INTEX Ladder with Removable Steps Owner’s Manual

June 12, 2024
INTEX

INTEX Logo OWNER’S MANUALINTEX Ladder with Removable Steps Ladder with
Removable Steps
48” (122cm) & 52” (132cm) models
For illustrative purposes only.
52” (132cm) Shown

IMPORTANT SAFETY RULES

Read, understand, and follow all instructions carefully before installing and using this product.
SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY RULES

Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.
WARNING

  • Supervise children and those with disabilities at all times.
  • Alwaysassistchildrenwhentheyusetheladdertoavoidfalls  and/or serious injury.
  • Neverdiveorjumpfromthisladder.
  • Locate the ladder on a level, solid base.
  • One person on this ladder at a time.
  • Maximumload:300lbs(136kg).Complies with EN16582 strengt hrequirements.
  • Face the ladder at all times for entry/exit of pool.
  • Remove and secure ladder when pool is not occupied.
  • Do not swim under, through or behind ladder.
  • Checkallnutsandboltsregularlytoensureladderstayssturdy.
  • If swimmin gatnight use artificiallig htingt oilluminateal lsafety signs,ladders,pool floor and walk ways.
  • Assembly and disassembly by adults only.
  • This ladder is designed and manufactured for aspecificpool wall heightand/ordeckofthepool.Donotusewithotherpools.
  • Failuretofollowthemain tenanceinstru ctionsand warnings may resultinadversehealtheffectsorinjury,particularlytochildren.
  • Only usethisl add erforthe purposes described inthismanual.

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN BROKEN BONES, ENTRAPMENT, PARALYSIS, DROWNING OR OTHER SERIOUS INJURY.
These product warnings, instructions and safety rules provided with the product represent some common risks of water recreation devices and do not cover all instances of risk and danger. Please use common sense and good judgment when enjoying any water
activity.

PARTS REFERENCE

Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.
48” (122cm) model

INTEX Ladder with Removable Steps - model

52” (132cm) model

INTEX Ladder with Removable Steps - model 1

NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.

REF. NO. DESCRIPTION QUANTITY SPARE PART NO.
48″ 52″
48″ 52″ #28076 #28077
1 U-SHAPED TOP RAIL 2 2
2 TOP PLATFORM 1 1
3 CLASP 2 2
4 SHORT FASTENER FOR U-SHAPED TOP RAIL (WITH 1 EXTRA) 11 9
5 LONG FASTENER FOR TOP PLATFORM (WITH 1 EXTRA) 5 5
6 A SIDE – UPPER SIDE LEG (MARKED “A”) 1 1
7 A SIDE – UPPER SIDE LEG (MARKED “B”) 1 1
8 A SIDE – LOWER J- LEG (MARKED “A”) 1 1
9 A SIDE – LOWER J- LEG (MARKED “B”) 1 1
10 STEP 6 8
11 STEP ANCHOR SLEEVE 12 16
12 B SIDE – UPPER SIDE LEG (MARKED “Al”) 1 1
13 B SIDE – UPPER SIDE LEG (MARKED “B1”) 1 1
14 B SIDE – LOWER SIDE LEG (MARKED “Al”) 1 1
15 B SIDE – LOWER SIDE LEG (MARKED “B1”) 1 1
16 C SIDE – UPPER SIDE LEG (MARKED “C”) 2 2
17 C SIDE – LOWER U-SHAPED SIDE LEG (MARKED “C”) 1 1
18 SUPPORT BASE 2 2

This ladder is designed and manufactured for Intex pool wall height:

Item # Pool Wall Height
28076 48” (122cm)
28077 52” (132cm)

IMPORTANT

It is very important to lay out the parts correctly and identify which parts connect together befor estarting the assembly.Although some parts looka like,they arenotalway sinter changeable.Refer to the parts list.

LADDER SETUP

TOOLS REQUIRED: One (1) Phillips screwdriver, one (1) small flat screwdriver One (1) pair of pliers or a small adjustable wrench Estimated assembly time 30-60 minutes. (Note the assembly time is only approximate and individual assembly experience may vary.)

WARNING

INCORRECTLYCONNECTEDPARTSMAYRESULTINANUNSTABLELADDEROR LADDERFAILUREWHICHCANCAUSEFALLINGANDPERSONALINJURYORDEATH.

  1. SIDE A LEGS ASSEMBLY (refertofigures1.1through1.4):INTEX Ladder with Removable Steps - ASSEMBLY MPORTANT: Ensure the J-shaped legs are pointing outwards before installing the stepsINTEX Ladder with Removable Steps - EnsureUPPER SIDE A LEGS ASSEMBLY (refer to figure 1.4):INTEX Ladder with Removable Steps - LEGS 

  2. SIDE B LEGS ASSEMBLY (refer to figures 2.1 through 2.4):INTEX Ladder with Removable Steps - SIDEINTEX Ladder with Removable Steps - LADDER• UPPER SIDE B LEGS ASSEMBLY (refer to figure 2.4):INTEX Ladder with Removable Steps - UPPER

  3. SIDE C LEGS ASSEMBLY (refer to figures 3.1 through 3.4):
    IMPORTANT: Make sure the legs are securely connected and locked.INTEX
Ladder with Removable Steps - SETUP

  4. TOP PLATFORM INSTALLATION (refer to figure 4):

  5. U-SHAPED TOP RAIL INSTALLATION (refertofigures5.1through5.2):

  IMPORTANT: One side a ta time.Do not attach the other side oft hela dde runtilthe U-shaped top raili sinstalled.Makes ureall nutsand boltsar esecurely tightened.Donot full ytigh tenfast ernersun till astassembly operation.INTEX
Ladder with Removable Steps - installed

  1. SIDE B LEGS INSTALLATION (refer to figure 6):INTEX Ladder with Removable Steps - LEGS 1

  2. MAINTENANCE: Regularly check all nuts,bolts,steps and stepan chors leevesto ensure all parts are secure dproperly and theladderissturdy.

