Kingwell M10 Wireless Lavalier Microphone User Manual

June 12, 2024
Kingwell

Kingwell M10 Wireless Lavalier Microphone User Manual
Wireless Lavalier Microphone

Introduction

Thanks for choosing Kingwell. This product is a set of wireless lavalier microphones that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in social media contents, online live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions.
The wireless microphone set consists of 2 microphone transmitters and 1 receiver. (See as below picture)

Microphone Transmitter
2 Microphone Tranmiters

1 Receiver

Product Diagram

Product Overview

  1. Furry Windscreen
  2. Microphone Indicator Light
  3. Microphone Charging Port
  4. Microphone Clip
  5. Microphone Switch Key
  6. Connector for iPhone
  7. Receiver Indicator Light
  8. Spare Interface Port
    The function of above 18) Spare Interface Port will be explained in.

Usage Method

Step 1 : Plug the receiver into the interface of your iPhone.
Usage Method

This product is designed for iPhone/iPad specially and can’t be used for Android Please make sure the interface type of your equipment.

Step 2: Press 5 Microphone switch key for about 1 second to power on the transmitter. Then 2 Microphone indicator light keeps green.
Power Button

The 2 microphone are controlled by each own switch key separately. If you need to use 2 microphone transmitters at once please remember press the switch keys of both 2 microphone.

Step 3: Make sure Receiver Indicator Light keeps on, which means the receiver is successfully connected to the transmitter. Open your phone camera or apps and start audio recording now.
Light Indicator

Special Note: For the use of ⓇSpare Interface Port:There is no battery in the receiver, and no need to recharge. If the battery of the phone is low during Live, it can be recharged directly through ⓇSpare Interface Port.
Connection

Indicator Light

Microphone Transmitter

Function/Status Operation Light Status ( Miaophone Indicator Light )
Power On Press ®Microphone Switch Key for about 1 second Red and green

lights flash alternately
Power Off| Press 5 Microphone Switch Key for about 3 seconds|  Light off
Paired| /| Green ight keeps on
Mute Mode On| Quickly press ® Microphone Switch Key twice|  Slow flashing green light
Mute Mode Off|  Quickly press ® Microphone Switch Key twice| Green light keeps on
Reverb Mode On| Quickly press ® Microphone Switch Key 3 times| Red light flashes once and then green light keeps on
Reverb Mode Off| Quickly press ® Microphone Switch Key 3 times|   Red light fbshes once and then green light keeps on
Low Battery Alarm| /| Slowflashing red light every 10 seconds
Charging| /| The red light keeps on and goes out afterfuly charged

Note: When the microphone turns on, the noise cancellation function opens automatically

Microphone Receiver

Function/Status Operation Light Status (OReceiver Indicator Light)
Power on Plug in the device Slow flashing red light
Power off  Plug off the device Light off
Paired / Red light keeps on

Packing List

Content of Packing

  1. Microphone Transmitter *2
  2. Microphone Receiver* 1
  3. Dual Charging Cable * 1
  4. Waterproof Portable Storage Bag *1
  5. User Manual *1

QR Code
Welcome to visit the official website to know more about Kingwell.

Email: http://www.kingwell.shop

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals