VIVITAR V80013 True Wireless Speaker User Manual

VIVITAR V80013 True Wireless Speaker

Product Information

The V80013 Speaker is a portable wireless speaker that provides high-quality sound and various features for an enhanced audio experience. It comes with a built-in TF card slot, RGB light function, and a control panel for easy operation. The speaker also supports TWS (True Wireless Stereo) pairing, allowing you to connect two speakers for a stereo sound setup.

Product Usage Instructions

1. Take the V80013 Speaker out of the box.
2. Slide the power switch to the “ON” position to power on the speaker. The blue LED light will flash quickly.
3. On your phone, go to the Bluetooth settings page in the Settings app and ensure that Bluetooth is turned on.
4. Select the available device named “V80013 Speaker” to establish a Bluetooth connection.
5. To control the volume, use the volume up (+) and volume down (-) buttons on the top control panel.
6. To play/pause audio, press the play/pause button on the top control panel.
7. To skip to the next or previous track, use the next track and previous track buttons on the top control panel.
8. To activate TWS pairing mode and connect two speakers for stereo sound, press the TWS pairing button.
9. To change the RGB light mode, press the RGB light button on the top control panel. There are 6 different light modes to choose from.
10. To charge the speaker, follow these steps:
    • Insert the included charging cable’s USB-C end into the charging port on the back control panel of the speaker.
    • Insert the charging cable’s standard USB end into a USB port on a computer or a suitable wall adapter (not included).

Note: For additional information or assistance, consult the dealer or an experienced radio/TV technician.

Specifications

• Bluetooth Range: Up to 33 feet (10 meters)
• Charging Input: DC5V 0.15A max
• Play Time: 2. 5 Hours
• Applicable at 50% of maximum volume.
• Results will be lower when volume is higher.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under license. Other trademarks and trade names are those of their respective owners.

Buttons and Parts

Top Control Panel

Back Control Panel

Charging

1. Insert the included charging cable’ s USB-C end into the charging port on the case.
2. Insert the charging cable’ s standard USB end into the USB port of a computer or suitable wall adapter (not included).
3. The LED Charging Indicator Light will flash while the case is charging and will emit a steady light when fully charged.

Bluetooth Pairing

1. Take the unit out of box
2. SLIDE TO ON TO POWER ON THE SPEAKER lue led light flash quickly.After successfully paired, the light will not flash
3. On your phone, go in the Bluetooth page in the Settings app. Make sure Bluetooth is on before connecting to the available device “V80013 Speaker”.

NOTES

1. The speaker will automatically be paired with your last successfully connected media device the next time it is turned on.
2. Press and hold the / TWS button for 2 seconds to unpair or re-pair the speaker.
3. If there is no Bluetooth connection on the speaker for more than 5 minutes, it will automatically turn off.

True Wireless Stereo connection

• The CSTW52FD supports True Wireless Pairing, which lets you.

Using Your Earbuds

Using Your Earbuds: Music Controls

1. 6 kind of light mode for choosing
2. Activate the Bluetooth® feature on your phone, and set the phone to search for wireless devices (See the User Manual for your device) The speaker will show on your device as BB-BT-SP. (if passcode is requested enter 0000) A voice prompt will signal that the connection is successful. If not paired, the speaker will turn off automaticallv after 8 minutes.
3. Press the Play/ Pause button to play/ pause your device’s music.
4. Short press the “+” button to go to the next song or long press the “+” button to turn the volume up.
5. Short press the “-” button to go to the last song or long press the”_” button to turn the volume down.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may causeundesired operation.

FCC warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>