Kappers Fabricating 101360 Polaris Ranger 570 Double Tube Bumper Instructions
- June 12, 2024
- Kappers Fabricating
Table of Contents
**Kappers Fabricating 101360 Polaris Ranger 570 Double Tube Bumper Instructions
**
Kit Components
| Item # | Qty | Description |
|---|---|---|
| 1 | 1 | Bumper |
| 2 | 1 | Bumper Bracket Driver Side |
| 3 | 1 | Bumper Bracket Passenger Side |
| 4 | 1 | Bumper Hanger Bracket Driver |
| 5 | 1 | Bumper Hanger Bracket Passenger |
| 6 | 4 | Bumper Tube Cap |
| 7 | 1 | HK-343 |
| 7.1 | 8 | 5/16”-18 x .75 Hex Flange Bolt GR5 |
| 7.2 | 6 | 5/16”-18 x .75 Carriage Bolt GR5 Black |
| 7.3 | 14 | 5/16”-18 Nylock Hex Flange Nut GR5 |
| 7.4 | 2 | 5/16” x 1 Hex Flange Bolt Self-Tapping Type F Zinc (NOT USED) |
| 7.5 | 2 | 1/4” X .75 Hex Flange Bolt Self-Tapping Type F Zinc (NOT USED) |
Installation
-
Assemble tube caps (6) to bumper tubes as shown in Figure 1.
-
Hold passenger side bumper bracket (3) in place over bed hinge. Insert one 5/16” X .75 Hex Flange Bolt (7.1) and 5/16” Nylock Hex Flange Nut (7.3) on each side of bumper bracket as shown in Figure 2
-
Line up hanger bracket with hole in bed frame rail. Use two 5/16 X .75” Hex Flange Bolts (7.1) and 5/16 Nylock Hex Flange Nuts (7.3) to bolt hanger brackets to the bed frame rail and bumper brackets as shown in Figure 3. Repeat steps 2&3 for driver side.
-
Bolt bumper (1) to bumper brackets (2) using six 5/16 X .75” Carriage Bolts BLK (7.2) and 5/16 Hex Flange Nylock Nuts (7.3) Figure 4.
-
Evenly tighten all hardware
©2019 Copyright – Kappers Fabricating, Inc. All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>