Style SELECTIONS FSI 1475E BNIC Florine 28-in to 48-in Brushed Nickel Steel Single Curtain Rod Instruction Manual
- June 13, 2024
- Style SELECTIONS
Table of Contents
Style SELECTIONS FSI 1475E BNIC Florine 28-in to 48-in Brushed Nickel
Steel Single Curtain Rod
STYLE SELECTIONS and logo design are trademarks or registered trademarks of LF, LLC. All rights reserv
Thank you for purchasing this Style Selections product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product in-stead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 877-888-8225, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 30 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
- Visit lowes.com for more information
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
-
Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws.
-
Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors
NOTE: Anchors are not needed for all installation types. -
Attach the adjustable bracket to the wall using the screws provided. Next adjust the bracket distance out from the wall as desired and tighten with screws provided.
NOTE: Repeat steps 1 to 3 for additional brackets. Use level (not included) if necessary -
Fit drape(s) (not included) on rod.
28-48-in Drapery Rods/Varillas para cortinas de 71.12 cm a 121.92 cm -
Fit the rod, with drapes (not included), on the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure. 48-84-in Drapery Rods/ Varillas para cortinas de 121.92 cm a 213.36 cm
-
Fit the rod, with drapes (not included), on the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Drapery rod not level. | Drapery hooks not installed correctly. |
| Make sure to use level (not included) during installation.
Drapery rod hook is loose.| Drapery hooks not anchored correctly.| Attach drapery hooks to wall studs if possible. Use anchors and screws supplied if you can’t attach to stud.
CARE AND MAINTENANCE
- Clean with a soft cloth.
- Do not use abrasive cleaning agents, solvents or polishes as they may damage the finish.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>