Arlux K-LINE Series 2 LED Interconnectable Instruction Manual
- June 13, 2024
- Arlux
Table of Contents
Arlux K-LINE Series 2 LED Interconnectable Instruction Manual
Instructions for use
Integrated LED circuit
3min
120° – Max.6m
– 10 lux
|
| CRI| | |
---|---|---|---|---|---
3297028505915| 36W| > 80| IP 65| 230V| 119,2×6,5×6,5 cm
3297028505922| 40W| > 80| IP 65| 230V| 120×7,8×4,9 cm
3297028505939| 60W| > 80| IP 65| 230V| 149,2×6,5×6,5 cm
Electrical products must not be thrown out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal in accordance with local emulations. Contact your local authorities or stockiest for advice on recycling.
Product conforms to European Union Directives
For indoor use only
For outdoor use only
Live: brown wire
Neutral: blue wire
Class II, double insulated, earth less
Not compatible with a dimmer
Light source (LED only) not replaceable
Non-replaceable power supply
This product contains a light source of energy class:
36W: ref.999105 60W: ref.999010
40W: ref.999200
General safety instructions
- The product must be installed by an electrician or any other qualified person and in accordance with the standards in force in the country of installation. To proceed with the installation or any maintenance or servicing work, disconnect the electrical supply.
- Do not look directly at the light source.
- Never touch the product when it is in operation, or when it has just been switched off.
- Do not use a damaged or modified power cord to avoid any risk of fire or electric shock.
- Before use, make sure that the product has not been damaged. If deterioration is observed, do not use the product.
- If the flexible outer cable or cord of this luminaire is damaged, it must be replaced by a special cable or cord supplied exclusively by the manufacturer, or its maintenance department.
Points de collecte sur
www.quefairedemesdechets.fr
