CASIO PX-S6000BK Digital Piano Black User Guide
- June 13, 2024
- Casio
Table of Contents
PX-S6000BK Digital Piano
Black User Guide
PX-S6000BK Digital Piano Black
After reading this document, keep it in a safe place along with the warranty
certificate. Be sure to read the “Safety Precautions” in the separate “READ
THIS!” sheet, and use the product correctly.
For more detailed information about the product and its operation, visit the
CASIO website.
Available Information: User’s Guide, etc.
https://support.casio.com/global/en/emi/manual/PX-S5000/
When the Digital Piano is being operated on battery power only, notes may
sound distorted when performing or playing back a song at maximum volume. This
is due to the difference between AC adaptor power and battery power, and does
not indicate Digital Piano malfunction. If you notice distortion, switch to AC
adaptor power or lower the volume level.
Included Accessories
- Music Stand
- AC adaptor
- Power cord
- Pedal
- Wireless MIDI & audio adaptor
- Leaflets
- READ THIS! Sheet
- Other (Warranty, etc.)
Items included as accessories are subject to change without notice.
Preparation
Preparing a Power Supply
■ Using the AC Adaptor
- Connect the AC adaptor as shown in the illustration on the right.
● Make sure that you use only the AC adaptor specified for this Digital Piano.
■ Using Batteries
1.
2. Load six AA-size batteries.
3.
4. Specify the battery type.
Specify the battery type by holding down the FUNCTION button and pressing the
F7 key.
One tone: Alkaline batteries
Two tones: Rechargeable nickel metal hydride batteries*
- The volume and sound quality are adjusted to suit the battery characterstics.
Computer, smartphone, etc. (commercially available)
● Connect using a USB cable that is no more than two meters long.
Basic Operation
Wireless functions (using the Included Wireless MIDI & audio adaptor)
The operations described below are enabled while the Wireless MIDI & audio
adaptor is plugged into the USB Type A port.
- Sound playback of a Bluetooth-connected smart device through the Digital Piano’s speakers
- Use MIDI functions over a Bluetooth Low Energy connection
- Use a smart device app
Touch Response
Pressing a key harder produces louder sound, while a softer key press produces
softer sound.
Demo Play
Hold down the FUNCTION button and touch the SOUND MODE button to start demo
song playback. Touch the ▶/◼ button to stop playback.
Auto Power Off
If the Digital Piano is left unused, it automatically shuts down after
approximately 4 hours when using the AC adaptor or after 6 minutes when using
batteries (On, Off switchable).
Performance Recording/Playback
Touch the ● (REC) button and begin playing on the keyboard. To end the
recording, touch the ● (REC) button again. To play back the recorded content,
touch the ▶/◼ button.
Pedal
Functions as a damper pedal under the Digital Piano’s initial default
settings. To use the optional pedal unit (SP-34), connect it to the PEDAL UNIT
jack.
- For detailed information on using the functions, refer to the User’s Guide on the CASIO website.
Basic Settings Such as Tuning
FUNCTION
Select a key while holding down the FUNCTION button.
- If you press a key while changing a setting, the number of times the notification tone sounds varies according to the value set and the sequence.
- When you disable a setting, a low tone sounds.
If you select a function marked with an asterisk (*), pressing the C1 key
executes that function.
Example: To restore the factory default settings (factory reset)
Hold down the FUNCTION button and press the A0 key and then the C1 key.
Reference
Product Specifications
Model: PX-S5000BK
Keyboard: 88-key piano keyboard; Duet: Adjustable tone range (–2 to +2
octaves);
Transpose: –12 to 0 to +12 semitones; Octave shift: –2 to 0 to +2 octaves
Sound Source: Number of Tones: 23 (22 full-keyboard tones + 1 low-range
bass tone);
Layer (excluding bass tone); Split (bass tone only in low range); Maximum
polyphony: 192 notes;
Touch Response (5 sensitivity levels, Off); Tuning: 415.5Hz to 440.0Hz to
465.9Hz (0.1Hz units);
Temperament: Equal temperaments plus 16 other types
Acoustic Simulator: Hammer response, Key off response, String resonance,
Damper resonance, Damper noise, Key on action noise, Key off action noise
Sound Mode: Hall simulator (4 types), Reverb (8 types), Surround (2
types)
Other Effects: Chorus (4 types), Brilliance (–3 to 0 to 3), Headphones
mode
Demo Song: 1
Music Library: Built-in Songs: 60, User Songs: 10 (Up to approximately
100KB per song, approximately 1MB for 10 songs)*; Song volume: Adjustable
(Setting also affects MIDI recorder song playback.);
Part On/Off: L, R
-
Based on 1KB = 1024bytes, 1MB = 10242 bytes
MIDI Recorder: Functions: Real-time recording, playback; Number of Song: 1; Number of Tracks: 2;
Capacity: Approximately 10,000 notes total; Recorded Data Protection: Built-in flash memory; MIDI recorder volume: Adjustable (Setting also affects Music Library song playback.)
