tp-link Tapo C510W Outdoor Pan Tilt Security WiFi Camera User Guide

: June 13, 2024
: tp-link

Table of Contents

Set Up Your Camera
Mount Your Camera
Overhang Mount
Pole Mount
Appearance
Button Explanation
System LED Indication
Safety Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**tp-link Tapo C510W Outdoor Pan Tilt Security WiFi Camera User Guide

**

Set Up Your Camera

DOWNLOAD APP
Get the Tapo app from the App Store or Google Play.

Scan to download

POWER UP
Plug in the adapter to power up your camera.

SET UP
Tap the button in the app and select your model. Follow the app instructions to complete setup.

The camera is not waterproof when set on a table or shelf.
Mount the camera via Option 1, 2 or 3 when installing outdoors.

Mount Your Camera

Wall Mount

Affix the Camera and Bracket
Route the camera power cord through the opening of the bracket. Use two bracket screws to affix the bracket and the camera.
Drill Holes
Stick the mounting template to the desired mounting place. Drill four screw holes according to the template.
Mount the Camera
Insert four mounting anchors into the holes, then use the mounting screws to affix the camera and bracket over the anchors.
Connect to Power
Connect the camera to a power outlet using the provided power adapter. Install the waterproof seal for the power connectors.

Overhang Mount

Affix the Camera and Bracket
Route the camera power cord through the opening of the bracket. Use two bracket screws to affix the bracket and the camera.
Drill Holes
Stick the mounting template to the desired mounting place. Drill four screw holes according to the template.
Mount the Camera
Insert four mounting anchors into the holes, then use the mounting screws to affix the camera and bracket over the anchors.
Connect to Power
Connect the camera to a power outlet using the provided power adapter. Install the waterproof seal for the power connectors.

Pole Mount

Affix the Camera and Bracket
Route the camera power cord through the opening of the bracket. Use two bracket screws to affix the bracket and the camera.

Appearance

White Light LEDs
IR LEDs
Lens
System LED
Microphone
Reset
microSD Card Slot’
Speaker
DC Power Connector

Button Explanation

Reset Button
Loosen the screws. While the camera is powered on, use a pin to press and hold the RESET button for at least 5 seconds until the System LED blinks red. The camera will reset and reboot.

microSD Card Slot
Loosen the screws and insert a microSD card. Initialize it on the Tapo app for local recording. microSD card not included.

DC Power Connector
Used to connect to a 12V DC power adapter

System LED Indication

Solid red	Starting up
Blinking red and green	Ready for setup
Blinking red slowly	Connecting to Wi-Fi
Solid amber	Connected to Wi-Fi
Solid green	Connected to the cloud
Blinking red quickly	Camera resetting
Blinking green quickly	Camera updating

Safety Information

Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Do not use the device where wireless devices are not allowed.
Adapter shall be easily accessible.
Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
Do not disassemble, repair or modify the product.
Do not use the product if the casing has been broken. Danger of electric shock.
Never touch the product with wet hands.
Do not place near automatically controlled devices such as fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.
Do not use liquid to clean the product. Only use a dry cloth.
Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorised electrician.
This product is not intended to be used when providing medical care. Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids to determine if they are adequality shielded from external RF (radio frequency) energy
Do not use this product in health care facilities. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Do not place heavy objects on top of the product.
When you leave the product unused for a long time unplug the product from the power outlet.
This product may interfere with other electronic products such as TV, radios, personal computers, phones or other wireless devices.
Adapter should be used indoors where the ambient temperature is lower than or equal to 40 ºC.
Operating Temperature: -30 ºC ~ 60 ºC (-22 °F ~ 140 °F ) Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tapo.com/support/ce

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/

Symbols