FITFIU FITNESS BESP-250 Indoor Bike Instruction Manual
- June 13, 2024
- FITFIU FITNESS
Table of Contents
FITFIU FITNESS BESP-250 Indoor Bike
Product Information
- Product Name: BESP-250
- Product Manual: Manual de usuario Istruction manual
- Compatible Apps: ZWIFT, KINOMAP
Box Contents:
- 12 – M8x50 (4 units)
- 22 – M5X10 (1 unit)
- 17 – Nut
- 13 – Washer (4 units)
- 16 – Washer (1 unit)
- 11 – Nut
- 19/20/21 – Sensor Cable (3 units)
- 25 – Pulse Cable
- 26/27 – Pulse Cable (2 units)
- 1 – Body
- 2 / 3 – Rear and Front Stabilizer
- 3 – Pedals
- 9 – Display
- 8 – Handlebar
- 5 – Sliding Seat Tube
- 14 – Adjustment Knob (1 unit)
- 7 – Handlebar Support
- 15 – Adjustment Nut (1 unit)
- 15 – Locking Knob (1 unit)
Product Usage Instructions
Assembly
Step by step instructions:
- Insert the adjustment tube into the corresponding hole of the seat tube.
- Connect the sensor cable to the corresponding hole of the adjustment tube.
Operation
Display Specifications:
- TIME (TMR): 00:00 00 – 99:59 MIN
- SPEED (SPD): 0.0 – 99.9 KM/H
- DISTANCE (DST) : 0.00 – 99.999.99 KM
- CALORIES (CAL): 0 – 9999 KCAL
- PULSE (PULSE): 40 – 240 BPM (optional)
- RPM (Revolutions Per Minute): 0 – 999 R/MIN
Operation:
- Press the MODE button when the pointer is on TIME to display the total working time.
Maintenance
General maintenance guidelines:
- For more information on guaranteed components, please visit the website www.fitfiu-fitness.com
Date of Manual Revision: May 2023
HELLO!
Thank you very much for trusting FITFIU Fitness!
Whether you are just starting out in the world of fitness, you are an amateur
athlete or you already have a background in the world of sport… FITFIU will be
your ally in getting in shape! Doing physical exercise offers multiple
benefits and the possibility of doing it at home will make it more accessible
to be able to train constantly.
This product has been designed for spinning at home. Spinning is an excellent
physical exercise for increasing the capacity of the cardiovascular system and
burning calories. It tones the muscles of the lower limbs (buttocks,
quadriceps, abductors and calves) and also works the muscles of the upper body
(abs, back and arms). This bike has a belt drive for smoother, smoother,
quieter, quieter and shock-free pedalling.
We hope you enjoy your FITFIU Fitness experience to the fullest!
PRECAUTIONS FOR USE
Before using this equipment, follow the instructions carefully and read all precautions. Then keep them for future reference.
-
Be sure to read this entire manual before assembling or using the equipment. It is your responsibility to make sure that everyone using the equipment is aware of the warnings and cautions!
-
If you are thinking of starting an exercise programme, it would be a good idea to talk to your doctor first. Especially if you have a medical condition that could jeopardise your safety while exercising. If you are taking medications that affect your heart rate, blood pressure or cholesterol level, listening to your doctor’s advice is most important.
-
Your body is talking to you. If you feel chest pain, irregular heartbeat, shortness of breath, dizziness, lightheadedness or nausea, stop exercising immediately! If you feel anything like this, it’s best to talk to your doctor before continuing with your exercise programme.
-
Be sure to warm up before physical activity to avoid muscle injury and to perform a relaxation routine after exercise.
-
Persons with an implanted pacemaker, defibrillator or other electronic device are cautioned that use of this heart rate sensor is at their own risk.
-
The use of pulse sensors is not recommended for pregnant women.
-
Keep children and pets well away from the equipment. Remember that it is designed for adults only.
-
Place the equipment on a flat, solid, level surface. Place a protective cover if it is on the floor or carpet. For safety, make sure there is at least 0.6 metres of free space around the equipment.
-
Before starting the equipment, make sure that all nuts and bolts are tightened securely.
-
The safety of the equipment is only guaranteed if you check it regularly for damage and wear.
-
Always use the equipment as explained in the manual. If you notice something broken or hear strange noises when using the equipment, stop. Do not continue until you have fixed the problem!
-
Wear appropriate clothing when using the equipment. Avoid loose clothing that could get caught in the equipment or restrict your movement.
– The equipment has been tested and certified according to EN ISO 20957-1 and EN ISO 20957-5, class H.C. It was designed for use at home and with a maximum user weight of 150 kg. -
This equipment is not suitable for tasks requiring high precision.
-
The braking system of this equipment is not something to be concerned about.
-
Be careful when lifting or moving equipment so as not to hurt your back! Use proper lifting techniques or, if necessary, ask for help.
-
Do not use accessories not recommended by the manufacturer.
-
Do not perform any adjustments or maintenance not specified in this manual. If you have any problems with the appliance, contact our technical service.
-
Replace all worn or defective parts immediately.
-
This bike does not operate without pedalling. You can stop the bike immediately by lifting or lowering the safety brake on the tension thread when exercising.
-
Adjust the handlebars and saddle according to the user’s needs. Please make sure that the threads are locked and that the saddle and handlebars are securely adjusted.
NOTE: In the event of improper use, FITFIU disclaims all liability for damage to property and personal injury.
PRODUCT DESCRIPTION
Technical features
Discover the passion for spinning with the BESP-150 indoor bike, designed to challenge your limits in intensive training sessions at home. This innovative indoor cycling bike will create a new sporting experience thanks to its technical features:
- TYPE OF RESISTANCE Friction
- FREQUENCY OF USE Intense
- SADDLE ADJUSTMENT Vertical and horizontal
- HANDLEBAR ADJUSTMENT Yes, 5 points
- PEDALS Non-slip pedals with fixing strap
Contents of the box
Assembly
Step by step
Open the box, remove the material inside the cardboard and place the main
frame on the floor. Remove the plastic block holding the flywheel.
Use the spanner to put the screws (12) into the washers (13). Then fix the rear Stabiliser (2) and the front Stabiliser (3) to the main frame (1).
Attention: The foot adjusters on the rear stabiliser (2) and front stabiliser (3) allow you to smoothly adjust the machine to the ground. The movable wheels on the sides of the front stabiliser (3) allow you to move the machine a short distance.
Insert the saddle post (4) into the main frame (1), and pull the adjustment knob (14) so that it automatically inserts into the corresponding hole in the saddle post (4). Secure the plastic saddle slider block (18) and saddle slider tube (5) to the saddle post (4) and secure them with the locking knob (15) and washer (16). Then place the saddle (6) on the seat sliding tube (5) and tighten and secure it with the double bit spanner (M13).
Note: You can loosen the knob (15) to adjust the position of the seat sliding tube (5) before and after adjusting it to the correct position, but be sure to tighten the knob (15) after adjustment. Pull the adjustment knob (14) to adjust the height of the saddle post (4), and after adjustment, secure the adjustment knobs (14).
Insert the handle adjustment tube (7) into the main frame (1) and pull the adjustment knob (14) so that it is automatically inserted into the corresponding hole of the handle adjustment tube (7). Note: Connect the sensor line (19) and (20).
Fix the handle bar (8) in the handle adjustment tube (7) with the nut (17) and tighten it with the spanner (M10).
Mount the monitor (9) on the handle bar monitor bracket (8). Then connect the sensor line (23) from the handle adjustment tube to the sensor line (21), and connect the pulse line (24) from the handle bar to the pulse line (25).
To identify the left pedal (10L), you will find a label L on both the left pedal and the left crank. First, remove the nut (11) from the left pedal, attach the left pedal to the left crank by turning counterclockwise and then replace the nut (11) you removed. To identify the right pedal (10R), look for the R label on both the right pedal and the right crank. First, remove the nut (11) from the right pedal, attach the right pedal to the right crank by turning clockwise and then replace the nut (11) you removed. Tighten completely using the spanner (M15) and the spanner (M19).
PRODUCT USE
Display
SPECIFICATIONS:
- TIME (TMR)………………………………………00:00 00 00-99:59 MIN
- SPEED (SPD)………………………………………0.0 0.0-99.9KM/H
- DISTANCE (DST)………………………………0.00 -99.999.99KM
- CALORIES (CAL)……………………………… 0-9999KCAL
- PULSE (PULSE)……………………………… 40 40-240BPM (Optional)
- Revolutions per minute (RPM) ………… 0-999 R/MIN
FUNCTION KEY:
- MODE: This key allows you to select and lock the desired function
OPERATION:
- The system turns on when any key is pressed or when it receives an input from the speed sensor.
