Arlux 200438 Extra Flat LED Construction Projector Instructions
- June 13, 2024
- Arlux
Table of Contents
Arlux 200438 Extra Flat LED Construction Projector
Product Information
- Product Name: SERIE_XR
- Model Numbers: 3297022004360, 3297022004384, 3297022004407
- Power Output: 10W, 20W, 30W
- Sound Pressure Level: > 70
- IP Rating: IP 54
- Dimensions (cm):
- Model 3297022004360: 26×19.5×16.8
- Model 3297022004384: 26x23x16.8
- Model 3297022004407: 29×26.5×16.8
Product Usage Instructions
- Connect the power source to the SERIE_XR speaker.
- Turn on the power switch located on the speaker.
- Adjust the volume level according to your preference.
- To pair the speaker with a Bluetooth device, activate the Bluetooth function on your device and search for available devices.
- Select “SERIE_XR” from the list of available devices to establish a connection.
- Once connected, you can play audio from your Bluetooth device through the speaker.
- Use the buttons or controls on your Bluetooth device to adjust the playback settings (e.g., play, pause, skip).
- To use the speaker with a non-Bluetooth device, connect it using the provided audio cable.
- Insert one end of the audio cable into the AUX input on the speaker and the other end into the headphone jack of your device.
- Adjust the volume level on both the speaker and your device to achieve the desired sound level.
- To charge the built-in battery, connect the included charging cable to the charging port on the speaker and plug it into a power source.
- The LED indicator will show the charging status, and it will turn off once the battery is fully charged.
- When not in use, turn off the power switch and disconnect the speaker from the power source to conserve battery life.
- Keep the speaker away from water or moisture to prevent damage to the internal components.
- Refer to the user manual for more detailed instructions and troubleshooting tips.
Note: The product information and usage instructions provided above are based on the given text extract from the user manual. For complete and accurate information, please refer to the original user manual included with the product.
Instructions for use
| | CRI| | |
---|---|---|---|---|---
3297022004360| 10W| > 70| IP 54| | 26×19,5×16,8 cm
3297022004384| 20W| > 70| IP 54| 3,7V| 26x23x16,8 cm
3297022004407| 30W| > 70| IP 54| 7,4V| 29×26,5×16,8 cm
- Electrical products must not be thrown out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal in accordance with local regulations Contact your local authorities or stockiest for advice on recycling.
- Batteries must be recycled or disposed of in an appropriate manner. Do not dispose of batteries in household garbage, municipal waste or on fire, as they may leak or explode.
- Do not open, short circuit, or damage the batteries, as this may cause injury.
- Product conforms to European Union Directives
- User replaceable light source (LED only)
- User replaceable power supply
General safety instructions
- Check that the product is not damaged before handling. Switch off the product before handling. Do not cover the product
- Regularly clean the product using a soft, slightly damp, lint-free cloth. Do not use solvents.
- Before first use, fully charge the battery. Do not leave the charger plugged in indefinitely after the battery has been fully charged.
- Do not use or dispose of the product in water or any other liquid.
- Do not look directly at the light source.
- The battery of this product is replaceable.
- Use only the supplied or recommended battery. Attempting to use another battery pack will damage the product and may cause an explosion, fire, or injury.
- Only use the charger supplied with this product to charge the battery.
- Do not use another charger with different technical characteristics.
- Use of other chargers may cause explosion, fire, or injury.
- Batteries should not be opened, destroyed or incinerated as they may leak or rupture and release toxic gases and chemical compounds.
- Do not throw into fire. Do not expose the batteries close to heat sources.
- Do not store the product in a damp or wet place, or in a place where the temperature is likely to reach or exceed 40°C. For
Battery replaceable
INSTALLATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>