Arlux ALTO Wall Projector Instruction Manual

: June 13, 2024
: Arlux

Table of Contents

Arlux ALTO Wall Projector
Product Information
Product Usage Instructions
Overview
Dimension
Tools
Features
General Safety Instructions
Power
Installation Instructions
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Arlux ALTO Wall Projector

Product Information

The product is a series of ALTO lights available in different wattages and sizes. It is designed for various uses and comes with different power options.

Product Codes: 3297022006500, 3297022006524, 3297022006548, 3297022006562, 3297022006586, 3297022006609, 3297022006623, 3297022006647, 3297022006661, 3297022006685
Wattage Options: 10W, 20W, 30W, 50W, 100W
Protection Level: IP65
Operating Voltage: 230V
Dimensions (LxWxH):
- 10W: 13.3 x 8.8 x 5.5 cm
- 20W: 15.7 x 10.1 x 5.6 cm
- 30W: 17.7 x 11.7 x 5.6 cm
- 50W: 19.5 x 15.2 x 5.7 cm
- 100W: 23.5 x 19.1 x 5.7 cm
- 10W: 13.3 x 11.3 x 5.5 cm
- 20W: 15.7 x 12.8 x 5.6 cm
- 30W: 17.7 x 14.3 x 5.6 cm
- 50W: 19.5 x 17.8 x 5.7 cm
- 100W: 23.5 x 21.7 x 5.7 cm

Product Usage Instructions

Select the desired wattage and size of the ALTO light.
Ensure that the operating voltage is compatible with your electrical system (230V).
Place the ALTO light in the desired location.
Connect the ALTO light to a power source using appropriate electrical connections.
Make sure the ALTO light is securely installed and protected from water and dust.
Switch on the power supply to activate the ALTO light.
To adjust the direction of the light, use the adjustablemounting brackets (if provided).
To turn off the ALTO light, switch off the power supply.

Note: Refer to the user manual for detailed instructions specific to your chosen ALTO light model.

Overview

~10s – 7min
120° – Max.10m
10-2000 lux

Dimension

Tools

Features

Integrated LED circuit

| | CRI| | |
---|---|---|---|---|---
3297022006500| 10W| > 70| IP 65| 230V| 13.3×8.8×5.5 cm
3297022006524| 20W| > 70| IP 65| 230V| 15.7×10.1×5.6 cm
3297022006548| 30W| > 70| IP 65| 230V| 17.7×11.7×5.6 cm
3297022006562| 50W| > 70| IP 65| 230V| 19.5×15.2×5.7 cm
3297022006586| 100W| > 70| IP 65| 230V| 23.5×19.1×5.7 cm
3297022006609| 10W| > 70| IP 65| 230V| 13.3×11.3×5.5 cm
3297022006623| 20W| > 70| IP 65| 230V| 15,7×12,8×5,6 cm
3297022006647| 30W| > 70| IP 65| 230V| 17,7×14,3×5,6 cm
3297022006661| 50W| > 70| IP 65| 230V| 19.5×17.8×5.7 cm
3297022006685| 100W| > 70| IP 65| 230V| 23.5×21.7×5.7 cm

: Electrical products must not be thrown out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal in accordance with local egulations. Contact your local authorities or stockist for advice on recycling.
: Product conforms to European Union Directives

For outdoor use only
L: Live: brown wire
N: Neutral: blue wire
Earth: green/yellow wire
Not compatible with a dimmer
Light source (LED only) not replaceable
Non-replaceable power supply

This product contains a light source of energy class F.

10W: 999165
20W: 999166
30W: 999167
50W: 999168
100W: 999169

General Safety Instructions

The product must be installed by an electrician or any other qualined person and in accordance with the standards in force in the country of installation. To proceed with the installation or any maintenance or servicing work, disconnect the electrical supply.
Do not look directly at the light source.
Never touch the product when it is in operation, or when it has just been switched off.
Do not use a damaged or modified power cord to avoid any risk of fire or electric shock.
Before use, make sure that the product has not been damaged. If deterioration is observed, do not use the product.
If the flexible outer cable or cord of this luminaire is damaged, it must be replaced by a special cable or cord supplied exclusively by the manufacturer, or its maintenance department.