Remote Tech RT-HK4F29 Electronic Key User Manual
- June 12, 2024
- Remote Tech
Table of Contents
Remote Tech RT-HK4F29 Electronic Key
Product Information
FCC ID | 2AOKM-HK30 |
---|---|
IC | 24223-HK30 |
Model | RT-HK4F29 |
Part Number | RT-S8010 |
This electronic key is designed to provide remote control functionality for your vehicle. It allows you to lock and unlock the vehicle doors and trunk/hatch, as well as control other features such as the liftgate (if equipped) and remote start.
The electronic key is equipped with the following buttons:
- LOCK Button: Pressing this button locks all the doors of the vehicle.
- UNLOCK Button: Pressing this button unlocks the driver’s door. Pressing it again within 5 seconds unlocks the other doors.
- Liftgate Unlock Hold Button: Press and hold this button to open the liftgate if your vehicle is equipped with a power liftgate.
- PANIC HOLD Button: Pressing this button activates the vehicle’s alarm system, sounding the horn and flashing the hazard lamps. To stop the alarm, press any button on the electronic key.
- Forward button and Backward button: These buttons are used to control the Remote Forward/Backward function. While the button is pressed, the vehicle moves in the corresponding direction.
- REMOTE START Button: Press this button twice within 5 seconds to activate the Remote Start mode. The vehicle will stay in this mode for a 15-minute cycle. To exit the Remote Start mode, press and release the remote start button once.
The electronic key complies with part 15 of the FCC Rules and is subject to certain conditions to avoid interference. It must not cause harmful interference and must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not approved by the responsible party could void the user’s authority to operate the equipment.
FCC STATEMENT
User’s Manual Electronic Key
- FCC ID: 2AOKM-HK30
- IC: 24223-HK30
- MODEL: RT-HK4F29
- PART NUMBER: RT-S8010
- This remote has lock, unlock, Liftgate Unlock Hold Button , Forward button and Backward button, remote start Button and panic hold buttons; you can lock and unlock the vehicle doors and trunk/hatch with the remote transmitter.
LOCK Button
- When you press the LOCK button, it locks all the doors.
UNLOCK Button
- Pressing the button unlocks the driver’s door. Pressing the button again within 5 seconds unlocks the other doors.
Liftgate Unlock Hold Button
- Press and Hold. Will open if equipped with power liftgate
- PANIC HOLD Button: When you press the PANIC button, the vehicle will start sounding the horn and flushing the hazard lamp. To stop the alarm, press any button on the electronic key.
Forward button and Backward button
- When using the Remote Forward/ Backward function, the vehicle moves in the direction of the button while the button is pressed.
- REMOTE START Button: Press the remote start button twice within 5 seconds. The vehicle will stay in the Remote Start mode for a 15-minute cycle. Press and release remote start button once to exit Remote Start mode.
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC WARNING
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>