IWONLEX Technology DW17 Smart Fitness Watch User Guide

Fitness Smart watches
DW17

User Guide

Touch And Key Operation Instructions

Touch Operating
instructions| slide down| Control interface| Right slip| Quick Sidebar
---|---|---|---|---
Upslide| SMS notification| Left slip| Quick functions
Long
press| Dial switch| |

For detailed product functions, please go to the APP to learn

Watch charging

This product is magnetic charging. One end of the charging cable is connected to the charging adapter via USB, and the other end is attached to the contact point on the back of the watch. The watch screen will display the charging indication, and the charging will start

Note: Connect USB interface to charger with output current of 1A or above or USB interface of computer for charging

Download InstallationAPP

Use your mobile phone to scan the QR code below, download and install the APP, or use an Android phone to go directly to App Store, or use an Apple phone to go directly to the Apple Store, and search for “FitCloudPro” to download and install.

http://fitcloud.hetangsmart.com/qrcode/

Mobile phone system requirements：：
Android 5.1 and aboveIOS 8.2 or above

Connect the watch

1. can code connection: open the “Device” column under the “FitCloudPro” APP in the mobile phone, click to add the binding device on the top right of the device, and the QR code in the scan watch is paired and bound
2. Manual connection: After the mobile phone turns on Bluetooth, enter the “Device” column under the “FitCloudPro” APP, click Add Device, and manually connect the device by hand

•  Before pairing, ensure that the power of the watch is above 20% to avoid pairing due to insufficient power
• During the pairing connection, ensure that the Bluetooth of the mobile phone is turned on, the call audio of the watch, and the media audioopen
• To turn off call audio, media audio, click the phone icon to turn it on and off
• If the watch is not connected to the mobile phone APP for a long time or the power is cut off for a long time, the time will be inaccurate,APP synchronization required

Bluetooth data transmission
When connected to the mobile phone, the watch will instantly synchronize data with the mobile phone through Bluetooth, such as weather, notification messages, sports and health data, etc. These data will not be synchronized after disconnecting or turning off Bluetooth

Product parameters

Matters needing attention

• Do not disassemble, repair or modify the product without authorization
• Do not collide the product violently to avoid product damage
• Please avoid using in strong magnetic field, direct light or high temperature environment
• This product is not used for disease diagnosis, treatment and prevention.
• The waterproof grade of this product is IP67 to avoid being immersed in water for a long time
• Please avoid wearing the watch strap too tightly, and keep the contact position between the watch and the skin clean
• Children should use this product under the guidance of their parents to avoid harm。

Common problem handling
The watch cannot be switched on

• Please fix the power key for more than 3 seconds
• The battery may be too low, please charge it in time Bluetooth is not connected or cannot be connected
• Please try to restart the watch and reconnect
• Please try to restart the mobile phone Bluetooth and connect again
• The mobile phone should not be connected to other Bluetooth devices at the same time。

Inaccurate measurement of heart rate/blood pressure/blood oxygen/ECG

• It is generally caused by poor contact between the sensor of the watch and the human body during measurement
•  Please pay attention to the full contact between the sensor and wrist when measuring
• Keep your body still and watch close to your wrist during measurement
• For people with darker skin color and more hair on their arms, please enable enhanced measurement in App [Equipment>Enhanced Measurement]。

Sleep data is not accurate enough

• Sleep monitoring is to simulate the natural state of falling asleep and getting up, which needs to be worn normally
• Wearing it too late or when sleeping may cause errors
•  Sleep data is not monitored during the day, and the default sleep monitoring is from 9:30 p.m. to 12:00 p.m. the next day。

  **For more frequently asked questions, please check  the mobile app [My

FAQ]   
FCC Statement**
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>