tp-link G36 Wall Mountable Routers User Guide
- June 12, 2024
- tp-link
Table of Contents
tp-link G36 Wall Mountable Routers
Product Information
The product is a Wall Mountable Router. It is designed to be mounted on a wall for convenient use.
Wall Mounting Specification
Model| Screw Standard of ANSI B1.1| Minimum Length of Screw| Screw-Head-to-
Wall Minimum Distance| Wall-Mounting-Holes Distance
---|---|---|---|---
G36| 4# (5#) 6#| 7mm| 1.5mm| 150mm
ER7212PC| 4# (5#) 6#| 7mm| 1.5mm| 150mm
ER706W| 4# (5#) 6#| 7mm| 1.5mm| 150mm
ER7206| 4# (5#) 6#| 7mm| 1.5mm| 150mm
ER707-M2| 4# (5#) 6#| 7mm| 1.5mm| 150mm
ER605W| 4#| 6#| 7mm| 1.5mm| 150mm
ER605| 4# (5#) 6#| 7mm| 1.5mm| 122mm
TL-R470T+| 4# 5# 6#| 8.5mm| 1.5mm| 110mm
Product Usage Instructions
Wall Mounting Procedure
- Determine the location on the wall where you want to mount the router.
- Mark the wall where the two mounting holes are. The distance between the two marks must be the same as that between the two mounting holes of the router. Refer to the Wall Mounting Specification for the wall-mounting-holes distance.
- Using a screwdriver, drive the screws into the wall at the marked positions. Ensure that the Screw Head-to-Wall Minimum Distance specified in the Wall Mounting Specification is maintained.
- Mount the router on the wall, ensuring it is upright and not sideways.
Note: Before wall mounting the router, make sure you have the necessary tools, including a screwdriver and screws that comply with the corresponding standard specified in the Wall Mounting Specification.
Wall Mounting Preparation
Before mounting the router, you need to prepare the tools below:
- A screw driver.
- Two screws which complies to the corresponding standard. For details, see Wall Mounting Specification.
Wall Mounting Procedure
On the bottom of the panel, there are two mounting holes. You need to drive two screws into the wall, then mount the router on the wall. Note that the router should be mounted on the wall upright rather than sideways.
- Determine the location on the wall where you want to mount the router.
- Mark the wall where the two mounting holes are. The distance between the two marks must be the same as that between the two mounting holes of the router. For the wall-mounting-holes distance, see Wall Mounting Specification.
- Drive the screws into the wall at the marks using the screw driver. For the Screw-Head-to-Wall Minimum Distance, see Wall Mounting Specification.
- Mount the router on the wall.
Wall Mounting Specification
Model
| Screw Standard of
ANSI B1.1
| Minimum Length
of Screw
| Screw-Head-to-Wall
Minimum Distance
| Wall-Mounting-Holes
Distance
---|---|---|---|---
G36| 4# (5#) 6#| 7mm| 1.5mm| 150mm
ER7212PC| 4# (5#) 6#| 7mm| 1.5mm| 150mm
ER706W| 4# (5#) 6#| 7mm| 1.5mm| 150mm
ER7206| 4# (5#) 6#| 7mm| 1.5mm| 150mm
ER707-M2| 4# (5#) 6#| 7mm| 1.5mm| 150mm
ER605W| 4# 6# 8#| 9.7mm| 3mm| 161.85mm
ER605| 4# (5#) 6#| 7mm| 1.5mm| 122mm
TL-R470T+| 4# 5# 6#| 8.5mm| 1.5mm| 110mm
© 2023 TP-Link 1910013471 REV1.0.0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>