NEONAIL 21W/48 LED Lamp User Guide
- June 13, 2024
- NEONAIL
Table of Contents
NEONAIL 21W/48 LED Lamp
The device could be used by children under 8 year, mentally, physically disabled people or people without appropriate experience or knowledge only if an appropriate supervision or instruction will be ensured in a safety way so that the risk of using the device could be understandable. Do not allow children to play with the device. Children without the adult supervision should not wash and maintain the device. Use the equipment only with a power supply designed for it. The equipment should be powered only with very low (safe) voltage corresponding to its marking.
PACKING LIST
- a) Lamp
- b) Power supply
- C) User manual
LAMP DESCRIPTION
- Motion sensor
- Display
- Timer 305
- Timer 605
- Timer 995/ Low Heat Mode/Double Power
- Power supply connector
PURPOSE OF USE
Designed for professional nail experts. Perfectly cures UV gel/builder/LED
gel.
OPERATION INSTRUCTION
- a) Connect the power supply to the lamp.
- b) After starting the machine, select the lamp working time using the Timer 305/60S/99S. Pressing Low Heat Mode will slow heating of the device. The lamp power increases twice after 30 and 50 seconds. This mode is especially helpful in case of problems with nail gel curing.
- c) The 305/60S buttons support time memory function. Press for 2s one of the 30S/60S buttons to set your right working time. To cancel the function press again one of the 30S/60S buttons.
- d) The 99S button supports an extra function. During using one of the timers 305/60S press for 2s the 995 button to double the power of the device. Press the 99S button again for 2 seconds to change the power settings to defaults. To stop it press again the 995 button or any other timer button.
- e) You can start the device also using the motion detection function. The lamp turns on automatically when the hand gets into the device. Max. working time in this mode is 99 sec.
- f) When the timer mode is ON, the display shows the countdown time. The display shows the clockwise time, when the machine detects movement and gets started by the motion sensor or when the user presses the 995 button.
- g) The lamp has an energy save mode. After 40 minutes of inactivity, the display will turn off automatically. Putting your hand into the lamp or pressing any button will restart it.
TECHNICAL INSTRUCTION
- 21 LEDs
- Max. power: 21 W
- DC 24V: 1.2A
- Size: 215×168×90mm
- Wavelength: 365-405m
CAUTIONS
- a) Please read the instruction carefully before using the lamp.
- b) Please use the lamp according to its destination.
- c) The device should be placed away from vases, bottles, aquariums and other water containers in order to avoid damage. Do not touch the mains plug with your bare hands.
- d) When the timer button is out off function, please do not use the device.
- e) Please unplug the power supply, when you finish using the lamp.
- f) Disconnect the device from the mains during thunderstorms or when it is not to be used for an extended period of time.
- g) Please do not use the lamp longer than 600 minutes continuously, otherwise it may reduce the time life of the lamp.
- h) When using, please wear protective glasses.
- i) If the unplugged power cord is damaged, it should be replaced by the manufacturer or a service technician or by a qualified person to avoid risk
Cosmo Group Sp. z o.0. Sp. k. ul. Jasielska 10A, 60-476 Poznan, Poland
www.neonail.com
Made in PRC
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>