FDF Ergometer USB Connectivity for FDF Consoles User Guide
- June 4, 2024
- FDF Ergometer
Table of Contents
USB Connectivity for
FDF Consoles
User Guide
USB CONNECTIVITY
Setting up USB Connectivity
- Download and Install the USB Device Driver (CDM2xxxx_Setup.exe for 32 and 64-bit Windows 10/8.1/7/Vista/XP) from the FDF Website
- Download and install Fluid Coach from the FDF Website
- Download and Install NetAthlon 2 XF for Rowers from http:/hvww.webracIng.org/downloads.htrn
Connecting your Console
- The USB Connector is located on a flying lead at the rear of the Console, along with the Sensor and Heart Rate Monitor Connectors
- Connect to a Laptop or PC using a standard USB cable, you may need to wait while Windows starts the USB Device Driver
- Note, that newer IPM Consoles provide an enclosed USB connector at the rear of the console
| |
---|---|---
USB with Sensor and HR Connectors| Console Connected using Standard USB
Cable| Connected to Laptop USB Port
NETATHLON 2 XF FOR ROWERS QUICK START
-
Install the USB Serial Device Driver (CDM2xxxx_Setup.exe).
-
Install NetAthlon 2 XF for Rowers.
-
Ensure your Console is turned on.
-
Connect your Console to your PC or Laptop via the USB port.
-
Run NetAthlon XF for Rowing.
-
Press any key to continue.
-
Click System Settings.
-
Click Exercise Equipment.
-
Select First Degree Fitness. Rower (USB).
-
Select Port (COMx).
-
Click Save.
***** You may need to repeat this procedure…
-
Click Race Now.
-
Start Rowing!
Please be noted that FDF does not directly support this Third Party Software.
See NetAthlon 2 XF documentation at:
http://www.webracinginc.com/ for further information and support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>