COAST Products CL20R Clamp Light Instruction Manual
- June 13, 2024
- COAST Products
Table of Contents
COAST Products CL20R Clamp Light
INSTRUCTIONS: COAST CL2OR CLAMP LIGHT
CLAMP LIGHT CONSTRUCTION
The CL20R light body is composed of a COAST-engineered resin with four
protective thermoplastic resin bumpers at each of the Clamp Light’s four
corners. The clamp is made from heavy-duty nylon, and its primary attachment
point is coated with a synthetic rubber padding for superior grip and added
protection.
USING THE CLAMP LIGHT
The CL20R is designed with COAST’s Wide Angle Flood Beam featuring three
brightness settings. Use the Power Button to turn on the CL20R, as well as
cycle through low, medium, and high settings, in that order.
DIRECTING THE BEAM
The CL20R is mounted to the clamp on a swiveling ball, allowing full
360-degree rotation of the Clamp Light. To adjust the direction of the beam,
lift the Clamp Light from the stowed position. Swivel the Clamp Light until
the Wide Angle Flood Beam is aimed in the desired direction. While the CL20R
is in the stowed position, the clamp handles also function as a vertical stand
for the Clamp Light.
MOUNTING THE CLAMP LIGHT
The CL20R is equipped with a padded spring clamp, as well as four powerful
embedded magnets for hands-free use. To attach the Clamp Light to an object
using the clamp, grasp the clamp handles and squeeze together to open the
jaws. The clamp is tensioned by a pair of powerful steel springs, and it may
require both hands to open. Once the jaws of the clamp are open, place them
around a solid object and slowly release tension on the handles until the jaws
have a firm grasp on the object. The primary contact points on the jaws are
fitted with synthetic rubber pads, which should prevent the marring of most
objects the clamp is affixed to.
To mount the CL20R using the embedded magnets, simply place the base of the
Clamp
Light on a magnetic surface.
CHARGING THE BATTERY
The CL20R is powered by an integrated COAST ZITHION™ Rechargeable Battery. To
charge the battery, lift the port cover and plug the COAST Charging Cable
(included) into the USB-C Power Input Port. Then plug in the cable at an
available power source.
Monitor charging progress, as well as available power of the CL20R using the Battery Life Indicator, located on the back of the Clamp Light. While the CL20R is plugged into a power source, one of the four panels on the Battery Life Indicator will flash green indicating that the battery is actively charging and the current level of battery life. Each solid green panel on the Battery Life Indicator represents 25% of the available battery life. Once all four panels are solid green, the battery is fully charged. When the CL20R reaches its lowest power limits, the Wide Angle Flood Beam and the final power panel on the Battery Life Indicator will begin to flash, indicating that the battery mush be charged immediately.
CONTINUOUS RUN
In addition to the ZITHION™ Rechargeable Battery, the CL20R can also be
continuously run using standard AC/ DC power. To continuously run the Clamp
Light, plug the USB-C Cable (included) into the CL20R and plug the cable into
an available power source, Then turn on the Clamp Light.
While in continuous run, the CL20R Clamp Light will operate at a single
setting at a reduced level.
The Clamp Light will not charge while in continuous run mode. The light must
be turned off and not in use in order to fully charge.
EXTERNAL PORTABLE CHARGING
The CL20R is equipped with a USB-A Power Output Port, and can also function as
a portable power bank for USB devices. To charge a USB device, plug the
device’s charging cable into the USB-A Power Output Port, located on the back
of the Clamp Light. Then plug in the device. While the device is charging, the
Battery Life Indicator on the CL20R will light up and remain illuminated.
Note: The CL20R light does not need to be turned on to charge USB devices.
