FISHER PAYKEL AHP3RD3084W Professional Round Flush Handle Kit for Integrated Refrigerator Freezer User Guide
- June 12, 2024
- Fisher & Paykel
Table of Contents
FISHER PAYKEL AHP3RD3084W Professional Round Flush Handle Kit for
Integrated Refrigerator Freezer
Product Information
The Professional Round Flush Handle Kit is designed for use with Integrated Refrigerator Freezers. It is compatible with the RS2484W and RS3084W models. The kit includes two pieces.
The dimensions of the handle kit are as follows:
- Height: 1 – 1 7/16 inches
- Width: 28 5/8 inches
- Depth: 25 7/16 inches
The SKU of the product is 25922.
Please note that the dimensions and specifications mentioned here are specific to this product and model. Fisher & Paykel reserves the right to change these dimensions and specifications at any time under their policy of continuous improvement. To ensure that you have the most accurate and up-to-date information, it is recommended to contact Fisher & Paykel’s Customer Care Centre.
Product Usage Instructions
To install the Professional Round Flush Handle Kit for Integrated Refrigerator Freezer, follow these steps:
- Ensure that the refrigerator freezer is properly installed and positioned.
- If applicable, remove any existing handle or trim from the refrigerator door.
- Identify the location on the refrigerator door where the handle will be installed.
- Align the holes on the handle with the pre-drilled holes on the refrigerator door.
- Insert the provided screws through the holes on the handle and into the pre-drilled holes on the refrigerator door.
- Tighten the screws securely to firmly attach the handle to the refrigerator door.
If you are pairing the handle kit with a Fisher and Paykel stainless steel door panel or cabinetry panel, please consult your cabinet maker for the appropriate installation instructions.
If you have any questions or need further assistance, you can contact Fisher & Paykel’s Customer Support at T 1.888.936.7872 or visit their website at www.fisherpaykel.com.
Professional Round Flush Handle Kit for Integrated Refrigerator Freezer, 2 Piece Compatible with RS2484W, RS3084W Pair with a Fisher and Paykel stainless steel door panel or cabinetry panel made by your cabinet maker
DIMENSIONS
- Height: 1 – 1 7/16
- Width: 28 5/8 & 25 7/16
- Depth: 2 1/4
- SKU: 25922
The product dimensions and specifications in this page apply to the specific product and model. Under our policy of continuous improvement, these dimensions and specifications may change at any time. You should therefore check with Fisher & Paykel’s Customer Care Centre to ensure this page correctly describes the model currently available. ? Fisher & Paykel Appliances Ltd 2020.
A PEACE OF MIND SALE
- 24 Hours 7 Days a Week Customer Support
- T 1.888.936.7872 W www.fisherpaykel.com