tp-link TL-FC1420 14 Slot Rackmount Chassis User Guide
- June 13, 2024
- tp-link
Table of Contents
tp-link TL-FC1420 14 Slot Rackmount Chassis
Package Contents
Chassis, AC Power Cord, Fourteen Retainer-plates, Installation Guide
The pictures are for demonstration purposes only. The actual product may differ in appearance from the depicted.
Installation
Step 1: Install the Media Converters in the Chassis
-
Tweak out the two screws on the media converter. Then install the retainer-plate (provided with the chassis) to the media converter using the screws removed from the media converter.
-
Remove the front metal plate of the slot on the chassis, then carefully slide the media converter into the slot and lock it tightly with the locking knob.
Step 2: (Optional) Install the Redundant Power Supply Module
Remove the protective cover on the power supply module slot of the chassis.
Then gently push in the module and plug it solidly into the connector.
Step 3: Mount the Chassis on the Rack
Note:
- The chassis supports EIA standard-sized, 19-inch racks.
- For security reasons, it is recommended to install the chassis as shown below.
Fasten the chassis to the rack with screws through the holes of the brackets
on each side.
Step 4: Power On
-
Electrically connect the Grounding Terminal on the rear panel of the chassis to ground via the ground cable.
-
Connect the chassis to the AC outlet using the provided power cord.
Panel Layout
Note:
- An optional AC or DC power supply is available for installation in the optional power supply position.
- The power source should comply with Electrical Energy Source Class 1 (ES1) of IEC 62368-1.
LED Explanation
Power
On: Power on
Off: Power of
FAN
On: The fans are working properly.
Off: The fans are working abnormally.
Specifications
AC Power Supply| Input: 100–240 V ~ 50/60 Hz 1.8 A (Max) Output: 12 V, 6.25 A
(Max) Ripple & Noise: < 180 mV (0˚C to 50˚C); < 250 mV (-10˚C to 0˚C)
---|---
DC Power Output per Slot| TL-MC1400: 9 V/0.6 A TL-FC1420: 5 V/0.6 A
LED| Power, FAN
Dimensions (W×D×H)| 482 × 309 × 86 mm
Hot-swappable| Yes
Overload Protection| Yes
Environmental and Physical Specifications
Operation Temperature| TL-MC1400: 0˚C to 40˚C (32˚F to 104˚F) TL-FC1420: 0˚C
to 50˚C (32˚F to 122˚F)
Storage Temperature| -40˚C to 70˚C (-40˚F to 158˚F)
Operation Humidity| 10% to 90% RH non-condensing
Storage Humidity| 5% to 90% RH non-condensing
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
- The label is placed on the bottom surface of the product.
- Place the device with its bottom surface downward.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- Plug the product into the wall outlets with earthing connection through the power supply cord or plug.
In Denmark: Apparatets stikprop skal tilsluttes en stikkontakt med jord
som giver forbindelse til stikproppens jord.
In Finland: Laite on liitettävä suojakoskettimilla varustettuun
pistorasiaan
In Norway: Apparatet må tilkoples jordet stikkontakt
In Sweden: Apparaten skall anslutas till jordat uttag
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp- link.com/en/ce.
FCC compliance information statement
Product Name: 14-Slot Rackmount Chassis
Model Number: TL-MC1400/TL-FC1420
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Industry Canada Statement
CAN ICES-3 (A)/NMB-3(A)
CE Mark Warning
This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Caution
Shock hazard
Disconnect all power sources
Explanation of the symbols on the product label
| Indoor use only
---|---
| RECYCLING This product bears the selective sorting symbol for Waste
electrical and electronic equipment (WEEE). This means that this product must
be handled pursuant to European directive 2012/19/EU in order to be recycled
or dismantled to minimize its impact on the environment. User has the choice
to give his product to a competent recycling organization or to the retailer
when he buys a new electrical or electronic equipment.
| DC voltage
| AC voltage
| Polarity of output terminals
| Polarity of the power supply module
| Caution, risk of electric shock
| Disconnection, all power plugs
Customer Support
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
References
- Link: Simple, secure one-click payments
- CE Regulatory Compliance | TP-Link
- WiFi Networking Equipment for Home & Business | TP-Link
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>