WARRANTY
COAST’s Lifetime Warranty stands firm behind your product, providing you the
assurance that COAST knives, tools, flashlights and headlamps, are warran-tied
against defects in workmanship for the life of the product as long as the
original purchaser owns the product for a maximum of 100 years. Any problem at
all? Just let us know-we’ll repair or replace your product. Proof of purchase
is required to claim this warranty. Please understand this warranty does not
cover normal wear and tear, nor damage resulting from misuse or neglect. The
warranty also does not cover batteries and charging accessories (or damage
caused by either). Batteries or damage caused by batteries (i.e. leakage) are
also not included in the Warranty. Warranty ex-changes do not cover the cost
of shipping and handling.
Visit www.COASTportland.com/warranty
for more information.
CAUTION
The CL20R is compatible with the integrated COAST ZITHION™ Rechargeable
Battery only. Do not attempt to remove the Rechargeable Battery from the
CL20R.
Never submerge the CL20R in any liquid.
Note: This Warranty is not valid for items purchased in Mexico. For
warranty information
specific to Mexico, please refer to the separate warranty sheet found in your
package or visitwww.coastportland.com/warranty.
INSTRUCTIONS: COAST CL2PR
COAST ZITHION™ RECHARGEABLE BATTERY OR CONTINUOUS RUN
USB-C CHARGING CABLE (INCLUDED)
|
1
| WIDE ANGLE FLOOD BEAM WITH POLYCARBONATE COVER
---|---|---
2
| HIGH IMPACT TPR CORNER PROTECTION
3
| MAGNETIC BASE
4
| PADDED NYLON CLA M P WITH STEEL SPRING CONSTRUCTION
5
| 115 ° BEAM TILT
6
| 360 ° LIGHT ROTATION
7
| USB-A POWER OUTPUT
8
| USB-C POWER INPUT
9
| BATTERY CHARGE INDICATOR
10
| POWER BUTTON
WARNING
You must read and understand the following warnings and instructions before
using this product. Failure to follow them could result in serious injury,
including burns, or property damage.
WARNING-HOT SURFACE
Burn Hazard. Do not touch lens or light surface until adequately cooled.
The lens and surrounding light surface achieve high temperatures while the
light is on and even after it is off. Keep at a safe distance from the lens
and surrounding light surface until adequately cooled, which usually does not
occur until at least 5 minutes after the light has been off.
WARNING-KEEP AT SAFE DISTANCE
Burn Hazard. Keep at a Safe Distance (0.1 meters or 0.3 feet) from the lens
and light to avoid hot surface.
The lens and surrounding light surface achieve high temperatures while the
light is on and even after it is off. The lens and surrounding light surface
should not be touched until adequately cooled, which usually does not occur
until at least 5 minutes after the light has been off.
COAST INTERNATIONAL DISTRIBUTORS
EU
Lakuda ApS
Spettru pvej 1
Hedensted 8722
Denmark
info@lakuda.dk
SPAIN/FRANCE/PORTUGAL
FEGEMU SB, S.L.
B75009316
C/APOSTOLADO, 34
20014 SAN SEBASTIAN
GIPUZKOA (SPAIN)
info.fegemu@fegemu.com
UK/REPUBLIC OF IRELAND/
BELGIUM/NETHERLANDS/LUXEMBOURG
BBB INVESTMENTS LTD
Unit A3, Harrison Road
Airfield Business Park
Market Marlborough
Leicestershire, LE16 UL
U~1ted Kingdom
le1sure@coast-torches.co.uk
AUSTRALIA/NEW ZEALAND
White International
60 Ashford Ave Milleara NSW, 2214
tradesales@whiteint.com.au
MEXICO
RIMARWEN TRADING COMPANY S.A. DE C.V.
Av. Roble #300 Suite 708 Col. Valle Del Campestre
San Pedro, Garza Garcia, Nuevo Leon, Mexico
CP:66265
servicio@rimarwen.com
Documents / Resources
|
COAST Products CL20R Clamp
Light
[pdf] Instruction Manual
22-370v02A, 2206A, CL20R, CL20R Clamp Light, Clamp Light, Light
---|---