vonarx DTF-25-SH Diamond Shaver Installation Guide
- June 13, 2024
- vonarx
Table of Contents
vonarx DTF-25-SH Diamond Shaver
Product Information
The Side Attachment Unit is an accessory designed for use withthe machine. It allows for additional functionality and versatility in the machine’s operation. The unit includes a drum and a key groove for proper installation and alignment.
Product Usage Instructions
- Begin by removing the Side Cover. To do this, unscrew the 4 conical nuts located on the side of the machine. Set aside the Side Cover for later use.
- Next, unscrew the shaft nut and carefully remove the drum from the machine. Keep the drum in a safe place.
- Take the Side Attachment unit and position it on the machine. Make sure to align the Key on the unit with the key groove on the machine. This ensures proper installation and engagement.
- Once the Side Attachment unit is properly positioned, tighten the 4 conical nuts with cone to secure the unit to the housing of the machine.
Side Attachment Unit Installation
- Remove Side Cover by unscrew 4 conical nuts.
- Unscrew shaft nut and remove drum.
- Install Key and position shaft vertical.
- Put Side Attachment unit and the same time positioning the Key so that the key and key groove must match.
- Tight 4 conical nuts with cone to the housing of the machine.
Von Arx EOOD
20, Nedyalka Shileva str. Trakiya – Industrial zone 4000 Plovdiv, Bulgaria
e-mail: info@vonarx.com
VAT Number: BG202437214
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>