S-IDEE 16207 1:16 RC High Speed Car User Manual

S-IDEE 16207 1:16 RC High Speed Car

Product Information

• Product Name: 1:16 RC High Speed Car
• Model Number: 16207
• Manufacturer: Made in China

Features:

• RC Electric Model with Electric Motor
• High Speed Performance
• 2.4 GHz Frequency
• Powered by a 11.1V / 1050mAh 25C Battery Pack
• Remote Control Powered by 2 x AA 1.5V Batteries (not included)

Package Contents

• 1:16 RC High Speed Car
• User Manual

Technical Specifications

• Model Classification: RC Electric Model with Electric Motor
• Frequency: 2.4 GHz
• Motor: Electric Motor
• Power Supply for Remote Control: 2 x AA 1.5V Batteries (not included)
• Power Supply for Car: 11.1V / 1050mAh 25C Battery Pack

Product Usage Instructions

1. Read the user manual carefully before using the product.
2. Ensure that the batteries are inserted correctly in the remote control.
3. Install the rear part of the car body and secure it with 2 screws.
4. Insert the battery into the car and charge it using a separate 5V2A adapter (not included).
5. Turn on the power switch of the car.
6. Pair the remote control with the car by following the frequency pairing instructions.
7. Use the remote control to control the car’s movement.
8. To turn left, press the left turn button on the remote control.
9. To turn right, press the right turn button on the remote control.
10. To stop the car, press the middle button on the remote control.
11. Ensure that the antenna of the remote control is vertically aligned.
12. Follow the safety precautions mentioned in the user manual to prevent accidents or damage.

RC HIGH SPEED CAR

• Dear Customer: Thank you for purchasing this product.
• Please read the user manual carefully before using the product.
• Keep the user manual for future reference.
• The instruction sheet for this product is just for your reference. We reserve the right to make changes or adjustments on the product without prior notification.
• Please refer to the official information.

Warning:

• Choking hazard! This product contains small parts. NOT suitable for children under 3 years. Contains electrical components and should be kept dry at all times.
• Regularly check the battery charger wires, plugs and shell and other components for damage.
• DO  NOT use if any part is damaged.

Warnings & Cautions

1. Detachable small parts should be stored safely and out of reach of children.
2. If interference is experienced, turn the model off and try it again in a different area.
3. Transmitter will not function correctly if the batteries are low. Please replace the batteries.
4. Please discard old/used batteries in a safe manner. Consider your environment!
5. Please store the remote control model in cool, dry place.
6. DO NOT expose to fire or high temperatures, do not store in moist place.
7. Once the battery get wet, wipe immediately with a soft dry cloth. If the battery have any deformation, please stop using.
8. If you don’t use the model for a long time, please raise the chassis to let the wheels hang in the air.

Precautions for Battery Use

1. Transmitter uses 2×1.5V “AA” batteries.
2. Please pay attention to correct polarity when replacing batteries.
3. Rechargeable batteries should be charged under adult supervision.
4. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
5. After the battery is exhausted, it should be removed from the model.
6. Exhaust battery should be safety dispose!
7. DO NOT short circuit any terminals.
8. DO NOT attempt to recharge non rechargeable batteries.
9. Remove batteries from the model when charging.
10. DO NOT put batteries into a fire or into water.
11. The rated input voltage battery charger MUST be suitable for your mains power voltage.
12. During charging it is quite normal for the charger and batteries to heat up.
13. Do not swallow battery!
14. Store only in cool, dry and dark places and should be keep out of the children!
15. When the battery leaks the liquid and let it into you eyes, please right away rinse them and consult an ophthalmologist.

Safety Precautions

• It is a radio control model, not a toy!
• In order to enjoy running the car, you need to finish assembly before operation. Do routine maintenance work after operation. Replacement parts and option parts are available separately.
• Improper usage with Alkaline cells or rechargeable batteries may damage the electronics for the car or the radio.

In order to operate the car safely. Be sure that you have observed the following points:

• Please follow the points as below in order to prevent accident from happening to the car and people.
• Be sure to read thoroughly the manual before you begin. Fresh user should seek advice from people having rich experience in order to assemble the model correctly.
• Cutters, nippers and screwdrivers need careful handling.
• As the product contains small and sharp parts, assemble and store this product only in places out of the reach of children.
• Do not expose this model to high temperature, humidity or direct sunlight.
• Never reverse connection/ disassemble the battery. This may lead to damage and leakage.
• When the model is not in use, always turn off the receiver and transmitter. Further more, disconnect the batteries and remove them from the model and the transmitter. This may be dangerous such as overheat and leakage.

