tp-link RE600X Wi-Fi Range Extender Installation Guide
- June 13, 2024
- tp-link
Table of Contents
Quick Installation Guide
Wi-Fi Range Extender
*Images may differ from actual products.
RE600X Wi-Fi Range Extender
Configure
Set up your extender via one of the methods.
Method 1: Via TP-Link Tether App
Get the up-to-date Tether app, and follow the app instructions to complete the
setup.
http://www.tp-link.com/support
Method 2: Via a Web Browser
-
Plug the extender into an electrical outlet near your router and press the power button if it has one.
-
Connect your computer to the extender.
Via Wireless
Disconnect your Ethernet connection from your computer and connect to the extender’s network (e.g. TP-Link Extender or TP-Link_Extender_XXXX).
Via Ethernet Cable (If the extender has an Ethernet port)
Disable the Wi-Fi on your computer. Connect your computer to the extender via an Ethernet cable. -
Launch a web browser and enter http://www.tplinkrepeater.net or http://192.168.0.254 in the address bar. Create a password to log in.
-
Follow the instructions on the web page to complete the initial configuration.
Relocate
To achieve better signal quality, plug in the extender halfway between your
router and the Wi-Fi dead zone. 
Enjoy!
Connect your device to the extender using the extended SSID and Wi-Fi password
that you’ve set during the configuration. The default Wi-Fi password is the
same as your host network.
Entertainment Adapter
If your extender has an Ethernet port, it can be used as a wireless adapter to
connect any Ethernet-only device such as a Blu-ray player, game console, DVR,
or smart TV to your Wi-Fi network.
First, connect the extender to your router, then connect your Ethernet-only
device to the extender via an Ethernet cable.
FAQ (Frequently Asked Questions)
Q2 How do I reset the extender?
A: With the extender powered on, press the RESET button until the LEDs turn on momentarily, then release the button.
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use the device where wireless devices are not allowed.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
TP-Link Three Years Limited Product Warranty
For TP-Link Branded Products Only.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).
TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH
ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.
TP-Link warrants the TP-Link branded hardware product contained in the
original packaging against defects in materials and workmanship when used
normally in according with TP-Link’s guidelines for a period of THREE YEARS
form the date of original retail purchase by the end-user purchaser.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives (EU)2015/863,
2014/53/EU, 2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at https://www.tp-
link.com/en/ce.
http://www.tp-link.com/support
For technical support, replacement services, user
guides, and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
© 2022 TP-Link 7106509605 REV3.2.0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>