Rapid 06-8075 Digital Stopwatch Instruction Manual
- June 12, 2024
- Rapid
Table of Contents
Rapid 06-8075 Digital Stopwatch Instruction Manual
Instructions for use
After removing the stopwatch from its packaging, remove the small black tag from the bottom of the unit to engage the battery. Pull the tag firmly to remove. The display should now show the time and day of the week (normal display mode). The stopwatch is fitted with three mode operation buttons, as shown below.
Function Display Reading
Normal Display Mode shows: Hours, minutes, seconds (AM/PM) and the day of the
week.
Push A: to display Alarm time.
Push B: to change Mode.
Push C: to show the date (month, day of week).
Normal Time Setting
In normal time mode, press B three times to display the time setting.
(day of the week marker ‘Tu’ and seconds flash)
Press A to highlight Minutes and press C to select the desired value.
Now press A to highlight Hours and press C to select the desired value.
Press A to set the Date and press C to select the desired value.
Now press A to select the Month and press C select the desired value.
Press A to change the Day of the week, pressing C to cycle through the days,
which appear as dashes across the top of the display.
Finally press B to finish.
Stopwatch Function
Push B: for stopwatch function. Push C: for start & stop. Push A: for lap/split time & to reset.
Alarm & Chime ON/Off
Chime ON/OFF In normal time mode, hold button A, then push C. The chime symbol
will appear/ disappear. When the chime symbol is displayed the alarm is set to
ON.
Alarm Time Setting
In normal time mode, press B twice to display alarm setting. (day of the week
marker `Mo’ flashes) Change the hour by pressing C until the desired time is
set. Press A to highlight Minutes and press C until the desired time is set.
Press B to finish.
Battery
When the display readout becomes dim or nothing displays, it is time to
replace the battery. To replace the battery: Remove the back cover, by
loosening the screws and replace with new battery.
Replacement Batteries:
LR44 1.5V Alkaline Button Cell x2 or UCC 392, Renate 2.