal Alarm type: Daily alarm, Date alarm, 1-month alarm, Monthly alarm
Alert duration: 10 seconds
Dual Time: Hour, minutes, seconds, a.m./p.m. (P) Other: Daylight Saving
Time (summer time)/Standard Time
Illumination: LED (light-emitting diode); Auto Light Switch; selectable
illumination duration (approximately 1.5 seconds or 3 seconds)
Other: Button operation tone on/off
Battery: One lithium battery (Type: CR1220) Approximately 3 years on type
CR1220 (assuming alarm operation 10 sec./day and one illumination operation
1.5 sec./day)
Frequent use of illumination runs down the battery.
Specifications are subject to change without notice.
Site/Lunitidal Interval Data List
- The contents of the above table are current as of July 2018.
- The rules governing global times (UTC offset and GMT differential) and summer time are determined by each individual country.