ORIMA ALFA 2.1 Stand for Flat Roofs Installation Guide
- June 13, 2024
- ORIMA
Table of Contents
ORIMA ALFA 2.1 Stand for Flat Roofs
Product Information
The ALFA 2.1 is a solar panel mounting system designed for flat roofs. It is a product of Nordic Solar Partner. The ALFA stands come in two variants.
MEASUREMENTS
Alfa stands are delivered pre-assembled. Project specific wind load calcium- lotion and ballast layout. Maximum concrete block sizes for the ballasting of rear wind deflector.
TOOLS
-
Hex key 6
-
Screwdriver
-
Socket wrenches
-
Torque wrench
© Copyright Oria -Tuite Oy. Canaanite 6, FI-16300 Primatial Unauthorized use and copying is forbidden. www.orima.fi
ALF STA ANDS
Protective Rubber Mat for Bitumen 36580
Protective Rubber Mat for PVC 38160
- 4 pc./Alfa, 2 pc./Alfa Sing
Joint piece 38790 Taptite M6x16 40124
Field spacing
BALLAST AND WIND DEFLECTOR
Placing lacing of of ballast ballast blob locks cks on on rear rear wind wind ((338800-X)8800-X)
NOTE! When have installing to be panel installed wider before than PV1100 mm wind deflectors panels.
Rear wind DE Ector models
38800-* | -1 | -2 | -3 | -4 | -5 | -6 | -7 | -8 | -9 | -10 |
---|---|---|---|---|---|---|---|---|---|---|
Panel range [mm] | 1640- |
1690
| 1690-
1740
| 1740-
1790
| 1790-
1840
| 1840-
1890
| 1890-
1940
| 1940-
1990
| 1990-
2040
| 2040-
2090
| 2090-
2140
Ballast blocks| 5| 5| 5| 5| 5| 6| 6| 6| 6| 6
Secondary placing of ballast blocks
Other ballast block sizes may be placed on the bottom beam. For example
INSTALLING THE PANELS
Easy Rail Middle Clamp Set 40 mm 10 pc. 36780, black 3678033 Easy
Rail End Clamp Set 40 mm 8 pc. 36770, black 3677033
Easy Rail Middle Clamp Set 35 mm 10 pc. 36540, black 3654033 Easy
Rail End Clamp Set 35 mm 8 pc. 36530, black 3653033
Easy Rail Middle Clamp Set 30 mm 10 pc black 3858033
Easy Rail End Clamp Set 30 mm 8 pc, black 3857033
Bi-directional integrated cabler outing.
ACCESSORIES
ALFA ALPINE 38760 Additional middle support for snowy regions. + 2x
Protective Rubber Mat (Bitumen 36580/PVC 38160)
2x End Clamp Maximum panel width 1070 mm Solar UP – Universal
Platform Non penetrating fi Xing system for fl at and low slope SBS/bitumen
roofs.
UP Plate 36300
UP SBS Ma t 36390
UP Bolt Set, 10 pc. 36310 Installation guide: Solar UP – Universal
Platform
UP plate placing
- First 1300mm.
- Next 1600mm.
Cable holder 50 pc. 36550
Cable holder attached to the panel frame. Can hold up to 4 cables. One holder
per one panel.
Grounding washer 50 pc. 36760
Use to ensure the continuity of grounding. Install the grounding washer
under one middle clamp