- The processor automatically shuts down when the speed sensor has no input signal or no key is pressed for approximately 4 minutes.
- MODE: To choose SCAN or Lock if you do not want scan mode, press the MODE key when the pointer over the To choose SCAN or Lock if you do not want scan mode, press the MODE key when the pointer over the function you want starts to flash the function you want starts to flash the function you want starts to flash.
- TIME: Press the MODE key once the pointer advances to TIME. The total working time will be displayed.
- SPEED: Press the MODE key until the pointer advances to SPEED. Press the MODE key until the pointer advances to SPEED. The total working time will be displayed.
- DISTANCE: Press the MODE key until the display advances to DISTANCE. The distance of each workout will be displayed.
- PULSE: Press the MODE key until the pointer advances to PULSE. The user’s current heart rate will be displayed in beats per minute. Place palms of hands on both contact pads and wait 30 seconds for the most accurate reading.
- CALORIES: Press the MODE key until the pointer advances to CALORIES. Calories burned will be displayed.
- SCAN: Automatic display of the following functions in the order shown.
This monitor uses two “AAA” batteries. If the monitor does not display correctly, reinstall the battery for best results.
MAINTENANCE
General
The bike is adjusted and lubricated at the factory. It is not recommended that
the user should attempt to carry out any operations on the internal
components, for which you should contact the technical service department.
However, from time to time the external surfaces may appear dirty, follow the
instructions given to preserve their original condition.
- Metal surfaces should be cleaned with a soft cotton swab or a cloth with a little car wax. Do not use sprays, aerosols or pumps as they will leave wax residue on the screen surface.
- Occasionally, the screen surface will have finger marks or dust on it. The use of harsh chemicals will damage its protective coating and create static energy that will damage the components. This surface should be cleaned with special chemical preparations that are sold in computer shops and are especially for anti-static surfaces. We recommend the use of these products.
- The safety of the equipment is maintained if its condition, damage and wear are checked regularly.
- The bicycle must be moved and moved with care to avoid injury.
- The brake part is the part that wears out most easily. Before using the bike, check that the brake system is in good working order.
- Check that the fasteners are tightened securely.
- Carefully inspect the parts most susceptible to wear.
- Replace defective parts immediately.
- Keep the appliance out of service until it is repaired.
- Please check that all safety labels are in good condition and can be read. If any are missing or damaged, contact the dealer to order new ones.
GUARANTEE
This product is guaranteed for 3 years from the date of purchase. The warranty
covers breakdowns and malfunctions of components not considered as
consumables, provided that it is used in accordance with its intended use and
according to the instructions in the manual. In order to claim under the
warranty, proof of purchase (receipt or invoice) is required and the product
must be complete and with all its accessories.
The warranty clause does not cover deterioration caused by wear and tear, lack
of maintenance, negligence, incorrect assembly or improper use (knocks, non-
compliance with power supply advice, storage, conditions of use, etc.). The
consequences of the use of accessories or spare parts which are not original
or not suitable for the assembly or modification of the appliance are also
excluded from the guarantee.
for more information on the components covered by the warranty, visit the website www.fitfiu-fitness.com
DECLARATION OF CONFORMITY
We, BESELF BRANDS S.L., owners of the brand FITFIU FITNESS, with registered office at Blanquers Street, (plot 7-8) Polígono Industrial de Valls 43800 – Valls, SPAIN, declare that the indoor bike BESP-250 from serial number 2023 onwards, are in conformity with the requirements of the applicable European Parliament and Council Directives:
- EN 62479:2010 (Conformity assessment of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields.
- 2014/53/EU Radio Equipment Directive (RED)
- ETSI EN 301 489-1 V2.2.3 (2019-11)
- ETSI EN 301 489-17 V3.2.4 (2020-09)
- ETSI EN 300 328 V2.2.2.2 (2019-07)
The delivered product corresponds to the specimen which was subjected to EC type-examination. The essential requirements are therefore fulfilled on the basis of the technical specifications applicable at the time of issue.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>