PYLE PRO PCA1 2×15 Watt Stereo Power Amplifier User Manual

PYLE PRO PCA1 2×15 Watt Stereo Power Amplifier

Your New Pyle Pro Amplifier gives you the power and versatility you need in a professional sound system. The amplifier’s wide frequency response makes it suitable for amplifying music or vocal program material. PCA 1 can compatible with walkman and computerize devices (MP3) via 3.5mm to RCA converter. Please read this manual thoroughly before you attempt to set up and use the amplifier. It contains a range of installation suggestions as well as instructions to ensure safe usage. Installed properly, you can expect years of trouble-free service from this product.

Features and controls

1. Power ON LED Indicator
   • Lights to indicate power is turned on.
2. Master Volume Control
   • Lets you adjust the overall sound level.
3. RCA Cable L/R LINE Input
   • Lets you to connect the desired LINE input source.
4. PUSH-TYPE SPEAKER L/R TERMINALS
   • Lets you easily connect speaker wires directly to the Amplifier.
5. Voltage Selector
   • Lets you select the voltage of AC power input source. The amplifier has selectable input voltage from 110V/60Hz which is the standard in USA and CANADA. You can also switch the input voltage to 230V/50Hz for EUROPEAN operation. Please make sure the switch is in the proper position before operating, otherwise severe damage will result not cover by the warrnaty. Please also replace the fuse with proper rating in this situation (see the next instruction for the fuse rating).
6. Fuse
   • The amplifier uses a fuse for protection against surges and shor circuit. If the amplifier suddenly turns off and will not turn on, check the fuse, If necessary, replace it with a 1-amp, 250-volt, fast-acting, 5 x 20mm fuse (not supplied).

CARING FOR YOUR PYLE PRO AMPLIFIER
Your Pyle Pro Amplifier is an example of superior design and craftsmanship. The following suggestions will help you care for your amplifier so you can enjoy years of use:

• Keep the amplifier dry. If it gets wet, wipe immediately.
• Use the amplifier only in well-ventilated installations.
• Handle the amplifier away from dust and dirt.
• Wipe occasionally with a damp cloth to keep it looking new. Do not use harsh chemical, solvents or detergents!

IMPORTANT

• Replacing a fuse.
• This amplifier requires a fuse with the proper rating for protection from power surges and short circuits. If the amplifier suddenly turns off or will not turn on. the fuse is properly blown.
• Let the amplifier cool down and see if it start again before you assume a fuse needs to be replaced.
• Unplug the amplifier from the AC outlet.
• Turn the fuse holder cap and pull out the cap.
• Remove the old fuse and replace it with an identical one.

CAUTION : Never use a fuse with a higher rating.

TROUBLESHOOTING

Limited warranty

All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for one (1) year from the date of purchase. This warranty is limited to the original retail purchaser of the amplifier. Should the unitfall due to factory defects in material or workmanship,your unit well be repaired or replaced at the sole discretion of PYLE. To obtain warranty service, you must first call our Consumer Return Hotline at (718) 236 6948 to obtain a Return Authorization Number. This R.A # must appear on the outside of your package and on all paperwork relating to your return. When returning the unit to us for warranty service, it must be carefully packed and shipped, prepaid, to:

You must also include the following items with your return:

• A copy of your sales receipt or other proof of purchase
• A brief letter, indicating the problem you are experiencing with the product e Include in your return address, daytime phone number and R.A. number
• Also include a check or money order for $20.00 for return shipping, handling and insurance, or provide your Visa/ MC number with expiration date.

Our obligation under this warranty is limited to the repair or replacement of the defective unit when it is returned to us prepaid. This warranty will be considered void if the unit was tampered with, improperly serviced or subject to misuse, neglect or accidental damage.

SPECIFICATIONS

• Output power, 2 channels driven
• 4-OHM, 1 KHz, 1 % THD. 3.0Wx2
• 4-OHM, 1 KHz, 10% THD. 2.2Wx2
• Peak Power 5Wx2
• Total Harmonic Distortion, 1 KHz Rated Power 0.3 %
• Input Sensitivity, 1 KHz ,4-ohm Rated Power 150mV
• Frequency Response 20Hz – 40KHz
• Signal-to-Noise Ratio 75dB
• Power Requirement 120V AC 60Hz  or 230V AC S0Hz
• Dimensions 142.6x55x107mm (WxHxD)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>