BONOLA TEC01 Cooling Magnetic Wireless Charger User Manual

BONOLA TEC01 Cooling Magnetic Wireless Charger

Product Information

MagSafe cases
Type-C Input| 5V/3A, 9V/2.22A
Wireless Output| (SW), (7.5W), (lOW)
Charging Efficiency| ~50%
Product Size| 85×110 mm

Product Usage Instructions

1. Connect the air vent clamp to the device.
2. Attach the clamp to the car vent:
3. Loosen the nut to make the hook stretch out to the right length and place the hook clip on the car’s vent.
4. Unscrew the nut and place it around the ball head, insert into socket, then tighten the nut clockwise.
5. Tighten the nut so that the hook retracts to catch the vent blade until the grip securely locks onto your car’s vent.
6. Connect power to the charger using the Type-C cable packed in the box.
7. To charge your iPhone, fit the product with the back of your iPhone. It will charge your iPhone automatically via the built-in magnetic wireless charging.

Note: Under normal charging conditions, the charger and mobile phone could be slightly hot. The temperature may rise if the mobile phone is working while charging (such as playing video). Please stop charging your phone when the charger is over-heating. Our product will automatically stop charging when over-heating. Please try it again when it’s cooling down.

Tips: When using this product, please make sure that the product is connected to power. To achieve fast charging, a QC2.0/3.0 car charger is required.

Precautions

• Fits Below Supports (Not Included) Ball Diameter: 16.8 ± 0.3mm

Included in the Box

• User manual x 1
• Charger x 1
• AirVent Clamp x 1
• USB-A to Type-C Cable x 1

FCC Statement

The device has been evaluated to meet general RF exposure requirements. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Only fits for iPhone 12/13/14 series or smart phones with MagSafe cases.
Note: For best perfonnance and safety, please read this manual carefully before using the product.

Product Diagram

User Instruction

1. Connect the air vent clamp to the device;
2. Unscrew nut
3. Place nut around ball head, insert into socket
4. Tighten nut clockwise
5. Attach clamp to car vent
   • Step 1: Loose the nut to make the hook stretch out the right length ‘a and place the hook clip on car’s vent
   • Step 2: Tighten the nut so that the hook retracts to catch the vent balde until the grip securely locks onto your car’s vent
6. Connected Power To Charger****  

Use the Type-C cable packed in the box to connect the device and the car charger.
Tips:
When using this product, please make sure that the product is connected to the power. To achieve fast charging, QC2.0/3.0 car charger is required

4. Charging your iPhone
   Please fit the product with the back of your iPhone, it will charge your iPhone automatically via the built-in magnetic wireless charging, Max to be lOW.

Notes

• Under normal charging conditions, the charger and mobile phone could be slightly hot; the temperature may rise if the mobile phone is working while charging (such as playing video)
• Please stop charging your phone when the charger is over-heating.
  Our product will automatically stop charging when over-heating. Please try it again when it’s cooling down.

Precautions

• Please carefully handle your charger and accessories, the following recommendations will help you effectively use the warranty service.
• Please keep the equipment dry. Rain, moisture and various liquid may contain minerals that will corrode the circuit. If the equipment is wet, please dry the product as soon as possible or use a soft cloth to wipe it clean.losing the data stored due to demagnetization.
• When charging, please select the regular 5V/2A, 9V/2A chargers. Do not use any damaged chargers.
• Please do not attempt to charge the equipment with exposed or case broken, and do not charge the equipment that are incompatible with this product.
• Do not store the equipment in a cold place. Otherwise, if temperature rises to normal temperature, moisture will pent up inside it and damage the electric appliance.
• Do not attempt to open the equipment, unauthorized dis-assembly or modification will damage equipment or related wireless charging functions.
• Do not throw, tap or shake the equipment; rough handling of the equipment will damage the internal circuit board and the mechanical structure
• Use the clean and moist soft cloth to clean the surface of the equipment. Do not use or store the equipment in dusty or dirty places.
• Some components of this product are magnetic and metal materials may be adsorbed onto this product. Please do not use bank cards, credit cards or any other items with magnetic near the product so as to avoid losing the data stored due to demagnetization.

Fits Below Supports (Not Included)

Ball Diameter: 16.8士0.3mm

Specifications

• Input 5V/3A, 9V/2.22A
• Wireless Output (SW), (7.5W), (lOW)
• Charging Efficiency:.so%
• Product Size (2l 58.5’43.8 mm

In the box

FCC Statement

• This device complies with Part 15 of the FCC Rules. Operation is subject lo the following two conditions:
  1. This device may not cause harmful interference
  2. This device must accept any interference received, including interference that may cause undesired operation.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed lo provide reasonable protection against harmful interference in a residential installation
• This equipment of generates uses and can radiate radio frequencies energy and, if not installed and used in accordance with the 1nslructions,may cause harmful interference to radio communications. However, There is no guarantee the interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of 1he following measures
  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and receiver
  • Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer of an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirement, This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>