Operating Your Model Safely

Do NOT operate the model in the following places and situations. (Non- observance may lead to accident!)

• Operate your model in spacious and safe areas! Do not operate it:

1. On road!
2. In places where children and many people gather.
3. In residential districts and parks!
4. Do not operate the model on public roads, in crowded places and near infant as it may cause accidents.
5. Indoors and in limited space! Non-observance may result in personal injury and property damage!

•  The car must stop immediately and check for the reasons when it is operating abnormal.
• As long as the problem is not cleared, do NOT operate it! This may lead to further trouble and unforeseen accidents!
• Always check the radio batteries!
• With weak dry batteries, transmission and reception of the radio would fall off. You may lose control of your model in such condition. This may also cause serious accidents!
• Keep in mind that people around you may also operate a radio control model!
• NEVER share the same frequency with somebody else at the same time! Otherwise, Radio signals will be mixed up and you will lose control to your model. This may lead to accidents.
• Do NOT put fingers or any objects inside rotating and moving parts!
• Right after use, do NOT touch the motor! Danger of burning yourself!

FCC

PART 15 B Notice: CAUTION

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

Power Switch

1. Turn on the power switch of the transmitter, the signal indicator light of transmitter flashes.
2. Press the power button of high speed car, which is on the side of the ESC; the indicator light of high speed car flashes.
3. When the indicator light stays on, the high speed car can be operated to play.

• When turn on the transmitter, please DO NOT touch the throttle and steering. After turn on the transmitter’s power, please operate after the indicator light of transmitter staying on.
• Please comply the principle of “turn on the transmitter firstly, then turn on the high speed car’’.
• In the frequency matching, please make sure there is only one pair of transmitter and high speed car in matching at the same time, otherwise the frequency will match wrongly.

R30 Receiver

Warning: Please make sure the connection is correct.

E45A Brushless ESC

Please Do Not forcible/reversely insert all sockets.

Flash quickly

| a.  No signal

b.  Pull the trigger

Flash slowly| Low voltage

Flash twice

| Over heat protection
Off| Stuck protection

• VCC: Powered by battery circuit. Please provide the same voltage as the connected battery.
• It can be used as cooling fan power.
• Please make sure the battery voltage of the ESC is in the range of fan’s.
• BVD: Receivers with BVD function can be directly connected to this interface through an adapter cable, which is equivalent to connecting a battery.

T3B Transmitter

1. ST.TRIM (Steering servo strimmer)
2. TH.TRIM (Throttle trimmer)
3. Power switch (OFF-70%TH-100%TH)
4. Indicator light
5. CH1: ST (Steering)
6. CH2: TH (Throttle)
7. CH3: Fn

• ST.TRIM (Steering servo strimmer)
  • If the car cannot go straightly during driving, it can be adjusted through the ST.TRIM.
• TH.TRIM (Throttle trimmer)
  • If the car can’t be stop when the TH in the middle place, you can adjust the button to stop the car.
• Power/Speed switch

Indicator light

CH1: ST (Steering)

CH2: TH (Throttle)

• Brake: When the car is going forward, pull the transmitter trigger back, and the car enters into the braking state. After the trigger is in the middle, push back again, and the car can move backward.
• When the car is in reverse situation, it does not the brake function.

Install the Head Wheels

• Fix the head wheels into the rear of the car via 3 screws.

Install the Tail

• Install the tail to the body, lock with 2 screws.

Install the Transmitter’s Battery

• Open the transmitter’s battery cover, insert 2 AA batteries according to the indicated positive and negative direction, close the battery cover.

Install Battery and Charge Battery

Install the battery

1. Turn the battery lock knob and flip up the cover;
2. Connect the receiver plug to the battery;
3. Put the battery into the battery holder and make sure it is in place;
4. Flip back the cover and turn the knob to lock it.

Charge

• High speed car battery: 11.1V 1050mAh 25C.
• If charging with a 5V 2A USB adapter, the charging time is about 240 minutes
• When charging, the indicator light of charger is green and flashes;
• When the battery is fully charged, the green indicator light of the charger stays on.
• The above charging time data is based on the test result of 5V 2A adapter. Using different specifications of adapters or power supply equipment will affect the actual charging time. It is recommended to use a 5V2A adapter for charging.

Install Car Shell

1. Aline the 3 holes of the car shell with holders, then install it.
2. Insert the 3 clips into the holes to lock the car body.

References

• Klaus Maassen – Von Berufs wegen Mensch. Privat auch.
• s-idee® | Hersteller und Großhändler von RC Produkten
• s-idee® | Hersteller und Großhändler von RC Produkten

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>