  3. BEFORE USE OF LADDER (refer to figure 7):

With all parts no winplace,verify that allfasteners/screws arefullytigh tened and apply down wardpressuret oeachstep to besure the yarefully anchore dinplace.
IMPORTANT: The removable steps side must be located outside of the pool.INTEX Ladder with Removable Steps - LEGS 2

WARNING
BEFORE EACH USE, ENSURE THE REMOVABLE STEPS SIDE IS ANCHORED INTO THE SUPPORT BASE AND SECURELY LOCKED IN THE CLASPS LOCATED AT THE FRONT EDGE OF THE TOP PLATFORM.INTEX Ladder with Removable Steps - AFTERINTEX
Ladder with Removable Steps - Removing

WINTERIZING / LONG TERM STORAGE

  1.  Remove the “removable steps” as shown in the After Use of Ladder section, see figure 8.
  2. Remove the ladder from the pool, and make sure the ladder and the removable steps are thoroughlydrybeforelongtermstorage.
  3. Bringtheladderandallitscomponentsindoorsandstoreinasafeanddryarea,  preferably between 32°F (0°C) and 104°F (40°C).
  4. Besuretheladderandallcomponentsarestoredinasafeplaceawayfromchildren’s  reach.
  5. Step disassembly:

INTEX Ladder with Removable Steps - disassembly

WARNING

WHENNOTINUSE,LADDERSHOULDBEKEPTINSAFETYPOSITION.

REMOVETHEFRONTSTEPSSIDEWHENTHEPOOLISNOTINUSEOR OCCUPIED.STORETHEREMOVABLESTEPSSIDEINASAFEPLACE AWAYFROMCHILDRENREACH.CLOSETHECLASPSBACK.

GENERAL AQUATIC SAFETY

Water recreation is both fun and therapeutic. However, it involves inherent risks of injury and death. To reduce your risk of injury, read and follow all product, package and package insert warnings and instructions. Remember, however, that product warnings, instructions and safety guidelines cover some common risks of water recreation, but do not cover all risks and dangers. For additional safeguards, also familiarize yourself with the following general guidelines as well as guidelines provided by nationally recognized Safety Organizations:

  •  Demand constant supervision. A competent adult should be appointed as a “lifeguard” or waterwatcher,especiallywhenchildrenareinandaroundthepool.
  • Learn to swim.
  • Take the time to learn CPR and first aid.
  • Instruct anyone who is supervising pool users about potential pool hazards and about the use of protectived evice ssuchas locked doors,barriers,etc.
  • Instruct all pool users, including children what to do in case of an emergency.
  • Always use common sense and good judgement when enjoying any water activity.
  • Supervise, supervise, supervise. For additional information on safety, please visit:
  •  The Association of Pool and Spa Professionals: The Sensible Way to Enjoy Your
  • Aboveground/Onground Swimming Pool www.nspi.org 
  • American Academy of Pediatrics: Pool Safety for Children   www.aap.org
  • Red Cross   www.redcross.org 
  •  Safe Kids   www.safekids.org 
  •  Home Safety Council: Safety Guide  www.homesafetycouncil.org 
  • Toy Industry Association: Toy Safety  www.toy-tia.org

LIMITED WARRANTY

Your Intex Pool Ladder has been manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies to the Intex Pool Ladder only.
The provisions of this Limited Warranty apply only to the original purchaser and is not transferable. This Limited Warranty is valid for a period of 1 year from the date of the initial retail purchase. Keep your original sales receipt with this manual, as proof of purchase will be required and must accompany warranty claims or the Limited Warranty is invalid.
If a manufacturing defect is found within this 1 year period, please contact the appropriate Intex Service Center listed in the separate “Authorized Service Centers” sheet. The Service Center will determine the validity of the claim. If the Service Center directs you to return the product, please carefully package the product and send with shipping and insurance prepaid to the Service Center. Upon receipt of the returned product, the Intex Service Center will inspect the item and determine the validity of the claim. If the provisions of this warranty cover the item, the item will be repaired or replaced at no charge.
Any and all disputes regarding the provisions of this Limited Warranty shall be brought before an informal dispute settlement board and unless and until the provisions of these paragraphs are carried forth, no civil action may be instituted. The methods and procedures of this settlement board shall be subject to the rules and regulations set forth by the Federal Trade Commission (F.T.C.). IMPLIED WARRANTIES ARE LIMITED TO THE TERMS OF THIS WARRANTY AND IN NO EVENT SHALL INTEX, THEIR AUTHORIZED AGENTS OR EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER PARTY FOR DIRECT OR CONSEQUENTIAL DAMAGES OR LIABILITIES. Some states, or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This Limited Warranty does not apply if the Intex product is subject to negligence, abnormal use or operation, accident, improper operation, improper maintenance or storage, or to damage by circumstances beyond Intex’s control, including but not limited to, ordinary wear and tear and damage caused by exposure to fire, flood, freezing, rain, or other external environmental forces. This Limited Warranty applies only to those parts and components sold by Intex. The Limited Warranty does not cover unauthorized alterations, repairs or disassembly by anyone other than Intex Service Center personnel.
DO NOT GO BACK TO THE PLACE OF PURCHASE FOR RETURN OR REPLACEMENT.
IF YOU ARE MISSING PARTS OR NEED ASSISTANCE, PLEASE CALL US (FOR U.S.
AND CANADIAN RESIDENTS): 1-310-549-8235 OR VISIT OUR WEBSITE: WWW.INTEXCORP.COM.
Proof of Purchase must accompany all returns or the warranty claim will be invalid.INTEX Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals