AxFAST 3202 Electric Vehicle Portable Charger User Manual
- June 4, 2024
- AxFAST
Table of Contents
AxFAST 3202 Electric Vehicle Portable Charger User Manual
SAFETY INSTRUCTION AND INFORMATION
Carefully read this manual and the charging instructions in the owner’s manual of your electric vehicle before charging.
The following symbols may be found in this manual or on labels affixed to the Electric Vehicle Supply Equipment (EVSE), also known as EV Charger:
CAUTION: This symbol means be careful. You might do something that possibly result in damage to the equipment.
WARNING: This symbol means danger. DO NOT ATTEMPT TO REPAIR THE CABLE YOURSELF. You are in a situation that couldcause bodily injury. Before working on any electrical equipment,please be aware of the hazards involved with electrical circuitry and standard practices for preventing any accidents.
Please note:
- If EVSE is cracked, or is visibly damaged – DO NOT USE and contact Customer Support immediately. DO NOT ATTEMPT TO REPAIR THE DEVICE YOURSELF, which will void all warranty.
- TO REDUCE THE RISK OF ELECTRIC SHOCK, mount the product on the wall when charging at LEVEL 2/240 V.
- DO NOT PLUG INTO A RELOCATABLE POWER TAP. The charger should be plugged directly into a properly grounded outlet. Using any extension cord, adapters, other grounding wires or electrical connections in conjunction will void all AC CELL warranties.
- GROUNDING – This product features a three-prong grounded AC plug designed for use with a grounded three-prong power outlet. If the plug does not fit into the power outlet, do not force. Do not alter the plug. Contact a qualified electrician for information on installing a grounded outlet. Use with an inappropriate power outlet will void warranties.
- Make sure the product is positioned where it will not be stepped on or tripped over. Do not allow minors/children to operate device. Adult supervision is mandatory when EVSE is in use.
- HEAT – Do not expose product to direct sunlight or place it near a heater or in an enclosed area prone to high heat.
FCC INFORMATION
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This product has been designed to protect against Radio Frequency Interference (RFI). However, there are some instances where high powered radio signals or nearby RF producing equipment (such as digital phone, RF communications equipment, etc) could affect the operation.
If you suspect your charger is receiving interference, we suggest the following steps be taken before contacting AC CELL Customer Support for assistance:
- Reorient or relocate nearby electrical appliances or equipment during charging.
- Turn off nearby electrical appliances or equipment during
CAUTION: Changes or modifications to this product by other.
PACKAGE CONTENT
- 1x AxFAST EVSE
- 1x female NEMA 6-20 to male NEMA 5-15 adapter 1x carry case
- 4x screws and drywall anchors
SPECIFICATION
AxFAST P-120240V.USA is a dual voltage (120/240V nominal) system with automatic voltage detection and dead band restriction to provide maximal versatility with regulatory complied safety protection.
Please check on the back label of your EVSE to ensure the correct charger model was purchased for your electric vehicle, and the correct household utility circuit can support it.
| Model | AxFAST P-120240V.USA |
|---|---|
| Charging Gun & Power | SAE J1772 |
3.84kW @ 16A/240V
Plug & Voltage| NEMA 5-15| 120V
NEMA 6-20| 240V (Up to 3x Faster)
Cable Length| 24.6 ft EVSE| 1 ft adapters
Environmental Rating| Indoor/Outdoor| IP55 waterproof
Storage Temperature| -22°F to 158°F (-30°C to 70°C)
Operation Temperature| -22°F to 122°F (-30°C to 50°C)
Dimension| L4.6″ x W2.6″ X H11.6″, excluding charging cable
Weight| 8 lbs.
- The EVSE draws up to 80% of the outlet’s rated current as a safety precaution, meeting regulation requirement.
- For 120V system, the operation range is 90V ~ 135V for Under Voltage Protection (UVP) and Over Voltage Protection (OVP).
- For 240 V system, the operation range is 190V ~250V, if not otherwise specified.
REQUIRED ADAPTERS AND OUTLETS
To purchase optional adapters, visit our website at www.accellww.com.
This product requires the use of a EARTH grounded outlet. The utility socket for the EVSE’s plug must have “ground” or “earth” line properly functioning. If this product should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock.
