Little Piggy 76 Projects Versatile on Bike Storage Instruction Manual
- June 13, 2024
- Little Piggy
Table of Contents
Little Piggy 76 Projects Versatile on Bike Storage
Use a 3mm allen key to tighten supplied screws through slots.
STRAP MOUNT
-
SILICONE PADS
Use a large flat head screw driver to gently push pads into slots. -
INSERT COATED STRAP insert strap from the underside as shown
-
ATTACH TO BIKE
Wrap strap around frame and insert into buckle.
Apply pressure to platform, pull strap tight and close up velcro.
USING STRAP
Use the supplied tool band to hold tube and tools together
ADJUST CAPACITY
Open out the strap.
Pull each end to suit contents.
ALIGN STRAP
Thread strap through slot.
Align ‘HOOK’ velcro with edge of the slot.
TENSION STRAP
To ensure stability of contents keep constant tension of strap when wrapping
over contents. This will remove any slack.
COVER UP
Velcro should be completely covered to prevent mud and dirt clogging it up.
CARE INFO
- Periodically check screws and tighten if necessary.
- Clean frame before attaching strap mount. Consider using frame protector tape if riding in extreme conditions.
- Strap may be cleaned, using clean soapy water and allowed to drip dry only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>