NRS M11077 Adjustable Bath Step and Support Pillars Instruction Manual
- June 13, 2024
- NRS
Table of Contents
- M11077 Adjustable Bath Step and Support Pillars
- Product Information
- Product Usage Instructions
- General Safety Warning
- INTENDED USE
- SAFETY
- UNPACKING
- **ASSEMBLY/INSTALLATION
- MAINTENANCE
- CLEANING INSTRUCTIONS.
- ACCESSORIES AND SPARE PARTS
- PRODUCT DISPOSAL
- PRODUCT GUARANTEE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
M11077 Adjustable Bath Step and Support Pillars
Product Information
The NUVO Adjustable Bath-Step is designed to assist users in transferring into and out of the bath by reducing the step-over height. It can also provide support when using the toilet or sink in a bathroom environment. The maximum user weight for this product is 317kg (50st). The maximum step height is 175mm (7) when using 6-step sections (2 packs).
Product Usage Instructions
-
Unpacking:
Remove the packaging and carefully check all parts. If any parts are missing or damaged, contact your supplier immediately and do not attempt to assemble them. -
Maintenance:
Regularly check that all support pillars are inserted correctly and any additional sections are securely fitted. Inspect the product for signs of wear or damage. If any faults or damage are suspected, immediately report to the supplier and discontinue use. -
Cleaning Instructions:
Clean regularly using a general purpose, neutral detergent, and warm water. Check the suitability of cleaning products before use. Do not use abrasive cleaners or cloths, as they may permanently damage the surface and invalidate the warranty. To disinfect, wipe with a dilute bleach solution and rinse thoroughly with fresh water. Allow the product to dry fully before use or storage. -
Accessories & Spare Parts:
M24345: Support Pillars x 4. For more details, visit our website or call Customer Services on the provided contact details. -
Product Disposal:
Link the two sections together by overlapping the cutout section on one with the protruding lip on the other.
INSTRUCTIONS ADJUSTABLE BATH-STEP RANGE
M11077
Adjustable Bath Step & Support Pillars
General Safety Warning
Please make sure that you read and follow these instructions carefully. Keep these instructions in a safe place for future reference.
Maximum User Weight
INTENDED USE
The NUVO Adjustable Bath-Step has been designed to assist users in transferring into and out of the bath by reducing the step-over height. It can also provide assistance when using the toilet or sink in a bathroom environment.
SAFETY
- WARNING: The maximum user weight must not be more than 317Kg (50st).
- WARNING: The maximum step height is 175mm (7”) using 6 step sections (2 packs).
- DO NOT: Stack more than 6 step sections together.
- ALWAYS: Make sure the bottom section of the step has 4 support pillars inserted into the base.
UNPACKING
Remove the packaging and check all parts carefully. Contact your supplier immediately if parts are missing or damaged and do not try and assemble.
Contents:
- Step 50mm (2”) x 3
- Support Pillar x 4
**ASSEMBLY/INSTALLATION
**
Single Step – 50mm (2”) Step Height:
- Turn one step section upside down and lay fl at.
- Push the four support pillars into position (see Figure 1).
- Turn the step over to stand on the pillars and place it in the desired location.
Two Steps – 75mm (3”) Step Height:
- Turn one step section upside down and lay fl at.
- Push the four support pillars into position (see Figure 1).
- Place an additional step section on top of the first.
- Push down firmly to secure.
Three Steps – 100mm (4”) Step Height:
- Place an additional step section on top of the top step section.
- Push down firmly to secure.
For a Step Sequence:
This setup provides a series of 2 steps, the first at 50mm (2”), and the
second at 75mm (3”).
Note : An additional set of support pillars is required to achieve this setup. See Section 7.0 for details.
- Turn two step sections upside down and lay fl at. These will become the base steps.
- Push the 8 x support pillars into position, four on each step section (see Figure 1).
- Turn the base steps over to stand on the pillars.
- Link the two sections together by overlapping the cutout section on one with the protruding lip on the other.
- Push down firmly to secure.
- Place the additional step section on top of the base section.
- Push down firmly to secure.
Note : To achieve a similar setup with greater height or more steps in
the sequence, additional packs of steps and support pillars must be purchased.
Note : The safe maximum step height is 175mm (7”). This uses 2 packs,
6-step sections. Do not stack more than 6 sections together
MAINTENANCE
- Check that all support pillars are inserted correctly and any additional sections are securely fi tted.
- Inspect the product regularly for signs of wear or damage. Any suspected faults or damage should immediately be reported to the supplier and the product taken out of use.
CLEANING INSTRUCTIONS.
- Clean regularly using a general purpose, neutral detergent, and warm water.
- Please check the suitability of the cleaning products before use. Do not use abrasive cleaners or cloths as these could permanently damage the surface and invalidate any warranty.
- To disinfect, wipe with a dilute bleach solution and rinse thoroughly with fresh water.
- This product can be autoclaved on cycles up to 80°C.
- Allow the product to dry fully prior to use/storage.
ACCESSORIES AND SPARE PARTS
- M24345: Support Pillars x 4
- For more details please visit our website or call Customer Services on the details below.
PRODUCT DISPOSAL
- This product must be thoroughly cleaned/sterilized prior to disposal.
- This product is manufactured from plastic and can be disposed of through Local Authority Household Waste and Recycling Centres or through Local Trade Waste Collectors.
PRODUCT GUARANTEE
- NRS Healthcare guarantees this product for a period of 12 months, from the date of purchase, against faulty materials and workmanship.
- This guarantee does not cover; abuse, misuse, interference, or tampering with any part of the product.
- Any guarantee issued by NRS Healthcare does not affect your statutory rights.
NRS HEALTHCARE Sherwood House, Cartwright Way, Forest Business Park Bardon
Hill, Coalville, Leicestershire, LE67 1UB, UK.
Tel: Customer Services: 0345 121 8111
Email:
customerservice@nrshealthcare.co.uk
NRS Healthcare is a leading supplier of community equipment and daily living
aids. Please visit one of our websites to view our full range of products:
www.healthcarepro.co.uk or
www.completecareshop.co.uk
References
- Buy Mobility Aids & Equipment | Complete Care Shop
- Healthcare Pro - the new online store for NRS Healthcare
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>