CROSSBEATS Spark Newly Launched Spark Bluetooth In-Earbuds User Manual

Spark Newly Launched Spark Bluetooth In-Earbuds
User Manual Spark
USER MANUAL

OVERVIEW

1. Touch control
2. Microphone
3. Charging case LED
4. LED lights indicators
5. Charging Pin
6. USB-C Charging Port

POWER ON

Take out the earbuds from the charging case, it will automatically power On.

POWER OFF

Place the earbuds back in the charging case, the earbuds will power off automatically.

CHARGING

1. Connect and use the Type-C cable provided in the box for charging
2. Full charge in less than 60mins.

LED INDICATOR ON CASE

While charging – The white light keeps blinking based on the charge level
Low Battery (less than 10%) – The first light will be on for 3 secs
Battery full – All 4 lights will be on (4 lights – 100% power, 3 lights – 75% power, 2 lights – 50% power, 1 light – 25% power)
Current charge level – Check on the phone Bluetooth panel.

FIRST TIME PAIRING

1. Take out the earbuds from the charging case
2. The earbuds will auto power ON
3. Search for ‘CB-Spark’ in your phone’s BT list
4. Click to pair

MONO PAIRING

1. For mono mode, take out  either of the earbuds when already paired
2. The music will automatically play in that particular earbud

RESET

1. Ensure L&R earbuds are disconnected from all the devices, (turn off the Bluetooth option on the device which was connected before)
2. Put the earbuds in the charging case.
3. Press and hold the reset button on the case for 10 secs
4. The earbuds will flash red and blue light upon available for pairing

CONTROLS

NOTE: Available only on devices that are Voice Assistant enabled.  

  +91 80500 56565
**** +91 80500 56565
  support@crossbeats.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>