CAUTION/WARNING:
AxFAST will not function if the EARTH GROUNDED of the outlet is missing. This
means the two-pin type AC socket is not suitable for electric vehicle
charging. Please consult a professional electrician for details.
CHARGING YOUR ELECTRIC VEHICLE (EV)
-
Plug the EVSE into an appropriate wall outlet and wait until the
blue POWER LED is lit non-blinking. -
a) Make sure that the appropriate adapter is used for the outlet. Refer to Section 5 for required adapters and outlets.
-
Plug the connector of Ax FAST into your electric vehicle’s charging inlet,making sure it is safely secured.
-
The EVSE will self-test for 5 seconds and start charging automatically. Refer to green light on front panel for indication of charging status. Either 120V or 240V will light up matching auto-sensing charge.
-
a) If yellow light on the panel is lit, there may be a loose connection. Disconnect the connector and reconnect. For more information on the indicator lights, refer to Section 7.
-
Charging is complete when green light turns off. Disconnect by pressing the release bottom at the charging connector.
-
Remove the plug of the EVSE and store it properly. If storing the EVSE in the carry case, there commended positioning is as follows: wrap the cable around the unit and place the charging coupler to the right.
THE FRONT PANEL LED INDICATORS
There are four LED indicator lights on the front panel of AxFAST.
The following table shows the status of AxFAST indicator lights. It is intended for user’s reference.
POWER| 12OV| 24OV| CHECK CONNECTION| Possible
Condition
---|---|---|---|---
Off
| Off
| Off
| Off
| No Power to the EVSE, check circuit breaker
On
| Off
| Off
| Off
| Ready to plug into electric vehicle to charge or electric vehicle is fully
charged
On
| On
| Off
| Off
| Electric vehicle is being charged at 120V
On
| Off
| On
| Off
| Electric vehicle is being charged at 240V
On
| Off
| Off
| On
| Electric vehicle draws over the upper limit current, DO NOT attempt to
plug/unplug the connector if error persists.
On
| Blink
| Blink
| Blink
| The operating temperature is high possibly due to insufficient ventilation.
PLEASE ensure cool surrounding air. If problem persists, DO NOT use device.
| On
| Off
| Blink
| Blink
| ACCELL EVSE self-test failed. DO NOT attempt to plug/unplug the connector if
error persists
| Blink
| Off
| Blink
| Blink
| Short circuit or current leakage detected, please DO NOT use device.
| Blink
| Blink
| Blink
| Blink
| Initial Power-On, allow for 5 seconds of self-test
| Blink
| Blink
| Off
| Off
| No EARTH ground connection at the utility outlet, not possible to charge the
vehicle. Please consult electrician.
| Blink
| Blink
| Blink
| Blink
| [Blink in turn] MCU internal error, the EVSE is no longer functional. Please
contact ACCELL Customer Support.
| On
| On
| On
| On
| Welding relay detected, please DO NOT use device
| Off
| On
| On
| Blink
| Under Voltage Protection or Over Voltage Protection, please consult
electrician.
INSTALLATION
Connection of our EVSE is easy. Simply find the corresponding socket and plug in to charge.
If permanent installation is preferred,place the unit on a flatwall surface
and using the screws and drywall anchors, attach the mounting bracket securely
to the wall.
See figure for the recommended electric vehicle connector and cable position
when not in use.
MAINTENANCE
The product requires no periodic maintenance other than occasional cleaning.
WARNING: To reduce the risk of electrical shock or equipment damage, please note the following.
- User must unplug the AC plug or turn off the circuit breaker connected to the EVSE before cleaning.
- Clean the EVSE using a soft cloth lightly moistened with mild detergent solution. Never use any type of abrasive pad, scouring powder, or flammable solvents such as alcohol or benzene. Do not spray water directly onto the EVSE.
- The EVSE contains no user serviceable components. Please refrain from repairing the unit on your own and refer to Front Pane
- l Lighting for troubleshooting.
CUSTOMER SUPPORT
Our customer support can be reached at support@ACCELLww.com. Toensure efficient service, please include the following information:
- Your name and phone number
- Invoice date and name of company purchased from
- Detailed description of your concern, include photos or videos if available
Version 1.0.6.7
Copyright © 2018. ACCELL Corporation
All rights