XREXS 3039YK Remote Control Instructions

XREXS 3039YK Remote Control

Product Information

• Screen on/screen off Alarm clock function

• Enter/exit timer mode

• Increase the displayed value/Switch between 12-hour system and
  24-hour system

• Timer start/timer stop

• Remote control

• Language/DST/Year/Month/Date/Time Settings

• Switch between c and f

• Timer reset

• FCC Warning

Product Usage Instructions

• To use the screen on/screen off Alarm clock function, refer to the specific instructions in the user manual.
• To enter timer mode, press the corresponding button on the device. To exit timer mode, press the same button again.
• To increase the displayed value or switch between the 12-hour and 24-hour system, use the designated button. This button is used to increase the Hour value in timer mode.
• To start or stop the timer, use the timer start/stopbutton.
• If the product includes a remote control, refer to the remotecontrol instructions for its usage.
• To set the language, DST (Daylight Saving Time), year, month, date, and time, navigate to the settings menu and use theappropriate buttons to switch between options.
• To switch between Celsius (c) and Fahrenheit (f), use thedesignated button.
• To reset the timer to zero, press the timer reset button.

FCC Warning:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority tooperate the equipment. To minimize interference, try the following:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician forhelp.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

remote control

FCC

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>