SoundControlTechnologies AW-HE38H Remote CamUSB User Guide

Table of Contents

SoundControlTechnologies-AW-HE38H-Remote-CamUSB-
PRODUCT

Product Name: RCU2S-G30TM USB
Application: USB Application Guide
Compatible Model: Panasonic AW-UE70
Front Panel: Field-Upgradeable microSD Slot
USB Cable: RCC-M004-1.0M USB-B (RCU2S-HETM) to USB-A
RJ11 Cable: RCC-C029-0.3M RJ11 (RCU2S-CETM) to DC Plug
USB Cable: RCC-M007-0.3M USB-A (RCU2S-CETM) to USB Mini-B
Module Dimensions:
- RCU2S-CETM: H: 0.789(20mm) x W: 2.264(57mm) x D: 3.725(94mm)
- RCU2S-HETM: H: 1.448(36mm) x W: 3.814(96mm) x D: 3.578(90mm)
SCTLinkTM Cable: Power, UVC Control & Video
SCTLinkTM Cable Requirements:
- Must be a single, point-to-point CAT cable
- No couplers or interconnections allowed
SCTLinkTM Cable Specs:
- Integrator-Supplied CAT5e/CAT6 STP/UTP Cable T568A or T568B wiring standard
- Maximum Length: 100m
RJ45 Pinout:
- Pin 1: G
- Pin 2: O
- Pin 3: B
- Pin 4: G
- Pin 5: B
- Pin 6: R
- Pin 7: B
- Pin 8: R
Power Supply: W PS-1230VDC 100-240V 47-63Hz

Connect the RCU2S-G30TM USB to the Panasonic AW-UE70 using the appropriate USB cable (RCC-M004-1.0M USB-B to USB-A).
If required, connect the RJ11 cable (RCC-C029-0.3M RJ11 to DC Plug) to the corresponding port on the RCU2S-G30TM USB module.
If necessary, connect the USB cable (RCC-M007-0.3M USB-A to USB Mini-B) to the relevant port on the RCU2S-G30TM USB module.
Ensure the module dimensions are suitable for your setup. The RCU2S-CETM module has dimensions of H: 0.789(20mm) x W: 2.264(57mm) x D: 3.725(94mm), while the RCU2S-HETM module has dimensions of H: 1.448(36mm) x W: 3.814(96mm) x D: 3.578(90mm).
Connect the SCTLinkTM Cable to enable power, UVC control, and video transmission. The cable must be a single, point-to-point CAT cable without any couplers or interconnections.
Make sure to use integrator-supplied CAT5e/CAT6 STP/UTP cable for the SCTLinkTM Cable and follow either the T568A or T568B wiring standard. The maximum length of the cable should not exceed 100m.
Refer to the RJ45 pinout for proper connection. The pinout is as follows: Pin 1: G, Pin 2: O, Pin 3: B, Pin 4: G, Pin 5: B, Pin 6: R, Pin 7: B, Pin 8: R.
Finally, connect the power supply (W PS-1230VDC 100-240V 47-63Hz) to the RCU2S-G30TM USB for proper functioning.

TheRCU2S-G30™supports multiple camera models:

RCU2S-G30™USB Application Guide

Module Dimensions

Read User Manual Online (PDF format)