CLEAN WATER SYSTEMS 9500-MTS-Softeners Residential Well Water Treatment Iron Filters Acid Neutralizers Chlorinators User Manual
- June 13, 2024
- CLEAN WATER SYSTEMS
Table of Contents
CLEAN WATER SYSTEMS 9500-MTS-Softeners Residential Well Water Treatment
Iron Filters Acid Neutralizers Chlorinators
All systems are available in single, duplex, triplex, and quadplex
operation.
Clean Water Systems has dedicated professional engineers with decades of
commerciaf water treatment experience. Over the years, they have built a
reputation for designing efficient, high quality commercial water softener
systems. Our 95MTS Series softeners provide up to 132 gpm continuous soft
water (Quadplex system with one tank allowed off line for regeneration at all
times) 24 hours a day. They are engineered and thoroughly tested to provide
years of reliable, trouble free performance with minimal maintenance.
Operating Parameters
- Operating pressure: 20 • 100 psi
- Operating temperature: 39 • 100° F
- Electrical: Input 120V 60 Hz· Output 24VAC
Materials of Construction
- Control Valve: Plastic PPO (Noryl)
- Resin Tanks: Corrosion resistant fibreglass reinforced polyethylene NSF 44 Certified
- Brine Tank: High density polyethylene {includes plastic salt plate, brine well & cap, air check and safety float)
- Ion Exchange Resin: High Capacity IAPMO certified 8% Canature resin
- Internal Distributors
Standard Features
- MTS Controller: Fully programmable remote mounted control box
- Parallel Flow: All tanks on-line and are interlocked so only one can regenerate at a time
- Alternating Flow: At least one tank is always off-line for regeneration or ready in stand by
- Demand Flow: Tanks come on or off-line according to the flow rate demand so that the system is always operating at optimum efficiency
- System Interlock: A signal from other equipment can be accepted to lock out and pFevent the system from regenerating –
- Advanced Diagnostic Information: Easily trouble shoot andaccess system information displayed in real time
- Auxiliary Outputs: Up to two programmable outputs/ relays can be -fl added -V
- Battery Back Up System: In the event-of a power loss, the system can continue to meter and monitor water usage for up to 9 hours
For Applications-Such As
- Apartments
- Boiler Treatment
- Cooling Towers
- Motels
- Schools
- Nursing Homes car wash
- Dairies
- Factories
- Laundromats
- Office Buildings
- Resorts
- Restaurants ORO Pre-treatment
- Office Buildings O Hospitals
Commercialjlndustrial Engineering Division
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>