WF440 Peepers 36pc Retail Therapy Peepers 32pc Counter Installation Guide
- June 13, 2024
- Peepers
Table of Contents
WF440 Peepers 36pc Retail Therapy Peepers 32pc Counter Installation Guide
Product Parts
- Attach the base to the display with the 1/4”-20 x 2.25” bolts.
- Attach themirrors to thedisplay. TURN PAGE FOR DETAILS.
- Attach the POS1/2” below themirror. Peel offprotective coating. TURN PAGE FOR DETAILS.
- Insert accessory hooks into the rail.
- Using the #6 x 1/2” pan head screws, attach the case holder to the top of the display.
- Starting from the bottom insert a5pc nose pieceinto the display panel, then a 3pc above. Repeat until all nose pieces are on the display. TURN PAGE FOR DETAILS.
If you experience any problems please call A. Pepper Designs at 412-434-8344 REF: Peepers 36pc counter display
PARTS LIST
-
1/4”-20 x 2.25” pan head (X2)
-
6 x 1/2” pan head sheet metal screw (X4)
-
POS holder (X2)
-
5pc Nose piece (4)
-
Case Holder
-
Hooks (X2)
-
Mirror (X2)
-
3pc Nose piece (4)
-
Double sided tape (X6)
If double sided tape is not attached already, put one piece on the top and
bottom of each POS card.
Attach the POS holders to the rails.Start by aligning the POS holders to the
center of the rail 1/2” below mirror. Remove adhesive backing and firmly stick to rail, repeat on other side.
If double sided tape is not attached already put a piece on the back of each mirror in this location
Attach mirrors (x2) to the side rails. First put the #6 x 5/8”silver screw
through the mirror hole and screw it into the rail until screw catches. Next
remove double sided tape on the back of mirror while screw is still not
tightendown. Now align mirror so it is vertically straight. Press mirror onto
the rail and finishing tightening screws, do not over tighten screws!!!
Insert nose pieces starting from the bottom
To remove: Pull the top of nose piece toward you, then pull entire nose piece up. There is a locking devise to prevent it fromcoming out.