Bio Instruments FI-x-PT Fruit Growth Sensors User Guide
- June 13, 2024
- Bio Instruments
Table of Contents
Bio Instruments FI-x-PT Fruit Growth Sensors
Fruit Growth Sensors Quick Start Guide
www.phyto-sensor.com
Introduction
A PT-series of the FI-type absolute displacement sensors provides recording
both size and growth rate of intact rounded (like tomato and apple) and oblong
(like cucumber and banana) fruits in three diameter ranges within 7 to 160 mm.
Original parallelogram design of moving arms provides firm and straight
positioning of the sensor on a fruit under study. The PT-series sensor has a
built-in precision displacement transducer with a miniature DC-powered signal
conditioner.
Installation
- Choose a fruit for attaching the sensor.
- Move clamping jaws apart so as the sensor can hold the fruit in the desired position.
- Check if the sensor holds the fruit firmly and cannot easily slide down with application of gentle force.
- Secure the sensor’s cable on a stem to prevent occasional movement of the sensor.
- Check the position of the sensor regularly.
Connection
The connection table:
| Pin | Color | Description |
|---|---|---|
| 1 | Black | Ground |
| 2 | White | Output 0 to 2.4 Vdc |
| 3 | Red | Power 2.8 to 16 Vdc @ 1mA typ. |
Power supply
The PT-series sensors are to be powered from an external regulated power
supply with 2.8 to 16 Vdc @ 1mA typ. output voltage.
Calibration table
| U, Volts | FIS-PT, mm | FIM-PT, mm | FIL-PT, mm |
|---|---|---|---|
| 0.0 | 7.00 | 15.00 | 30.00 |
| 0.6 | 15.50 | 33.75 | 62.50 |
| 1.2 | 26.00 | 52.50 | 95.00 |
| 1.8 | 35.50 | 71.25 | 127.50 |
| 2.4 | 45.00 | 90.00 | 160.00 |
Calibration equations
where: D — measured diameter, mm U — output voltage, V
Specifications
| Measurement range | FIS-PT | FIM-PT | FIL-PT |
|---|---|---|---|
| Temperature effect | Output Excitation time Supply voltage Current consumption | ||
| Operating temperature Protection index Cable length | IP64 | 5 m |
Customer Support
If you ever need assistance with your sensor, or if you just have questions
or feedback, please e-mail at support@phyto-sensor.com. Please include as part of your message your name, address, phone,
and fax number along with a description of your problem.
Bio Instruments S.R.L. 20 Padurii St., Chisinau MD-2002 REPUBLIC OF MOLDOVA Tel.: +373-22-550026 info@phyto-sensor.com www.phyto-sensor.com
Introduction
A PT-series of the FI-type absolute displacement sensors provides recording both size and growth rate of intact rounded (like tomato and apple) and oblong (like cucumber and banana) fruits in three diameter ranges within 7 to 160 mm. Original parallelogram design of moving arms provides firm and straight positioning of the sensor on a fruit under study. The PT-series sensor has a built-in precision displacement transducer with a miniature DC-powered signal conditioner.
Installation
- Choose a fruit for attaching the sensor.
- Move clamping jaws apart so as the sensor can hold the fruit in the desired position.
- Check if the sensor holds the fruit firmly and cannot easily slide down with application of gentle force.
- Secure the sensor’s cable on a stem to prevent occasional movement of the sensor.
- Check the position of the sensor regularly.
Connection
The connection table:
- Black: Ground
- White: Output 0 to 2.4 Vdc
- Red: Power 2.8 to 16 Vdc @ 1mA typ.
Power supply
The PT-series sensors are to be powered from an external regulated power
supply with 2.8 to 16 Vdc @ 1mA typ. output voltage.
Calibration table
U, Volts| FI‑S-PT, mm| FI‑M-PT, mm| FI‑L-PT,
mm
---|---|---|---
0.0| 7.00| 15.00| 30.00
0.6| 15.50| 33.75| 62.50
1.2| 26.00| 52.50| 95.00
1.8| 35.50| 71.25| 127.50
2.4| 45.00| 90.00| 160.00
Calibration equations
-
D = 15.8(3) × U + 7 (FI-S-PT)
-
D = 31.25 × U + 15 (FI-M-PT)
-
D = 54.1(6) × U + 30 (FI-L-PT)
where:- _ D: _measured diameter, mm
- _ U: _output voltage, V
Specifications
| Measurement range | FI‑S-PT | 7 to 45 mm |
|---|---|---|
| FI‑M-PT | 15 to 90 mm | |
| FI‑L-PT | 30 to 160 mm | |
| Temperature effect | < 200 ppm FS/°C | |
| Output | 0 to 2.4 Vdc | |
| Excitation time | 25 ms | |
| Supply voltage | 7 to 30 Vdc | |
| Current consumption | 1 mA typ. | |
| Operating temperature | 0 to 50°C | |
| Protection index | IP64 | |
| Cable length | 5 m |
Customer Support
If you ever need assistance with your sensor, or if you just have questions or feedback, please e-mail support@phyto-sensor.com. Please include as part of your message your name, address, phone, and fax number along with a description of your problem.
Bio Instruments S.R.L. 20 Padurii St., Chisinau MD-2002 REPUBLIC OF MOLDOVA Tel.: +373-22-550026
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>