Audio Recorder: Real-time recording and playback as audio data; Number of songs: 99 (files);
File format: WAV (linear PCM, 16bit, 44.1kHz, stereo); Maximum recording time: Approximately 25 minutes per file; Recording medium: USB Flash Drive
Metronome: Beat bell: Off, 1 to 9 (beats); Tempo Range: 20 to 255; Metronome Volume Level: Adjustable
Pedals: Included SP-3 pedal assignable functions: Damper (off, on), sostenuto (off, on), soft (off, on), metronome (start, stop), tempo setting; Separately available SP-34 pedal unit: Damper (continuously variable), sostenuto (off, on), soft (off, on)
Other Functions: Auto Resume; Operation Lock; Notification tones (Selectable sets 1, 2, 3; Adjustable volume)
MIDI: 16-channel multi-timbre receive
Inputs/Outputs: PHONES jacks: Stereo mini jacks (3.5mm) × 2; Power: 12V DC; LINE OUT R, L/MONO jacks: Standard jacks (6.3mm) × 2 (Output impedance: 600Ω, Output voltage: 1.3V (RMS) MAX); USB port: Type A, Type B; DAMPER PEDAL jack: Standard jack (6.3mm); PEDAL UNIT jack: Proprietary jack
Acoustics: Amp output: 8W + 8W; Speakers: 16cm × 8cm (oval) × 2
Power Supply: 2-way power supply
Auto Power Off: Approximately 4 hours (under AC adaptor power) or 6 minutes (under battery power) after last operation, can be disabled.
AC Adaptor: AD-A12150LW
Batteries: 6 AA-size alkaline batteries or AA-size rechargeable nickel metal hydride batteries;
Approximately 4 hours (alkaline batteries) or approximately 4 hours (nickel metal hydride batteries) continuous operation* -
Measured values while using eneloop batteries. eneloop is a trademark of Panasonic Corporation.
- Actual continuous operation time may be shorter due to battery type, performance type, and usage environment.
- Specifying the wrong battery type can cause incorrect display of the battery level and sudden loss of power.
- For detailed information on using the functions, refer to the User’s Guide on the CASIO website.
Power consumption: 12V ****10W
Dimensions: 132.2 (W) × 23.2 (D) × 10.2 (H) cm (52 1/16 × 9 1/8 × 4 inch)
Weight: Approximately 11.5 kg (25.4 lbs) (without batteries)
- Specifications and designs are subject to change without notice.
- Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.
- IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- The contents of this manual are subject to change without notice.
- Company and product names used in this manual may be registered trademarks of others.
Declaration of Conformity
Model Number: PX-S5000
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
A labels rating is affixed to the bottom of the product.
Functions Not Covered in This Manual
These instructions provide general information about main functions. For more
detailed information, refer to the “User’s Guide”.
https://support.casio.com/global/en/emi/manual/PX-S5000/
The “User’s Guide” includes information on the topics listed below.
- 23 tones for keyboard play
- Adjustable Touch Response
- Hall simulator/Reverb and surround effects
- Metronome to guide practice
- Duet Mode
- Built-in tune playback and practice
- Keyboard play recording
- Smart device linking for enhanced function
- Other
About Music Score data
You can download music score data as a PDF file from the CASIO website. You
will then be able to view music scores on your smart device. You can jump from
the PDF file table of contents directly to the music score you want, and you
can print out scores as needed.
https://support.casio.com/global/en/emi/manual/PX-S5000/
Changing Settings Such as the Sound Mode
SOUND MODE
Select a key while holding down the SOUND MODE button.
- If you press a key while changing a setting, the number of times the notification tone sounds varies according to the value set and the sequence.
- When you disable a setting, a low tone sounds.
Using the Sound Mode Effects (Hall Simulator/Reverb and Surround)
■ To enable or disable the Hall Simulator/Reverb and Surround effects
The LED lights change as shown below each time you touch the SOUND MODE
button.
■ To specify the Hall Simulator/Reverb type
Hall Simulator
The hall simulator effect simulates the rich clarity, unconstrained
brilliance, and other distinctive acoustic characteristics of world-famous
concert halls and structures.
- Hold down the SOUND MODE button and press any key from A0 to C1.
Reverb
Reverb simulates ambient spaces, such as a room or hall.
- Hold down the SOUND MODE button and press any key from C{1 to A}1.
Changing the Metronome and Tempo Settings
Select a key while holding down the METRONOME button.
- If you press a key while changing a setting, the number of times the notification tone sounds varies according to the value set and the sequence.
- When you disable a setting, a low tone sounds.
Using the Metronome
Touch the METRONOME button to start the metronome.
Touch the METRONOME button again to stop the metronome.
Setting the Tempo Using the Number Keys (10-key)
Hold down the METRONOME button and use the B0 to A}1 keys to enter the tempo
setting.
Input three digits for the tempo setting value.
Selecting Songs
Select a key while holding down the ▶/◼ button.
- If you press a key while changing a setting, the number of times the notification tone sounds varies according to the value set and the sequence.
Inputting Song Numbers Using the Song Selection Keyboard Keys (10-key)
Hold down the ▶/◼ button and use the C1 to A1 keys to enter the song
number.
- Input two digits for the song number.
Song Number | Songs |
---|---|
1 to 60 | Built-in Music Library Songs |
61 to 70 | User Songs |
71 | MIDI Recorder Song |
Changing Settings Such as the Tone
GRAND PIANO
Select a key while holding down the GRAND PIANO button.
- If you press a key while changing a setting, the number of times the notification tone sounds varies according to the value set and the sequence.
- When you disable a setting, a low tone sounds.
CASIO COMPUTER CoO., LTD.
6-2, Hon-machi 1-chome
shibuya-ku, Tokyo 151-8543, Japan
MA2203-A Printed in China
© 2022 CASIO COMPUTER CO., LTD.
Documents / Resources
|
CASIO PX-S6000BK Digital Piano
Black
[pdf] User Guide
PX-S6000BK Digital Piano Black, PX-S6000BK, Digital Piano Black, Piano Black,
Black
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>