FISHER PAYKEL EB30PSX1 30 Inch Triple Stack Professional Style Instruction Manual
- June 12, 2024
- Fisher & Paykel
Table of Contents
FISHER PAYKEL EB30PSX1 30 Inch Triple Stack Professional Style Instruction
Manual
PLANNING GUIDE 30″ Professional Triple Stack
This Planning Guide outlines the specific installation of a flush finish with front cabinetry for the 30″ Triple Stack, with Professional Style appliances.
Cabinetry dimensions and construction contained in this document are a guideline only and will need to be adapted to suit specific location, cabinetry materials and construction methods.
Please consult individual product literature for full installation instructions.
Contemporary and Minimal Style appliances have different cabinetry requirements, please refer to separate Planning Guide for these specifications.
DATE: 09.11.2021
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16”). Read the installation guide for detailed information on installing the product. For full installation instructions and specifications visit fisherpaykel.com
COMBINATION OVERVIEW 30″ Professional Triple Stack
OVERALL DIMENSIONS 30″ Professional Triple Stack
KEY PRODUCT DECISIONS
- UPPER PRODUCT FUNCTION
Coffee Maker, 30″
Speed Oven, 30″
Steam Oven, 30″
STYLE
| Coffee Maker, 30″| Speed Oven, 30|
Steam Oven, 30″
---|---|---|---
PROFESSIONAL| EB30PSX1| OM30NPX1| OS30NPX1
2. OVEN
Oven, 30″ (shown with Long Trim fitted)
Oven, 30″: OB30SPPTX1
- DRAWER FUNCTION
Vacuum Seal Drawer, 30″
Warming Drawer, 30″
Vacuum Seal Drawer, 30
|
Warming Drawer, 30″
---|---
VB30SPEX1| WB30SPEX1
KEY PRODUCT DIMENSIONS 30″ Professional Triple Stack
COFFEE MAKER, 30″
OVEN, 30″ Shown with Long Trim fitted
SPEED OVEN, 30″
WARMING DRAWER, 30″
STEAM OVEN, 30
VACUUM SEAL DRAWER, 30″
LOWER TRIM DETAIL OF UPPER PRODUCT 30″ Professional Triple Stack
IMPORTANT
The Coffee Maker and Cook Product (Speed Oven or Steam Oven) share the same
overall front frame dimensions H x W x D. However there is a critcal
difference in the relationship between the front frame with the base of the
chassis. This dimensional difference between the Coffee Maker and Cook
Product, results in the Coffee Maker requiring additional cabinetry
components. These details are outlined in the following pages.
COFFEE MAKER
PROFILE VIEW
COOK PRODUCT
PROFILE VIEW
DETAIL A – COFFEE MAKER
PROFILE VIEW
DETAIL B – COOK PRODUCT
PROFILE VIEW
CABINETRY OVERVIEW 30″ Professional Triple Stack
IMPORTANT
- Shelves must be constructed from materials that will support weight of appliances.
- The cabinetry materials must be able to withstand heat.
- During installation appliances may need to be shimmed for precise alignment between products and cabinetry.
- Power cable requirements and cable outlet position can be found by consulting individual product installation manuals.
- Consult individual product installation manuals for complete product and cabinetry requirements
This is an overview of cabinetry construction and product installation. Please
see following pages for further details.
IMPORTANT
During installation appliances may need to be shimmed for precise alignment
between products and cabinetry.
MPORTANT NOTE:
MINIMUM and CRITICAL dimensions are stated to meet product installation
requirements and compliance standards. Where these dimensions are not adhered
to product safety and performance may be compromised, along with undesirable
fit in cabinetry
SIDE ELEVATION
without front panels
RECOMMENDED
29 15/16″ 760mm Width of cabinetry front panels
FRONT ELEVATION
without front panels
SIDE ELEVATION
with front panels
INSTALLATION DETAILS – PROFILE VIEW 30″ Professional Triple Stack
PROFILE VIEW
DETAIL B1 – COFFEE MAKER PROFILE VIEW
- NOTE: Shims are supplied with Coffee Maker, however an additional spacer or shims will be required to achieve this solution.
DETAIL B2 – COOK PRODUCT
PROFILE VIEW
DETAIL A
PROFILE VIEW
DETAIL C
PROFILE VIEW
NSTALLATION DETAILS – PLAN VIEW 30″ Professional Triple Stack
- NOTE: Dimensions based on 1/16″ (1.5mm) clearance between Drawer and adjacent panels. Product widths vary, consult detail views D1 and D2 for Oven and Coffee Maker or Cook Product clearances.
DETAIL D – DRAWER
PLAN VIEW
DETAIL D1 – COFFEE MAKER OR COOK PRODUCT with rebate: PLAN VIEW
DETAIL D2 – OVEN with rebate: PLAN VIEW
THESE INSTRUCTIONS ARE FOR THESE SPECIFIC INSTALLATION SCENARIOS. OTHER CABINETRY CONSTRUCTION METHODS ARE POSSIBLE. PLEASE CONSULT PRODUCT INSTALLATION MANUALS FOR FULL PRODUCT SPECIFICATIONS AND CLEARANCE REQUIREMENTS.
IMPORTANT: The product dimensions and specifications apply at the date of issue. Under our policy of continuous product improvement, these dimensions and specifications may change at any time. Dimensions may vary by ±2mm (1/16″). Please read the installation guide for detailed information on installing the product or visit fisherpaykel.com. November 2021 ****
Documents / Resources
|
FISHER PAYKEL EB30PSX1 30 Inch Triple Stack Professional
Style
[pdf] Instruction Manual
EB30PSX1 30 Inch Triple Stack Professional Style, EB30PSX1, 30 Inch Triple
Stack Professional Style, Triple Stack Professional Style, Stack Professional
Style, Professional Style, Style
---|---