NINGBO LEADER 2APYY-AE0288 Transparent Speaker User Guide
- June 13, 2024
- NINGBO LEADER
Table of Contents
NINGBO LEADER 2APYY-AE0288 Transparent Speaker
Product Information
- Speaker Type: Transparent Speaker
- Charging Voltage: 5V/1A
- Maximum Audio Power: 5W
- Response Frequency: 70Hz~18KHz
- Bluetooth Version: 5.1
- Bluetooth Distance: 10M
- Battery Capacity: 500mAh (3.7V)
- Charging Time: 2 hours
- Play Time: 3-4 hours (70% volume, light off)
Transparent Speaker
Speciation
- Charging Voltage of Speaker : 5V/1A Maximum Audio Power: 5W
- Response Frequency: 70Hz~18KHz Bluetooth Version: 5.1
- Bluetooth Distance: 10M
- Battery Capacity: 500mAh (3.7V)
- Charging Time: ≈2 hours
- Play Time: ≈ 3-4 hours (70% volume, light off)
Part Name
- Power Switch
- Type-C Charging Port
- Mode Switch
Use Instructions
Charging
Connect the Type-C charging cable to the charging port. The indicator light
will turn red when charging begins. It will turn off when charging is
completed.
Usage
Press the power switch for 2 seconds to power on/off. Navigate to your
device’s Bluetooth menu.
Connect to “25171.” Once paired you will hear a beep. Tap the power switch to
play/pause music, or to answer/end an incoming call.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions
- This device may not cause harmful interference
- This device must accept any interference received , including interference that may cause undesired operation
The Bluetooth word mark and logos are registered trademark owned by Bluetooth SIG, Inc . and any use of such marks by.
NINGBO LEADER IMPORT AND EXPORT CO LTD is under license. Other trademarks and
trade names are those of their respective owners.
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>